Red RC » Sebastian

February 19, 2016

Novak NX4 4-pole sensored brushless motor

Novak have introduced the new NX4 540-size 4-pole sensored brushless motor. Made for the use in 1/10th scale on-road and off-road vehicles the 3900kv motor offers a lot of bottom end torque thanks to its 4-pole design, making it ideal for heavy vehicles such as 2WD and 4WD trucks. The heatsink can lowers the operation temperature while ABEC 5 bearings and a Kevlar-wrapped rotor make for maximum performance and reliability. Rubber gaskets and a closed motor design help keeping dust and dirt away from the delicate internals. The motor comes pre-wired with 13AWG wire and gold-plated 4mm bullet-type connectors and it will become available soon.

Source: Novak [teamnovak.com]

February 19, 2016

Wahl & Ratheisky win at Tonisport Onroad Series

For the recent round of the German Tonisport Onroad Series drivers travelled to Berlin to compete in the three classes of Touring Modified, Touring Stock and Formula. The weekend started off with practice on Friday and Saturday as well as the opening qualifier on Saturday evening. In the Touring Modified class Tim Wahl would set the TQ while the Touring Stock and Formula class belonged to a late arriving Jan Ratheisky who only attended on Sunday due to work commitments.

Continue reading here

February 19, 2016

Avid aluminium top deck clamp

The aluminium top deck clamp, featured in Avid’s recently introduced T4’16 adjustable top deck, is now also available separately. The additional clamp allows to reinforce the rear section of the chassis which can be beneficial in certain track conditions. Included are the upper and lower clamp parts machined from aluminium and a suitable countersunk screw.

Source: Avid [avidrc.com]

February 19, 2016

Robin Frischkopf takes maiden Formula class win

The third round of the Swiss Islikon Masters was recently held and in the Formula class Robin Frischkopf managed to take the TQ after winning all qualifying rounds. The opening A-main then was a pretty easy affair for Robin but for the second leg he forgot to sauce the tyres, causing his car to being a lot slower. He also made a couple of mistakes which promoted Rainer Zimmer into the lead, but Robin managed to take back the lead in the final lap to take the win and with it his first Formula class victory. For the third and final A-main Robin decided to start dead last to make things a bit more exciting. The leg would then be a race between Andi Frattaroli (Xray) and Robin Frischkopf (Xray) and as Andi was able to defend his position by making his car very wide he took the final A-main win and also the overall runner-up spot from Rainer Zimmer (Xray) who completed the top 3 result.

Source: Xray [teamxray.com]

February 19, 2016

Batas wins at Greek Indoor Cup 2016

The Greek Indoor Cup was recently held at the RC Ring indoor track and the qualifying of the Touring Car class was dominated by the battle for TQ between Batas and Georgiadis. Ultimately Batas (Xray) would hold the upper hand over team mate Georgiadis and TOP driver Sikianakis. The three would also battle it out in the A-mains with some very close racing and again Batas would come out fastest over Georgiadis and Sikianakis. Mitropoulos (Yokomo) and Xrysomalos (Xray) would complete the top 5 result.

View the A-final result here

February 18, 2016

Novak Hammer sensored 1/10th scale controller

Available soon from Novak is the intermediate-level Hammer 1/10th scale brushless speed controller. The sensored ESC is good for the use with 2S to 3S LiPo battery packs and down to 8.5T motors, making it ideal for a range of on-road and off-road applications. The controller is factory-defaulted to LiPo mode with reverse turned on and drivers can customise the firmware to suit their driving style, including throttle curve, brake power and many other parameters. The firmware also includes thermal overload protection, low-voltage protection, and motor lock-up protection for added reliability. Additionally, on-board diagnostics are standard in the firmware including a motor sensor checking test, error sensing, and on-board temperature diagnostics. Designed with a silicone gasket sealed case, the Hammer is protected from the elements such as water, dirt, and other debris and it comes pre-wired from the factory with gold-plated bullet connectors for easy installation.

Source: Novak [teamnovak.com]

February 18, 2016

Chris Nielsen wins 17.5T class at DRCMU Rd6

Round six of the Danish DRCMU series was held in Birkerod in the outskirts of Copenhagen with about 60 racers attending, and more would have joined them, but because of limited pit space, the organisers decided not to accept late entries. In the 17.5T class Chris Nielsen set the early pace both in the free and times practice but he was chased by Bjarke Nyskov and Rasmus Skjoldborg. The qualifiers then were a done deal for Chris who won all three rounds to grab the overall TQ from Bjarke Nyskov and Henrik Hoj Rasmussen.

Continue reading here

February 18, 2016

T-Works BD7 titanium king pin screws

T-Works have introduced a set of titanium king pin screws for the Yokomo BD7-2015 and 2016 cars. Machined from the same lightweight yet rigid titanium material as T-Works’ screws and turnbuckles the parts help to scrub some unsprung weight on the front suspension for improved suspension efficiency and performance.

View another image here