Red RC » Sebastian

November 10, 2017

Xray XT2 2018 1/10th 2WD stadium truck kit

Xray have introduced the 2018 variant of their EOS and US Championship winning XT2 1/10th 2WD stadium truck kit. The main difference from the previous version is the inclusion of both carpet and dirt-specific gearbox setups in the kit, allowing to built the truck for high and low grip conditions right out of the box. Included are both laydown and standup gearboxes, a gear differential for high-grip and a ball diff for low-grip surfaces, as well as hard and medium compound suspension plastics, carbon and composite rear shock towers, and also two battery brace setup, upper brace mounts and a composite gear cover. Also part of the updated package is a new, short front chassis brace that allows to mount graphite chassis side guards to adjust chassis flex and an updated outer steering link mount increases reliability. The kit is rounded out by new lower shock absorber bushings for more precise shaft movement, new shock O-rings for better sealing and shock performance as well as new suspension pin washers that prevent the pivot shafts from moving. The kit will hit stores very soon.

View the features and more images here

November 10, 2017

T-Works driveshaft pin replacement tool

T-Works have introduced their new driveshaft pin replacement tool for 1/8th scale kits. It is usable with most 1/8th scale on-road, off-road and GT kits and the kit includes a ratchet screw driver, the tool body, two push shafts and it comes in a handy box that protects the tool during storage and transportation. The tool body accepts driveshaft ball sizes below 8mm of diameter and 2.8mm to 3.0mm diameter pins. All parts are also available separately for spares and repair.

View another image here

November 10, 2017

Yannic Prümper returns to Yokomo factory team

Yokomo have announced the return of Germany’s Yannic Prümper to their factory team. Yannic grew up using Yokomo cars and buggies and he now comes back to the iconic Japanese manufacturer following a stint with other brands. Prümper will use the BD8-2018, YZ-2 and YZ-4SF platforms in his upcoming campaign that will see attendances at events such as the ETS, EOS and major races in Europe. Yannic says:

I would like to thank Team Yokomo for giving again the opportunity to use their excellent products. It feels good to be back in that Team where my RC carrier started and I grow up. I‘ll do my best in the future to deliver the best results!

Source: Yokomo [teamyokomo.com]

November 10, 2017

SWorkz S35-3 series Pro Composite radio tray set

Coming from SWorkz and made for the S35-3 series of off-road and on-road cars is the Pro Composite radio tray set. Included are a composite plastic 1-piece radio tray that is decked out with carbon fibre receiver and battery compartment covers. While looking the part the matte finish lids also reinforce the whole assembly for improved chassis stiffness. An additional mounting position further strengthens the radio box area. The radio tray set is usable with the S35-3 nitro buggy, S35-3 nitro truck and the S35-GT nitro GT car.

View another image here

November 10, 2017

Exotek Mini Apex GT-Z body & drag link set

Exotek have released a limited edition run of their popular GT-Z Mini Apex Touring body shell as well as a drag link set for the Team Associated RC18, Apex and Rival kits. Starting with the limited re-release of the GT-Z body for the classic Team Associated 18R and 1:18 Apex. The lid is all about performance with its high down force wing, sculpted fenders, sleek hood line and super low profile roof line. The GT-Z is designed with extra room in the wheel wells to eliminate wheel rub. The body comes clear and it fits 155mm to 165mm wheelbase cars.

Continue reading here

November 10, 2017

FX K501R 5-Port Racer Edition off-road engine

Coming from FX is their new K501R 5-port Racer Edition off-road engine. The power plant is designed for high-competition racing and features a silicone-filled crankshaft, Japanese-made premium front and German-made rear bearing and it made in at at FX in Slovakia. All parts are individually measured and inspected, and dimensions of all parts are recorded to ensure a full manufacturing and assembly record of every single part. Each engine includes a manufacturing certificate that records all the important serial numbers and measurements so that, at any time, all details of the production – including material batch, machine programs, responsible craft persons and production dates – can be traced back to their roots.

View the specifications here

November 10, 2017

Yeah Racing TT02 aluminium bumper plate

Adding protection and visual impact is Yeah Racing’s new aluminium bumper plate for the Tamiya TT02 touring car. The part is machined from high-quality aluminium, it comes blue anodised and with machined silver edge details. The brace is a direct replacement for the standard plastic part and it includes mounting hardware.

Source: Yeah Racing [yeahracing.com]

November 10, 2017

Andrei takes double Fxracing Indoor Series title

The final round of the 2017 UCS Fxracing Indoor Series was held recently. After an intense first two rounds, multiple national champion Jako Zsolt and current Mini-Z class champion Stroe Razvan were the main contenders. In the Buggy Stock 13.5T class, Andrei managed to take the victory after two heats, followed closely by Zsolt, Razvan and Liviu. Andrei then took the overall victory and was crowned Indoor Series Champion. In the 2WD Modified Short Course class, Andrei had strong competition from Zsolt but in the end, Andrei again took the victory and overall crown in this class.

Source: Team Associated [teamassociated.com]