Red RC » Sebastian

April 16, 2019

Scottish GT Regionals Rd4 – Report

The fourth and final round of the 2019 BRCA Scottish GT Regional’s took place last weekend at Lothian Radio Control Car Club. The club has invested heavily this year with a new carpet and track markers giving the racers the best possible race experience. A fast flowing track was laid out and with a grip line established early on a great days racing was had by all. Qualifying would see this year’s Champion John Simpson take control and he was the only person to record 35 laps. The next three cars just missed the 35 laps and were split by three tenths of a second. James Eaves claiming the 2nd place spot from Kenneth Rogers in 3rd and Andrew Edwards 4th. The battle for the final places in the A-final had been close all day with David Bruce lining up 5th and Fraser Leslie claiming the last spot with a great final qualifying run.

Continue reading the report here

April 16, 2019

JConcepts NCTS Rd2 – Report

This past weekend Northwest Hobbies in Albany, Oregon played host to round 2 of the 2019 JConcepts National Carpet and Turf Series also known as the Northwest Carpet Nationals. The 2019 NW Carpet Nationals layout was very challenging. The track flow was super fast and required a lot of low-speed steering as the angles and turns were really tight, but yet needed balance because of the full length straight and high-speed sweeper that required confident steering and stability. Getting the car setup right was the key to lap speed, but keep in mind the faster you go the harder it is to maintain consistency which led into an internal battle of pushing too hard and going too slow. In 2WD Modified Buggy it was a flawless performance by one of the industry’s brightest young stars as Team Associated’s Broc Champlin scored his 1st major victory on carpet at round 2 of the NCTS. After round 1, Broc was searching for a bit of redemption and with a dominant win in A1 and A2 here at round 2 in 2WD Modified, Broc is starting to emerge as a true competitor on the world scale. Team Yokomo’s Ryan Cavalieri finished 2nd, but is starting to gel better with his new gear and inching closer to his winning ways. AE’s Dustin Evans finally got his car to his liking on main day and found great speed and finished 3rd on the podium.

Continue reading the report here

April 16, 2019

Yokomo BD9 multi weight plate set

Coming from Yokomo and made for the BD9 touring car is a multi weight plate set. Designed to optimized left-to-right weight balance, the three brass plates can be installed in the battery compartment when using lightweight LCG battery packs and they can also be mounted in the electronics area when using heavy batteries or lightweight electronics. Each plate weighs in at 7g and measures 25x34x1mm. A set of thin double sided tape is included, ensuring minimum height gain. Designed for the BD9 the set is usable with most other electric touring car kits.

View another image here

April 15, 2019

Reds Racing ZX Pro 160A speed controller

Reds Racing from Italy have introduced their all-new ZX Pro 160A 1/10th scale brushes speed controller. The no-compromised ESC was developed with the input of Reds Racing’s international team of factory drivers and it features an updated firmware with new algorithms for throttle and brake control that result in the smoothest possible throttle and very strong brake feeling. At 95g including wires the controller is also lighter than the previous version while offering new programming functions. The speedo features a built-in power switch and programming port, it utilises a switchable 6V/7.4V BEC system as well as a 30mm fan unit. The ZX Pro is available separately, including programming box or Z-Line motors.

View a list of the specifications and another image here

April 15, 2019

Danny K wins at Malaysian National League Rd2

The second round of the Malaysian 1/8th Buggy National League was held at the Putrajaya track last weekend. The weather was very hot making the track dry, bumpy and dusty – and thus very challenging for all the drivers. In the Pro Class it was a fight among the youngsters again as Danny K (SWorkz) took the TQ position from Jade Lim (Team Associated) and Adam Fikri (JQRacing). Both Danny and Jade were able to win their respective semis to start 1st and 2nd for the grand final. The grand final was super intense due to the extreme bumpy track conditions. Many cars had issues but in the end it was Danny K who led from start to finish by a clear two laps from Jade Lim with Adam Fikri finishing in 3rd.

Source: SWorkz [sworkz.com]

April 15, 2019

Belgian Electric On-road Nationals Rd1 – Report

The opening round of the Belgian Electric On-road Nationals was held this past weekend at the Lovan indoor track in Alveringem. The club provided the racers with a challenging, quite grippy track and a large pit area for lots of fun on and off the track. The classes remained the same for 2019 with Formula using the Scorpion speed and motor combination, Stock 13.5 uses the proven Muchmore combo and the new Fun 17.5 class utilises a spec motor provided by T2M. The Modified class remained unchanged and all classes use the popular Volante tyres. The premier Touring Modified class has been Olivier Bultynck’s playing field for over ten years, claiming national title after national title. Despite carpet not being his favourite racing surface, he shattered Florian Joos’ previous lap record during Saturday’s practice. The runner up champion of the previous four years, Mitchell Van Es, just came back into racing after a long illness. He too was very strong during Saturday’s practice with his Awesomatix car. Having raced on the same layout three weeks ago, Florian Joos already found a good setup for his car and was hoping to finish on the podium.

Continue reading the report here

April 15, 2019

Darkside Designs YZ-2 & RT6 carbon shock towers

Coming from Darkside Designs are new carbon fibre shock towers for the Yokomo YZ-2 and the Kyosho RT6. Starting with the Yokomo-related shock stay, the short turf/carpet rear tower was developed for the use with YZ-2T front shock bodies and it is made of 4mm carbon fibre. Using the shock tower will lower the overall centre of gravity for quicker cornering in high-bite track conditions.

Continue reading here

April 15, 2019

Xray T4 adjustable battery holders

Xray have introduced their new fully adjustable battery holders for the T4 touring car. Their design allows to move the batteries front and aft by 4mm as well as left and right in order to fine-tune the car’s weight balance. The battery mounts do away with the need to run the battery tape under the chassis, instead it is run as a loop which prevents the chassis from becoming tweaked while also ensuring a more secure battery pack mounting and optimised chassis flex. The battery holding system is available in a lightweight carbon fibre and aluminium variant as well as a heavier brass and carbon fibre version, the latter adding 7.5g of weight which comes in handy when running lightweight battery packs.

View the brass variant here