Red RC » Bittydesign

September 3, 2018

Bittydesign LS3 GT12 bodyshell

Fresh from Bittydesign comes a brand new bodyshell for the 1/12 scale GT12 category called the LS3. Featuring an instantly recognisable look, based on a famous car manufacturer, it has been tested for several months with performance to match the realistic aesthetic. The design has been adapted to meet the specs of the GT12 class, the front splitter as well the side skirts have been moved many times to find the perfect height and compromise between air efficiency and realism. Tests on different tracks demonstrate very fast corner entry that remains stable through the steering range while the rear end is very stable thanks to the big wing that make the model particularly easy to drive. Universal, it fit all the 1/12 GT12 chassis on the market, but can also fit a 1/12 pan-car chassis. Produced in a lightweight version, with a thickness of 0,75mm, the body comes with a complete set of screws, nuts and large plastic washers to fix the rear wing as well as a decal sheet and windows mask.

View another image of the LS3 here

August 9, 2018

Bittydesign Hard 190mm touring car rear wings

Coming from Bittydesign are their new Hard series touring car wings for 190mm bodies and Modified or Stock racing classes. The wings are available with specific aerodynamic profiles and reinforcements, making them experts for the respective application. The Modified variant will create greater downforce while the Stock wing will lower the airflow for more fluent cornering. Both sport double cutting lines at 18mm and 20mm to fine-tune aerodynamic load while pre-marked and removable centre sections help to reduce aerodynamic drag when needed. The wings are available separately and fit Bittydesign’s own 190mm touring car bodies as well as many other brands.

View more images here

July 31, 2018

Bittydesign JP8 Ultra Lite Weight touring car body

Bittydesign’s popular JP8 190mm touring car body shell is now also available in an Ultra Lite Weight variant. Designed for carpet and asphalt racing alike the body is moulded using a special process that results in greatly reduced mass with an overall weight of about 68g to 71g being achievable depending on paint, stickers and rear wing. The result is less body roll, better rotation while maintaining an easy to drive feeling and also increased corner speed. The body is moulded from high-quality Lexan polycarbonate material and it comes including overspray film, window masks and pre-cut decal sheets.

View more images here

May 15, 2018

Bittydesign 1/10th on-road car stand

Bittydesign have introduced their new 1/10th on-road car stand for touring and formula cars. Moulded form high-quality 1mm thick polycarbonate the car stand comes clear and can be customised in many ways. Included is a pair of black anti-slip foam pads and while coming in handy to place the car on top during building, setup and maintenance the stand also incorporates a small parts tray and holes to hold the car’s shock absorbers while filling them with shock fluid.

View more images here

May 3, 2018

New Bittydesign table pad

Bittydesign have introduced their all-new table pad. Measuring 100x63cm the pit mat is made of high-quality fabric with an anti-slip backside padding and colourful Bittydesign graphics on the front. The pad helps to keep pit tables clean while making for a comfortable place to build, setup and maintain your favourite RC car.

View more images here

April 26, 2018

Bittydesign 1/10th off-road car stand

Bittydesign from Italy have introduced their new 1/10th off-road car stand. It is constructed from genuine 1mm Lexan polycarbonate and comes clear and un-cut and including a pair of anti-slip black foam pads. It incorporates four holes to hold shock absorbers during building, setup and maintenance and the shock stand is available now.

View another image here

April 23, 2018

Bittydesign 2018 Company & Factory T-shirts

Italian company Bittydesign have introduced their new 2018 T-shirts that come in the “Factory” and “Company” designs. All use high-quality cotton material and are precisely printed for high-class appearance. All shirts are available in S to XXL sizes with the Factory design coming in black and heater grey as the Company shirt is available in black exclusively.

View the other shirts here

March 16, 2018

Bittydesign JP8 190mm high downforce TC body shell

Italian company Bittydesign have introduced their all-new JP8 high downforce body shell for 190mm touring cars. The lid offers a modern, aggressive styling with a long, flowing front end for increased downforce and steering response while the rear end sports two fins that span from the rear window over to the rear wing, ensuring improved stability at high speeds while still granting lots of rotation going into corners. The EFRA, ROAR and IFMAR homologated body was developed for both asphalt and carpet tracks and it is usable for Modified and Stock racing alike. A special moulding process ensures an excellent weight to durability ratio and the body comes clear, including window masks, decal sheets and lightweight wing mounting hardware. For now the body is available in an un-cut lightweight version.

View more images here