December 8, 2022

RC Maker Aligned Droop Blocks

RC Maker has introduced another staple to their line of setup tools with these Aligned Droop Blocks for 1:10 Onroad.  Taking everything they didn’t like about conventional droop blocks, they have created the ultimate pair of droop blocks for your pit table!  The unique shape of the blocks means that the contact patch of the blocks to your setup board and chassis is minimal, preventing imperfections in each surface from effecting your droop reading.  One major feature of these droop blocks is the ability to fix the distance between them, and keep them square to each-other!  When you place normal droop blocks down, they’re always in a different spot and always on some angle and not square to the chassis.  The Aligned droop blocks fix this problem, you can set the distance of the blocks and tighten the set screw on the blocks along the included titanium coated shaft. This keeps them in the same position all day, ensuring you can repeatedly put your droop blocks in the same position on the car and make sure they’re square to each-other.  When done for the day, loosen the set screws and disassemble down flat.  The droop blocks are machined from U.S Grade 7075 Alloy, and are extremely lightweight and strong.  They feature black anodising with silver chamfered edges, as well as a laser engraved RC Maker logo.

Source: RC Maker []


If you republish any elements from this page on another website, including text, original pictures or results please be sure to add a link back to this page as the source: