Red RC » Bittydesign

April 28, 2024

Bittydesign P-GT3R 1:10 GT 190mm body

Continuing to expand their range of bodies for the GT class, Italian company Bittydesign has released the all new P-GT3R body shell made for 1:10 190mm electric touring car platforms. The body shell is universal and mounts on all 1:10 190mm models, the wing complies with the measures as per USGT regulation (10mm height) and can therefore be used at any race. The shapes inspired by a GT3 racing car have been adapted to the proportions and measures necessary for use with the 190mm electric models; the design phase took several months to finish every single particular, the attention to detail was obsessive in order to propose a body that could optimise aerodynamics and at the same time remain real in its proportions and aesthetics. Included in the kit are a complete set of screw, nuts and large plastic washers to fix properly the rear wing, the front nose flaps (mounted with double side tape) and a decal sheet pre-cut and windows mask.

View more images here

March 18, 2024

Bittydesign ‘Ekanus’ 1:10 No Prep Drag Racing body

New from Bittydesign is the Ekanus 1:10 Drag racing body that is available in two options. The body shell was designed on Team Associated DR10 chassis but can also be mounted on Losi 22S chassis No Prep Drag, Traxxas Slash 2wd Drag Car & Traxxas Drag Slash 1:10. The single body designed in such a way that it can be used both in ‘No Prep Street Street’ configuration with GT-style wing and also in a more extreme version with maxi rear wing for the ‘No Prep Street Outlaw’ category. The body is made with 1mm thick genuine polycarbonate Lexan and includes the upper rear wing to give the bodywork aesthetic realism and increased aerodynamic load along with the Front splitter for an even more aggressive racing look and greater steering directionality. For the No Prep Outlaw’ version you can buy an optional huge wing specifically designed and engineered to transform the body from a ‘Street’ to an ‘Outlaw’ category in which aerodynamics can be extreme to maximise the performance.

View more images here

December 9, 2023

Bittydesign Mini-Z 1:28 bodies

Bittydesign has announced three new bodies designed to offer Mini-Z enthusiasts a wider choice according to their preferred style: Supercar, Touring and FWD. The Italian manufacturer has scaled down their three best-performing 1:10 bodies by adapting the proportions in order to allow perfect installation on 1:28 scale chassis. The three body styles meet every need: for maximum performance the ARES-1 is the best choice, for a touring there is the Eptron and for a real front-wheel-drive race car look with enlarged ‘TCR’ style wider fenders there is the CA45. Made with high quality 0.8mm polycarbonate, the bodies are universal and fit all 1:28 scale chassis with 98mm wheelbase. Sold clear with protective film outside and a pre-cut decal sheet and window masks, the kit includes a set of screw/nuts/washers to fix the rear wing.

View individual bodies here

November 6, 2023

Bittydesign ARES-1 bodies

Bittydesign has announced a unique project with its ARES-1 bodyshell with the Italian company releasing the new body for 3 categories at same time. The Hypercar design ARES-1 has been creates for the 1:7 Armma, 1:10 GT and 1:12 GT. The ARES-1 for ARRMA was born out of the desire to create an extraordinary product developed specifically for Arrma, with the main aim of designing aerodynamics for top speed. Designed with the desire to create an unconventional body thanks to highly refined and extreme aerodynamics; to achieve maximum performance, we tested the body several times and made radical changes to the original design, we wanted to make sure we could offer an absolute performance product that would become the new benchmark for the GT category. 1:10 body shell is universal and mounts on all 190mm models, the wing complies with the measures as per USGT regulation and can therefore be used at any race. 1:12 body is compatible with SupaStox and SupaStox GT plus any other 1:12 scale model in the GT12 category.

View more images here

October 21, 2023

Bittydesign P10R 1:10 Rally body shell

New from Italian body shell manufacturer Bittydesign is the P10R 1:10 Rally body. Universal, it mounts on all 1:10 190mm models, both touring car chassis as well the ones created specifically for the rally category and is compatible with Tamiya TT-02 chassis in all its variants. Made with high quality and genuine polycarbonate 0.75mm Lexan it comes with a complete set of screw, nuts and large plastic washers to fix properly the rear big wing and is sold clear with protective film outside and a pre-cut decal sheet and windows masks. Resembling the Ford Puma WRC, the design phase took several months to refine every detail, the attention to detail was obsessive in order to propose a body that could best optimise aerodynamics and at the same time remain real in proportions and aesthetics.

View more images here

July 29, 2023

Bittydesign ZL-21N body for Arrma Infraction V2

New from Bittydesign for the Arrma Infraction V2 1:7 Onroad chassis is the ZL-21N body shell. Making reference to world’s most famous oval Championship, they took inspiration to design the lines of the ZL-21N body adapted to the production needs, the phase of refinement took several months to optimise every detail. The body gives your Infraction a true race car look and made from 1.5mm thick high quality and genuine polycarbonate Lexan, it is also compatible with the Traxxas XO-1 and Hobao Extreme VTE2 chassis.

View more images here

June 26, 2023

Bittydesign AR8-GT3 SWB 325mm 1:8 GT body

Italian body manufacturer Bittydesign has launched their third 1:8 GT bodyshell with the presentation of the all new AR8-GT3 SWB 325mm model. Making reference to the Audi GT3 supercar, they took inspiration to design the lines of the AR8-GT3 body shell adapted to the production needs. The latest body has a lowered front nose that generates excellent steering while the lowered cab and pronounced roof pillars stabilise the air flows that conveyed into the large rear wing that make the model easy to drive.

View more images

April 29, 2023

Bittydesign ‘A45M’ 1:10 M-chassis body shell

Bittydesign has released a new M-Chassis version of their A45 1:10 FWD body, the A45M. Inspired by the shapes of a real car, they have created enlarged TCR-style fenders by adapting the proportions and measurements necessary for use with the most common M-chassis models on the market. The body is universal and fits all the 1:10 M-chassis cars on the market with 210-225mm wheelbase. It can be mounted on the 4WD chassis as well as on front wheel drive cars. Made with high quality and genuine polycarbonate Lexan, it is produced only in Light Weight version 0,75mm thickness. The kit comes complete with screw, nuts and large plastic washers to fix properly the rear wing along with a pre-cut decal sheet and window masks.

View more images here