T-Works have introduced new aluminium wheel hubs for Kyosho’s MP9 TKI4 and TKI3 buggies. Available is a 4-piece set of standard offset hubs as well as a 2-piece set of +1mm offset hubs with the latter increasing the vehicle’s track width for improved stability. All parts are machined from high-quality 7075-T6 aluminium, they come black anodised for wear and with laser-etched markings for easy identification.
Coming from Hudy are two new clamping design throttle servo arms. They are cut from high-quality aluminium and are available in a standard or off-set design, the latter being necessary for some nitro vehicles. The ultra-durable design with dual M3 threads allows for secure throttle and brake linkage mounting and the arm’s clamping design ensures it stays in place even after the main mounting screw became loose. In addition the standard arm is also available with plain, non-threaded linkage mounting holes. The arms come black anodised and laser etched and they are available in 23T, 24T and 25T specification.
View the offset servo arm here
Coming from Xray are their new Aerodisk V2 1/10th buggy rear wheels. The rims offer an updated design with the centere countersunk area being redesigned to place the wheel nut deeper. They are made from flexible, durable material to withstand impacts and inner reinforcement ribs to make the wheels as stable as possible to eliminate deformation while still offering a low weight. The white colour wheels are available as pairs or 10-piece multi packs.
Source: Xray [teamxray.com]
The Spring Indoor Nationals is always a special time in the Pacific Northwest as the highly anticipated race brings out the best and fastest local racers along with some of the nation’s top drivers to battle it out on a premier, high-bite indoor clay track better known as the legendary Tacoma R/C Raceway in Tacoma, Washington. This year, the layout was extremely fun featuring a radius increasing, full speed sweeper with technical jumps and rhythm sections galore. Because of the tight space, everything is even more connected putting a major emphasis on flow and rhythm while trying to maintain maximum corner speed. As the track changes and the grip increases throughout the weekend, timely setup changes will result in a faster pace and potentially increase your grid position. three rounds of qualifying are held taking best two of three to sort for mains with bump-ups to make a tightly packed 11-car field. 2WD Modified and 4WD Modified raced 6-minute triple A’s while the rest of the classes got single 8-minutes mains.
Continue reading the report here
Mugen have released first images and information on their new MRX6R 1/8th scale nitro on-road kit. The evolution of the successful MBX6 will offer greater durability, more traction and improved mid-corner steering and it builds on a redesigned aluminium chassis with an additional carbon fibre tray to fit balance weights underneath the tank area. The chassis was used at the 2017 World Championship in France where it has proven its performance with a podium finish. Also new is the multi-bearing clutch system whose design improves bearing life while the optimised clutch bell surface treatment, in combination with a new clutch shoe material, enhances durability and acceleration. In the rear the kit utilises new longer lower suspension arms for improved traction and drivability while up front a redesigned radio tray improves mid-corner steering thanks to a new shape and the ability to fine-tune the flex characteristics. Another new part is the updated front bumper that offers increased body shell durability and better ground clearance and last but not least comes a floating battery mount that utilises rubber grommets for less influence in natural chassis flex. No word yet on the kit’s release date but it is expected to hit shops soon.
The opening round of the Spanish 1/8th GT National Championship was held at the ARCA track in Madrid in the three classes of GT, GTE and Super GT. In the GT category it was Gustavo Gines with the overall TQ after the four qualifying rounds with Miguel Acosta and Jorge Revert coming in 2nd and 3rd respectively. In the 45-minute main final however it was Toni Santana with the win some 13 seconds in front of runner-up, Jorge as Miguel rounded out the podium results in 3rd.
Source: Reds Racing [reds-racing.com]
Japanese brand Zero Tribe have announced the soon release of new aluminium and carbon fibre option parts for the Xray T4 2018 and 2017 kits. First up is an upper aluminium floating servo mount plate that was designed to replace the standard carbon fibre item. Available in orange or black anodising the plate offers greater stiffness compared to the standard item for improved initial steering response and it is usable on both the current 2018 and older 2017 specification kit.
The recent 2018 IFMAR 1/8th Gas Buggy World Championship warm-up race held at the MORB club in Perth, Australia was also the second round of the Australian 1/8th off-road national championship. In the Sportsman class it was Christian Wolhuter with the win from Bradley Thaggard in 2nd and Darren Johnston 3rd.
