Coming from Yeah Racing and made for Tamiya’s popular T3-01 Dancing Rider trike is a 3mm carbon fibre sway arm. The graphite flipper piece is secured with screws and will not pop out as easily as the stock part while adding a bit of visual impact to the otherwise plastic-ish vehicle. The arm is machined from 3mm carbon fibre and it is a direct fit.
T-Works have introduced a set of specially coated metal gear internals for the MP9 TKI4 and TKI3 differentials. Each set contains six gears as well as pins and shims and using the parts will reduce overall wear while offering a smoother diff action thanks to the gear’s slick surface coating. One set contains parts for one differential meaning it need three sets to equip a full kit.
Source: T-Works [rc-tworks.com]
Last weekend saw the running of round 4 of the Swiss 1/8th off-road nationals. The demanding track of Gland made racing challenging and in the end it was experienced Patrick Hofer with the TQ in the 1/8th Expert Buggy class as Fabian Widmer TQ’s the Amateur category. After the Expert class semifinals it was again Patrick who hold the upper hand and he would start from pole into the A-main. For the first 20 minutes of the main, Jean-Marc Betticher was able to stay in Patrick’s slipstream, however soon after the had to let him go meaning Patrick would be able to score a comfortable 30+ seconds win from JMB 2nd and Valentin Bader 3rd.
Continue reading the report here
The Meiningen track in Germany played host to the 2018 German 1/8th Truggy championships this past weekend. Practice started on Friday and it became instantly clear that the race would be a tough one as the gruelling track was in a hard-packed and rutted condition. Right from the get go the Kilic brothers showed an impressive speed and the two would also obtain the front row of the grid going into the 40-minute A-main event. In the end the two would also make up the top steps of the podium with Burak taking the 2018 Nitro Truggy championship title from Berkan with the vice-championship title. In 3rd, Johannes Klett would round out the podium.
Thanks to Abdullah Kilic for the report.
This past weekend the MRCL Langenthal invited to the third round of Swiss IC Track Championships. The resurfaced track was completed only three weeks ago and the club took the opportunity to celebrate its reopening. In addition to a perfectly organised race, there was also a supporting program with BBQ, fireworks, public-viewing, music and cold drinks. In the 1/8th class the pole position went to Silvio Hächler after a close fight. In the Superpole race, Simon repeated his masterpiece from last weekend, setting the new best time in the very first lap and thus secured his direct starting position in the final. After Silvio had a bad start into the main race, Simon was able to take over the lead before the first corner which he was able to extend to a gap of three seconds. Unfortunately Silvio had to retire the race in the 52nd lap due to an engine failure. Simon Kurzbuch (Shepherd), now without pressure, finished the race confidently and won the 3rd round of the Swiss Championship ahead of the Xray duo of Mattia Pesenti and Luca Martinelli, who crossed the finish line only four seconds apart.
Source: Shepherd [team-shepherd.com]
The Kamloops Summer Classic, round 3 of the Western Offroad Racing Series WORS was held at Thompson Valley RC Race Club who put together a brand new layout for the event, and attracted racers from all over Western Canada. WORS is a 5-round series traveling through British Columbia with the main 1/10th scale classes as well as Nitro and Electric 1/8th scale. Kamloops being a central locale, also draws many drivers from Alberta in a true Province vs Province show down. Local, Jason Mardon, had double duty both as racer and main race director for the event. Concentrating mainly on the 1/10th scale classes, Mardon managed TQ in both 2WD Buggy Open and 2WD Truck Open, P3 in 4WD Buggy Open and P6 in eBuggy.
Continue reading the report here
1/12 Japan National champion Yugo Nagashima, has joined the Power HD team. The 2018 Snowbirds Touring Modified Champion, 2018 1/12th Modified and Touring Modified Champion will be using Power HD’s competition spec servos at all major events and he has the following to say:
I would like to thanks Power HD to give me chance to race with Power HD servo. I had tried Power HD servo and I am really happy about the performance and quality.
Source: Power HD [chd.hk]
Specially designed for the Mugen MTC1 touring car is ArndtCraft’s new Extreme Cool fan shroud. The part is a direct fit to the MTC1 and it accepts most standard 30mm fans units. The 3-D-printed part will significantly reduce the operation temperatures of both modified and stock motors, it comes without the required hardware and it is available now.
