December 23, 2016

Agama A215SV 1/8th nitro buggy – Coming soon

Agama have released first details of the forthcoming A215SV 1/8th nitro off-road buggy. Taking the attributes of the A215 platform the SV version will feature a redesigned front end with C-Hub front steering geometry to make the car even easier to drive whilst providing more steering lock. The car will also utilise a new weight distribution and all details should become available in time for the release which is scheduled for early January.

Source: Nemo Racing [nemoracing.com]

December 23, 2016

Muchmore LCG 4mm Euro connectors

Muchmore have introduced the LCG 4mm Euro connectors. The bullet-type plugs are of a special low-profile design to better comply with 23mm LCG battery packs. They offer a 7mm diameter head section with a contoured soldering area for easier wiring and to allow routing the plus and wires under low top decks, making for tidier soldering jobs and an overall improved visual appearance. The connectors are usable with all battery packs outfitted with 4mm tube-type connectors and they come in sets of two.

Source: Muchmore [muchmoreracing.net]

December 23, 2016

Exotek Exo-Six flex top plate & TRF titanium rear axles

Coming from Exotek are the Exo-Six 2mm flex top plate and titanium rear axles for the Tamiya Evo6 and TRF419. Starting with the top plate, the part is made from 2mm carbon fibre and its design, with a full-length slot down the middle, offers more flex and traction for the Exo-Six conversion. The part is cut from US-made carbon fibre and it is available now.

Continue reading here

December 23, 2016

Elangears Elan R AI multi-chemistry DC charger

Elangears have introduced their new Elan R AI multi-chemistry DC charger. Based on the Elan R the AI variant comes with a new Lithium battery scan feature that makes for more convenient and secure battery charging. Before the charge process starts the device runs through a couple of routines, indicating the battery type and voltage to choose the best possible charge program and settings. After user confirmation the charger automatically starts the charging process and adapts the charging values if needed, based on the battery’s parameters such as voltage, current and internal resistance. The system is meant to minimise stress for the battery while still allowing for short charging times. With 100W of charge power the device allows for up to 10A or charge current with 1S to 6S LiPo, LiHV and LiFe batteries and it can also handle 1 to 14-cell NiMH batteries if needed. The charger is housed in a compact 91x120mmx45mm case and it features a backlit 2-lines, 16-characters LC display.

View the specifications here

December 22, 2016

JConcepts B6-series Elephant Trunk style waterfall

Another 3-D-printed part has been added to JConcepts’s Shapeways store in the form of the Elephant Trunk style waterfall for the Team Associated B6 and B6D. Designed for B6-series owners using a laydown transmission, the Elephant Trunk style waterfall replaces the stock unit and is more flexible than the stock piece. The part uses a single column support which promotes flex characteristics giving traction gains associated with these types of adjustments. The mount splits at the bottom to attach using the stock B6 hardware and uses the same pivot ball at the top making it a snap to install. The Elephant Trunk waterfall has already shown success in the hands of Alex Kosciuszek during the JConcepts Indoor National finals event by running the single fastest qualifying run over 5 minutes and it is available through JConcept’s Shapeways store here.

View another image here

December 22, 2016

RDRP B6-series brass electronics mounting plate

Coming from RDRP and made for the Team Associated B6 series of 2WD buggies is the brass electronics mounting plate. The 2mm plate is 0.5mm thicker and at 53g about 17g heavier than Team Associated’s own steel plate set while being designed to be a drop fit for the chassis’ machined pocket behind the steering servo. Using it allows to easily remove the speed controller and receiver from the car for cleaning and maintenance purposes while also adding weight to the buggy when running lightweight LCG battery packs. On top of this the black and golden design improves visual impact and the chamfered golden edges make for a smoother chassis-to-plate transition for further improved looks and functionality. The mounting plate fits both the B6 and B6D and it comes including suitable mounting hardware.

View another image here

December 22, 2016

Xray XT2 front anti-roll bars

Xray have introduce new optional front anti-roll bars for the XT2 stadium truck. Coming in addition to the standard 1.4mm variant are 1.2mm, 1.6mm and 1.8mm wires that help to fine-tune the front suspension for a range of traction conditions. All come made from high-quality spring steel, they sport laser-etched markings for easy identification and are available separately.

Source: Xray [teamxray.com]

Tonisport
Mibosport
LC Racing
VP Racing
SRT
Monaco RC
T-Works