Red RC » Sebastian

February 15, 2017

Riederer, Huber & Jeisy win at Islikon Masters Rd3

The third round of the Swiss Islikon Masters saw over 70 entries and in the 4WD Buggy class it was Adi Riederer (Xray) who brought home the win after the A-mains. Team Durango’s Philipp Huber came in second from Xray driver Kevin Prinz. In the 2WD class Philipp Huber (Team Durango) took home the hardware from Nico Schmid (Xray) in second and Fabian Luca Widmer in third while in the Mod Truck class Philip Jeisy lead an all-Xray podium with Martin Weidmann and Silvio Pietroboni coming in second and third respectively.

View the Truck podium here

February 15, 2017

T-Works BD8 & BD7 graphite bellcrank stiffener

T-Works have introduced a graphite bellcrank stiffener for the Yokomo BD8 and BD7 touring cars. Machined from carbon fibre and including a machined aluminium post and hardware the set allows to connect the steering bellcrank posts for improved torsional frontend stiffness while also allowing to connect the steering assembly with the upper deck for even more rigidity.

View more images here

February 15, 2017

FinTrack Tour Rd3 – Report

Round 3 of the Finnish Touring Car Nationals took place just outside of the southwestern city of Kouvola. Nearly 100 entries were on hand for the two-day event that featured Touring Car and Formula classes. In the Pro Stock 13.5 class Kalle Lehto, Kim Elfstrom and Vesa Yli were battling closely for the top spots. Previous round winner Kalle Lehto eventually earned the TQ position, followed closely by Kim in second with Vesa earning a second-row start in fourth. In the finals, Kalle took advantage of his pole position start to win in all three legs. Kim finished a close second with Vesa moving up a spot to finish third. With three rounds completed and one remaining, the 2017 Pro Stock championship comes down to a showdown between Kalle and Vesa – the dominant drivers in the class over the last two years.

Continue reading the report here

February 15, 2017

2017 Winter Indoor National Series – Report

This past weekend kicked off the first race of the 2017 JConcepts Indoor National Series at SmacTrac. Now in it’s 7th year, tweaks were made to add more top drivers, more support, and the results were already felt at the Winter INS with over 300 entries of the region’s best drivers along with top world talent as well. Smac Trac is no stranger to hosting the Winter INS and this year’s layout was extremely challenging, technical, and a whole lot of fun. The design consisted of a full-length straightaway paired with a classic sweeper that increased in radius which all flowed very well. Next, racers had to navigate a cut back step-on, step-off pie turn that required trigger mastery and timing genius. Perhaps the most difficult section on the track was the 90-degree hill turn that flowed into a double which landed into a left turn. Many cars were crashing or losing time here, but the ones that could execute it perfectly would gain a huge advantage. The risk was entirely up to the drivers as this section clearly marked the separation of driver skill level.

Continue reading the report here

February 15, 2017

Ethan Lefebvre triples at Thornhill Jr. club race

The recent Thornhill Jr. club race in Hutto, Texas saw Xray driver Ethan Lefebvre taking the TQ in the 2WD Buggy and Mod Truck classes. Ethan would then also take wins in both classes thanks to decent runs in the A-mains. Tyler Hooks (TLR) and Alex Vaughan (Xray) would round out the 2WD Buggy podium while Alex Vaughan (Xray) and Bill Delong (TLR) completed the Mod Truck top 3. Elsewhere in the 4WD Buggy class it was again Ethan Lefebvre (Xray) who came out on top of things after the A-main. Starting from the 2 spot on the grid after some troubled qualifiers, he was following the leader for about six minutes and with about one minute to go he was able to capitalise from lap traffic to take his third win of the weekend. The TLR duo of Tyler Hooks and Chris Allison would complete the top 3.

View the other podiums here

February 15, 2017

Avid X12 titanium ball studs & pivot balls

Avid have introduced three kits of titanium ball studs and pivot balls for the Xray X12 1/12th scale pan car kit. Machined from billet 6AI-4V titanium the parts are about 40 percent lighter than the standard steel balls without sacrificing strength and they utilise a 2mm Allen head for easy installation and removal. Available is a full 14-piece conversion kit including ten 4.2×6.5mm ball studs and four 5.8mm pivot balls as well as a 10-piece and 2-piece 4.2×6.5mm ball stud kit.

View the other sets here

February 14, 2017

Associated TC7.1 PSD shock system & CF bumper brace

Team Associated have introduced two new option parts for the TC7.1 touring car in the form of the Factory Team PSD shock system and a carbon fibre bumper brace. Starting with the PSD Position Sensitive Damping shock system, using the parts makes for a progressive damping that is determined by the piston’s position in the shock body. The more the shock is compressed, the more damping, giving the shocks a plusher feel. The secret lies in the tapered slots in the sleeves. As the piston passes through the narrower slot openings, more pack is achieved. Designed for the use on asphalt tracks with the TC7.1’s small shock bodies the set includes a pair of aluminium sleeves and plain shock pistons. Also new is a woven graphite bumper brace for the TC7.1 A direct replacement for the standard composite part, the carbon fibre brace improves overall stability, durability and it makes for improved visual impact.

View more images here

February 14, 2017

World Champion Products welcome Billy Easton

World Champion Products have announced the addition of veteran US racer, Billy Easton to their team. The Serpent designer and factory team driver will use the VS Racing buggy engines and tuned pipes in his 2017 1/8th nitro off-road campaign.

Source: World Champion Products [worldchampionproducts.com]