May 26, 2012

Bittydesign Liquid Mask

Bittydesign, famous for their quality painted bodies, have released their own Liquid Mask. Developed over the past year by the Italian company on thousands of their own bodies, it was until now a really hard type of product to find in Europe. This Liquid Mask is water based, non toxic and can be easily used by anyone. Bittydesign have produced a video explaining the product and how best to use it, which can be seen below.

View the introduction video here


May 10, 2012

Bittydesign 2012 Striker-SR bodies

Bittydesign has updated their Striker-SR 1/10th scale bodies to 2012 spec. Developed with Italian top drivers including Francesco Tironi, in preparation for the Worlds in Thailand, they worked to obtain the best steering efficiency together with the highest rear stability. A completely redesigned rear wing gives the body a better general balance providing better feeling for the driver. The body is available for 1/10th 200mm gas as well as a version for 190mm EP TC on asphalt, and both versions come in lightweight 0.75mm thick polycarbonate.

View more body images here


April 26, 2012

Bittydesign A8 Force body & mudguards

Bittydesign introduce the Force body for Agama’s A8 buggy. Designed in cooperation with Italian Agama drivers Riccardo Perin and Stefano Cantoni the body produces improved front end grip in both low and high speed corners while maximising rear downforce due to the redesigned side pods. The roof section sports a small fin to add engine protection. Made from 1.0mm Lexan material the body comes clear with outer protective film, window masks and decal sheet. Also available are suitable rear mudguards. They are made from clear 1.0mm Lexan and protect the wishbones, driveshafts and shock absorbers from becoming excessively dirty in muddy racing conditions.

Click here to view the mudguards


March 5, 2012

Bitty Design 8.2 Force body shell

Bitty Design have released their 8.2 Force body shell for the Associated RC8.2. Different from their other cab forward they focussed on making a good looking shell that fits the chassis well and makes the car easy to drive. Their tests revealed a balanced body which give better feeling while driving, the lap times are not better but the handling was more consistent in long runs. The body is sold complete with windows masks, decal and protective film and has been produced with high quality 1mm Lexan.

View more images of the shell here


December 22, 2011

Bittydesign Force body for Serpent Cobra

Bittydesign Force body for Serpent Cobra

Bittydesign have tackled the Serpent Cobra, giving it the Force treatment with the release of this dedicated body shell. Featuring a cab forward design, it has been developed to obtain better downforce and improve steering response in low speed turns while the sidepods help obtain higher downforce at the rear of the body in high speed turns. Engine airflow has also been improved with the body helping the engine run cooler by about 5-10°C compared to the stock body. Body is 1mm thick, comes with overspray film, window masks and a set of decals.

Source: Bittydesign [bittydesign.net]


December 12, 2011

Bittydesign Force shell for THE Car

Bittydesign Force shell for THE Car

As seen during our race coverage at last Octobers Arena race in Italy, Bittydesign have released their Force shell for the JQ Products THE Car. Featuring a cab forward design, it has been developed to obtain better downforce and improve steering response in low speed turns. They also worked to obtain higher downforce at the rear of the body by adding winglets which also helps create more stability in high speed turns. The cab has been developed to use the original JQ air filter, regardless of whether the engine is placed in the front or rear position. Also available to complete the look, rear mud guards which are supplied clear so they can be painted to match your shell.

View more images of the shell here


November 9, 2011

Bittydesign Force body for Xray XB808

Bittydesign Force body for Xray XB808

Bittydesign have introduced their new Force body and mud guards for the Xray XB808 2011. The new shell follows the same lines as the previously available Force bodies with the extreme cab forward treatment for improved handling and to improve cooling to the engine. This shell also features 2 additional big air scoops on the side for improved downforce with additional room under the cab for the air filter. Made in Italy using high quality lexan, the shell is sold with decal sheets, window mask and protective film, all at a very good price. The mud guards, which are mounted on the front face of the rear wishbones are also made from genuine lexan polycarbonate. Both products are available now through the Bittydesign website or in 2 weeks through their distributor network.

View more images here


September 13, 2011

Bittydesign MBX-6 Force shell

Bittydesign MBX-6 Force shell

Bittydesign have announced that their MBX-6 Force shell is now available. The body that won the European Championships mounted to the car of Robert Batlle, the cab forward body adds “more feeling and more steering” according to the 2-time champion. The body which is made from 1mm thick, high quality, genuine Lexan is sold with windows masks, protective film, and decal sheets. Available now online from Bitty direct, it will hit dealers in about 2 weeks.

View more images of the shell here


Mibosport
TargetRC
VP Racing
T-Works