December 19, 2011

Philip Tschupp wins Stock at Italian Charity race

Philip Tschupp wins Stock at Italian Charity race

The annual Charity Race Italy took place at Scandiano recently, the location for round 2 of the ETS which will be held there in January. In Pro stock qualifying TOP Photon race Philip Tschupp, using the new Photon EX prototype brought it all together in the final round to take the TQ spot. In the first final Philip had very little steering and got pressured by Franceso Martini and Diego Macchioni. He had to block in every corner until Francesco made a mistake. Then it was Diego who put Philip under pressure. It was a very close race until Diego touched a curb and lost control of his car, so there was a gap between Philip and the other two local drivers and he could take the win. In the second final Philip changed his tire treatment and had much more steering and so could hold a little gap between his and Diego’s car. After a few minutes the Italian Champion closed up to the Swiss driver and they had a great battle but in the end it was Philip Tschupp who won the final to take the overall title ahead of Diego Macchioni in 2nd and Francesco Martini in 3rd.

Source: TOP [top-racing.jp]


December 19, 2011

Orcan BT5 Plus .21 off-road engine

Orcan BT5 Plus .21 off-road engine

A year after the release of BT5 engine from Orcan the .21 off-road engine has undergone further development and will be offered in an optimised version called BT5 Plus. Beside a couple of detailed improvements, the most important step comes from a new carburetor. A special idle needle screw makes the adjustment easier and also creates better response characteristics especially at low revs which is a very important aspect in off-road racing. Featuring five ports it comes with a combustion chamber for turbo plugs. As usual for Orcan engines, which are exclusively produced by Novarossi for SMI Motorsport, the BT5 Plus power plant comes in a handy Orcan multifunction bag.

View another image of the engine here


December 19, 2011

Jefferies clean sweep at European Pan Series Rd2

Jefferies clean sweep at European Pan Series Rd2

Round two of the European Pan Series visited Ardent Raceway in the UK. The entry was a little down on numbers possibly due to the pre Christmas date, but a strong field of top UK 1:12 drivers turned out including multiple World and European champion Dave Spashett, former European stock 1:12 champion Chris Kerswell and current UK national front runner Olly Jefferies. Nine heats covered F1, World GT, 1:12 and Mardave. In 1:12 it was Olly Jefferies who took TQ in both the stock and modified class, F1 TQ man was Mark Burgess and in the World GT class it was John Dawson setting the pace with his Xray.

Continue reading the report here


December 19, 2011

Yuichi Adachi joins KM International team

Yuichi Adachi joins KM International team

KM Group International have announced that 2010 All Japan National Sports Class Champion Yuichi Adachi has signed to race with KM for the coming season. Yuichi was looking for a new challenge and is joining the KM International Team with team mates like Dario Balestri, Meen V and Hang. He will attend many races as an International Team Driver like the All Japan Nationals, FEMCA and IFMAR World Championship, as well as all major races in Japan. Yuichi had the following to say about his new challenge:

I am very happy KM International give me this chance, I will do my best to represent KM brand and make good race result in the upcoming races. Especially, my goal for 2012 is to make grand final in 1/10 GP Touring IFMAR World in Thailand. I have a big confidence to my new car, H-K1, this is the best of the best GP sedan I have ever driven before. Also, I will do my best to support KM R&D staffs by using my 20 years of racing experiences, for KM Future products. See you guys in 2012 Worlds in Thailand.

Source: KM [km-rc.com]


December 18, 2011

LMR 201X brass bulkhead

LMR 201X brass bulkhead

New from Lee Martin’s LMR brand is this brass bulkhead for the Tamiya 201X. Used to help Lee win the 2011 European championship and make the IFMAR worlds A main, it adds 35g of weight over the front end. The block uses utlises plastic inserts to reduce wear and make maintenance less costly.

Source: LMR [l-m-racing.co.uk]


December 18, 2011

Matrix Tires re-signs Alexander Hagberg

Matrix Tires re-signs Alexander Hagberg

Matrix Tyres in Italy have confirmed that they have re-signed Swedish International racer Alexander Hagberg for the 2012 season. The Xray driver has been running these tires since the start of his career in nitro racing. “The quality and standard has always been perfect. They have been market leaders especially after the introduction of the very stiff and lightweight carbon rims. For next year I will use Matrix Tires also in the 1/12 class. My first race with those tires will be the 2012 Snowbirds in Orlando, Florida.”

Source: Matrix Tires [matrixtires.it]


December 17, 2011

Pro-Line & Protoform range of t-shirts

Pro-Line & Protoform range of t-shirts

Pro-Line and Protoform have released a number of new t-shirts to increase their range of merchandising. First up is the Surf style T-shirt in Silver, with its clean silver color and its simple but effective logo placement. The Pro-Line Urban style T-shirt in Slate Blue features a large street-style P-L logo front and center and a full Pro-Line logo on the back, along with a ghosted splattering of tires, cars and logos. For the ladies there is the Urban Girl style T-shirt in Pink which will make your girl look pretty in pink and beautiful around town. The shirt features a gorgeous floral pattern that will stand out from the crowd. Pro-Line is also donating 50% of the proceeds from all Urban Girl Pink shirts to the American Breast Cancer Foundation. Protoform have released a simple black shirt featuring large Protoform logos for the ultimate in pure RC race styling.

View the other shirts here


December 17, 2011

Arrowmax MTX5 universal joint set

Arrowmax MTX5 universal joint set

Arrowmax have released this universal joint set for Mugen MTX5. Extremely durable, they are made of a very strong and long life spring steel material, while the use of a CVD helps enhance the performance of the car compared to kit standard dogbones.

Source: Arrowmax [arrowmax-rc.com]