Wheatland Wyoming R/C Racing Club hosted the Winter Indoor Off-Road Championship last weekend. All-round nice guy Adam Drake conducted a clinic as part of the event and he would also set the pace and was the overall TQ in both Nitro Buggy and Nitro Truck. Drake would then also lead both finals from start to finish to sweep the event.
The opening round of the Belgian FBA Formula Championship was held this past weekend at the GTM RC Club. Olivier Bultynck (Roche) would grab the pole position for the triple A-mains from Serpent driver Steve Deblaere while young Florian Joos (MD Racing) took the overall third place after the qualifiers. A clean sweep in the finals then secured Olivier the day’s win while Steve Deblaere, with two second place finishes, ended the day on the runner up spot. Two third places and a solid 2nd place had 12-years old Florian Joos completing the podium in third.
Source: MD Racing [mdracingrc.com]
The final round of the Xray Winter Series Slovenia was held at the Medeuzza track in Italy in the three classes of Touring Stock, Formula and 1/12th pan car with drivers from Slovenia, Croatia and Italy in attendance. With round four being the final race of the series the Touring Stock and Formula title were still up for grabs. The qualifiers of the Touring Stock class saw Jan Popic taking the TQ spot from Alojzij Osvald and Rok Rudl while the Formula class was lead by Matevz Homar from Andrej Grebenc and Borut Svoljsak. In the 1/12th pan car class former European Champion Jernej Vuga claimed the pole position for the finals from Nejc Mihelic and Simone Bellin.
Continue reading the report here
Following the 7075-T6 aluminium main chassis set for the Xray X12’16, Reflex Racing also introduced a specific variant for the RR12V2 as well as an alloy chassis for the Xray T4 line of touring cars. Starting with the RR12V2 alloy chassis kit, the set includes a black anodised and strategically milled chassis that ups the weight of the car by roughly 20g which in turn can be reduced by using lightweight electronics, screws and accessories. The chassis was developed to bring the centre of gravity as low as possible and it also includes a matching, thin carbon fibre rear lower pod plate.
The opening round of the Madrid regional series saw Alberto Garcia walking away with the win in the 45 minute A-main encounter. Starting from the 1 spot Alberto would take the win one lap ahead of runner up, Oscar Navarro. Javier Pombo completed the podium result another lap down while Daniel Vega and Pablo Landaburu rounded out the top 5.
Source: SWorkz [sworkz.com]
The first AARCMCC title event of the year took place this weekend in Canberra, Australia. The host club ACTMCRC made the choice to use sugar water on the track, making for awesome grip conditions. In the Touring 13.5T class Alex Illievski took the overall TQ by winning four of the six qualifying rounds. Come the finals it was clear how dominant Alex was compared to the field, as he was some 9 seconds ahead of the second place driver. The win was then wrapped up by the 2nd final and overall Alex would be sidelined on the podium by runner up, Dan Maher and third placed Ben Steiner.
Source: R1 Wurks [r1wurks.com.au]
Available soon from Reflex Racing is the RSD aluminium chassis conversion kit for the Xray X12’16 1/12th scale pan car. Cut from 7075-T6 aluminium and coming black anodised and with machined silver edge details the chassis weights roughly 80 gram so the car will be around 20 gram heavier than in stock trim but the use of lightweight electronics, screws and accessories will help to bring the car near to minimum weight again to achieve maximum performance. Include in the chassis set, that was designed to bring the car’s centre of gravity as low as possible, is also a thin lower pod plate to match the chassis’ reduced thickness. The conversion kit will become available by mid-March.
Source: Reflex Racing [reflexracing.net]
Coming from Muchmore is the Lightweight Setup Board 2 for 1/10th and 1/12th scale vehicles. Measuring 420x320x12mm the board is made from hard wood and it features easy to clean hard plastic surfaces on both sides. Coming soon are also suitable stickers to allow for personalisation of your choice.
Source: Muchmore [muchmoreracing.net]
