Red RC » Sebastian

February 23, 2015

Jefferies & Finlay win at International Carpet Challenge

The International Carpet Challenge was held in Southend, south-east England over the weekend. Xray’s Olly Jefferies completed his domination of the 2015 ICC event by taking a clean sweep of qualifying and the triple leg finals. The British National Champion was clearly the class of the field at signature race of the well-known EWS team in the UK. Olly topped the controlled practice rounds, and then proceeded to win every one of the five qualifying rounds at the 2-day event. German star Christopher Krapp looked liked being Olly’s closest challenger, taking his Kyosho to second place in the opening three rounds of qualifying.

Click here to continue reading the report

February 23, 2015

Griffin Hanna wins Pro E-Buggy at Motorama

This past weekend the annual Motorama race was held in Harrisburg, Pennsylvania. In the Pro E-Buggy class Serpent’s Griffin Hanna took the TQ and he went on to win the main final also while coming in 2nd in the Pro E-Truggy class.

Source: Serpent [serpent.com]

February 23, 2015

EX Lab T4’15 floating steering servo holder

EX Lab T4'15 floating steering servo holder

EX Lab has released a first rendering of what appears to be a floating steering and servo holder for the Xray T4. Making use of a redesigned upper servo holder plate that takes the steering bellcrank posts the part removes the steering assembly from the lower chassis plate to minimise the influence of the twisting chassis on the steering angle during hard cornering. The chassis will also flex more with the steering posts removed from the lower plate which can be beneficial in certain conditions while an additional post allows to connect the servo holder plate with the top deck in case a stiffer front end is required. The set, that from what is understood is designed to work with the T4’s standard inner and out aluminium servo mounts, will become available in mid-March.

Source: EX Lab [excelllab.com]

February 23, 2015

Spec-R M-05/06 HD gear differential set

New from Spec-R comes a heavy duty gear differential set of the Tamiya M-05 and M-06 kits. Using a lightweight yet sturdy plastic diff housing, nylon gears and longlife differential joints the diff requires less maintenance compared to the kit part while offering improved diff action at the same time. It also will be more consistent during a run even when using higher power motors. The diff comes without the needed fluid and it is only usable with 10x15x4mm bearings.

Click here to view another photo

February 22, 2015

Carlsson & Andersson win at SSIC Rd5

Carlsson & Andersson win at South Swedish Indoor Cup Rd5

The fifth round of the South Swedish Indoor Cup was held in Hasselholm in the three classes of Touring Car Modified, Stock 17.5T Blinky and Formula. The race was held on a small and technical track and in the Modified class it was Daniel Carlsson who finished the day on top after grabbing the pole position for the finals. Christian Holmström came in 2nd while Kenneth Carlsson rounded out the podium on the 3rd spot.

Click here to continue reading

February 21, 2015

Muchmore warming LiPo safety bag

New from Muchmore comes a LiPo safety bag with built-in heating system to maintain a certain battery temperature while charging in cold ambient temperatures. Keeping the inside at a constant 30 degree Celsius the bag helps to raise the battery’s performance which can be helpful especially when racing stock classes. The heating system works in a voltage range of 7.4V to 13.8V and it is housed in a proper, fire-resistant safety bag. While a safety bag for charging and discharging duties is mandatory at many tracks you may need to check if the track’s or race series’ rules allow the battery heating devices.

Click here to view more photos

February 21, 2015

Schelle Racing Innovations B5 aluminium rear hubs

Schelle introduce a new 2-piece hub concept for the Team Associated B5 and T5 platform. The 2-piece design with a replaceable upper cab increases adjustment and durability as the upper part can be spaced away from the main hub with ballstud shims, allowing fine “in-between” adjustments for the rear upper link. True to the kit geometry, the zero degree toe aluminium hubs are of a symmetric design with shared parts left and right. Plastic bearing inserts and hinge pin set screws make for the highest possible precision and slop-free parts fitment. The upper cap design reduces leverage on the outer ballstud, as well as increasing shock clearance for the turnbuckle. The hubs come in black or blue anodising and are available now.

Click here to view more photos

February 21, 2015

Ride Rex34 Ver2 pre-glued touring car wheels

Ride introduce the Rex34 Ver2 touring car asphalt wheel. The rubber compound and orange moulded insert remain the same but the pre-glued wheels come with a redesigned disc rim that offers optimised moulding, an updated and more shock resistant material, an improved tyre fit, a reinforced hub and an improved glueing process to make for higher precision. The ver2 wheels come in sets of four and they are available now.

Source: Ride [rc-ride.co.jp]