RC Maker have released their brand new carbon body height adjuster set for touring cars. Featuring a simple and effective design, these super lightweight adjusters make it easier than ever to find tune the height of the bodyshell, without having to remove any pins, clips or o-rings. The adjusters feature 3 different height settings at 0.75mm increments (2.25mm of movement). They slide over the body post and locate on a 2mm pin and the assembly is then held in place by an o-ring which is slightly recessed into the top of the adjuster. To adjust the height, simply slide the adjuster and o-ring up, rotate it to a different slot and seat it back down. The adjuster can also be used on horizontal rear posts, and with their HRP System. This provides the body the perfect stopper to prevent excessive movement in the rear or damage when hit from behind. The adjusters are very light-weight coming in at only 0.5g and fit all popular touring cars with a 6mm post.