Red RC » Sebastian

October 7, 2016

Jiri Mara wins at Czech Open Rd9

Round nine of the Czech Open series was held for the third time this year at the Horni Jeleni track. Conditions this time were pretty bumpy and the track also had much lower grip compared to the previous rounds. The overall TQ was obtained by Jiri Mara from Max Götzl and Kaja Novotny. The main final started and both Jiri and Kaja took off with no problem, fighting for the lead until about 10 minutes into the race when Kaja ran into engine troubles. Taking wider lines to clear the jumps Kaja was still able to proceed but with about 5 minutes to go his car stopped but his pit crew was able to restart the engine and Kaja was able to end the race at slower speed. Third placed Max Götzl also ran into troubles but was able to carry on. Up front Jiri took an easy win from Kaja and Max who had to settle for second and third respectively.

View the final results here

October 7, 2016

Max Power TQ-S 2017 2.1cc nitro engine

Max Power keep updating their nitro engine line with the latest addition being the TQ-S 2017 2.1cc 1/10th scale engine. Changes made compared to the previous power plant include a new back plate with flow cuts, an updated timing and the sleeve features extra cut-outs for improved mixture flow. The engine is rounded out by a new, silver anodised cooling head for maximised cooling efficiency.

View more images here

October 7, 2016

Igor Liptak wins at Slovakian Nitro On-road finale

The final round of the Slovakian National Nitro On-road Championship was held at the Hudy Racing Arena. The main final of the 1/10th 200mm Nitro Touring class saw some nice battles between Xray teammates Igor Liptak and Oliver Havranek with Igor ultimately holding the upper hand to take the day’s win from Oliver while Michal Abrahamek (Xray) had to settle for third following a bit of a tough ride.

Source: Xray [teamxray.com]

October 7, 2016

BRCA GT Nationals Rd1 – Report

The 2016/17 BRCA GT Nationals got under way last weekend at a new addition to the calendar, the event was hosted by Barley Mow RC Car Club in Birtley just outside Newcastle. Like last year the the event was split into two days with GT10 and F1 on Saturday and GT12 on Sunday. The club laid a great track for the weekends action, praised by many drivers over the weekend, it had a good mix of corners from fast and flowing to tight and technical. Onto the racing, Saturday started with the GT10 class. It was Andy Murray who set the pace. He was closely followed by young Ollie Payne driving the Roche P10. As the day progressed grip levels improved and the times got better and better. Andy Murray would continue to top the results board being the fastest in all four rounds of qualifying. Ollie Payne challenged Andy in all the rounds but just lacked a little consistency, he would line up second, followed by Mark Christopher with his Xray, Craig Nutting was in the fourth spot with his Roche less than two tenths from third. Bob Hill completing the top 5 with his CRC.

Continue reading the report here

October 7, 2016

ARC announce R11 2017 touring car kit

ARC have announced the soon release of the R11 2017 kit. The latest edition of the company’s popular electric touring car will utilise the drivetrain and suspension components of the current kit, with small refinements being made to further improve the performance and handling of the car. More information and images of the actual car will become available in time for the release.

Source: ARC [arc-rc.com.tw]

October 6, 2016

ECX upgrades 1/10th 2WD off-road line

Horizon Hobby have introduced the upgraded ECX line of 1/10th 2WD off-road RTR vehicles. The 2WD trucks, equipped with adjustable oil-filled shock absorbers, tough gearboxes with adjustable slipper clutch and gear differential as well as nylon composite chassis and long-travel suspension come with a new Dynamite 1800mAh LiPo battery and 800mA LiPo balance charger. The kits are rounded out by a Spektrum STX FHSS 2.4GHz radio system, 15T brushed motor, water-proof electronics and pre-painted bodyshells. Available are the Circuit stadium, Torment SC and Ruckus monster truck.

View the features and more images here

October 6, 2016

Fenix Racing 235mm gear differential kit

Fenix Racing have introduced the 235mm Pro10 variant of their popular 1/10th formula gear differential kit. Compared to a standard ball differential the gear diff will improve traction on high-bite surfaces significantly. Available in two versions, with a 77T 48 pitch and a 92T 64 pitch main gear, the diff fits most of today’s 235mm pan cars and it is shortly also available as a 1/12th scale variant.

Source: Fenix Racing [fenix-racing.com]

October 6, 2016

DMS Racing 1/10th short course truck tyre inserts

DMS 1/10th short course truck tyre inserts

X-Factory UK have introduced the new DMS 1/10th short course truck tyre inserts. Of an open cell construction and available in the colour-coded hardnesses of firm, medium and soft, the inserts were tested by national and local level drivers and they are meant to offer exceptional durability and consistency. The foam inserts come in packs of two and including a DMS Insertz decal sheet.

View the other new inserts here