Red RC » Sebastian

May 19, 2014

Belgian SCT Cup Rd2 – Report

The 2nd round of the Belgian SCT Cup was run in Seraing, Belgium. The track layout with its few low-speed corners, elevation changes and nice jumps made for close racing while its surface dries very fast which was a plus over the weekend too. In Pro2 the race was on between Juian Andre (Team Associated), Philippe Hautecoeur (Team Associated) and Nicolas Evens (TLR 22SCT) who each took a leg in qualifying. Philippe and Julian where also tie on points but at the end Julian took TQ with a better time. In Pro4 Thierry Matthieu (Tekno) dominated qualifying like he did in Brussels. Nicolas Evens (TLR) followed in front of Jean-Yves Konings (Team Associated).

Click here to continue reading

May 16, 2014

Xceed 1/8th & 1/10th wheel balancers

Available now from Xceed are there new wheel balancers for 1/8th off-road, 1/8th on-road and 1/10th on-road tyres. They are built around a sturdy aluminium base that can be disassembled for storage and transportation purposes. The main balancer shaft is made from spring steel and rests on ball races for super true running. Included with each balancer comes a fabric pouch to keep all parts together during storage.

Click here to view more photos

May 16, 2014

LRP introduce updated Pulsar Touch charger

LRP’s popular Pulsar Touch DC charger received a small update in the form of a new UV light resistant case, updated discharge cut-off voltage settings and an additional EHR to XHR balancer adapter. The updated case will prevent the charger from becoming unsightly due to sun bleaching while the new cut-off values will prevent LiXX batteries from becoming deep discharged. The additional balancer adapter on the other hand improves the compatibility to all commonly used LiXX packs. Otherwise the charger, whose first version was released back in 2010, remains unchanged.

Source: LRP [lrp.cc]

May 16, 2014

Muchmore on-road setup tools

Muchmore Racing’s “Perfect” line of setup tools includes three new gauges such as the ride height and droop gauge as well as a 0.2mm and 0.5mm step ride height gauge. First up is the ride height and droop gauge that offers scales for 4.5 to 7.0 droop settings and 2.5mm to 6.0mm ride height measurement. The second new tool is the 0.2mm step ride height gauge that helps to measure the chassis ride height in a range from 3.0mm up to 6.0mm in 0.2mm increments. Also available is a 0.5mm increment ride height gauge for a 2.0mm to 9.0mm measuring range. All tools are machined form aluminium, they come black anodised and with white markings.

Click here to view the other new gauges

May 16, 2014

GForce TS 50A Type-C sensored brushless ESC

Available soon from GForce is the TS 50A Type-C sensored brushless speed controller. The “non-boost” club-level speedo measures 35.3×32.4×19.7mm, and is made for the use with 2S LiPo batteries. A burst current of 300A allows to use down to 8.5T motors in on-road and 11.5T motors in off-road applications while the GForce’s optional Progbox helps to fine-tune the throttle and brake settings when needed. The speed controller come pre-wired with Tamiya-compatible battery and motor plugs and sports a dust-protected on/off switch for added security.

Click here to view the specifications

May 16, 2014

Awesomatix 4.8mm ball studs & open ball cups

Awesomatix have new optional 4.8mm ball studs and matching “open” ball cups available. The parts are designed to replace the standard upper inner pivots for the camber and caster links of the A700 touring car to make for faster suspension geometry changes – a popular modification that previously was carried out using non-Awesomatix parts. Now the respective 10mm long ball studs and open ball cups are available directly from the Russian company with the design of the parts allowing for roll centre fine-tuning without disconnecting the cups from the balls. The ball studs come in packs of four while the cups being sold as pair.

Click here to view a photo of the ball cups

May 15, 2014

JConcepts RT6 & CT4.2 MM Finnisher bodyshell

JConcepts introduce the Finnisher bodyshell for the Kyosho RT6 stadium truck in mid motor configuration. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core. A revised front hood scoop allows plenty of clearance for the unique RT6 geometry while smoothing out the front down force area. Front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight and the body has built-in air escape passages which allow the customer to fine-tune the body for maximum outdoor performance. The body includes a high performance gurney spoiler which increases rear grip and it also has the necessary geometry to fit the Centro CT4.2 conversion vehicle.

Click here to view more photos

May 15, 2014

Pro-Line LockDown 1/8th buggy tyre

Available from June is Pro-Line’s latest 1/8th off-road tyre called the LockDown. Coming in a range of compounds such as the X2 to X4 as well as the M3 and M4, the tyre makes use of a distinctive block tread with outer X-shaped pins. More information about the tyre and its applications should become available soon.

Source: Pro-Line [prolineracing.com]