Radbody Mako Evo 1:28 ABS Hardbody with Lexan Roof

New from 1:28 body producer Radbody comes the Marko Evo, an ABS Hardbody with Lexan Roof.  The Mako Evo is designed to flow through each phase of the corner with plenty of steering. While it has less initial turn-in than the Piranha, it transitions to mid-corner and finishes with more rotation.  With the side clips installed, Mako Evo should weigh just over 24 grams. The new wing is based on designer Joe Chen’s first ever design in 2010.  The hump drops down in the back so you get the full chord height, but it still picks up the cleaner air farther from the body.  Molded in 0.5mm for more durability, it also has reinforcement ridges to reduce flapping, giving a more confident feel at high speeds.  The roof remains 0.3mm, and it is higher than the lexan versions of the Mako. Radbody has raised the roofline to match Piranha for two reasons, firstly for looks and secondly because it adds downforce in the mid-front of the car. There are also vents in the rear of the car to reduce the “parachute effect” under the body.  Radbody recommend using thin tape to cover them for different handling characteristics.

Source: Radbody [Facebook]