Red RC » Creation Model

January 3, 2019

Infinity IF18 optional universal swing shafts

To kick off the 2019 season, a World Championship year for 1/8th Nitro on-road, reigning champions Infinity have released new optional universal swing shafts for their IF18. The new front and rear shafts have had the 3×11.8mm pin position moved 90 degrees allowing for a more free drive transmission at high RPM and smoother suspension movement under high load. In the front, use of the optional shaft gives an increased steering feel while in the rear use of the new shaft increases traction and stability.

View the rear swing shafts here

December 25, 2018

Infinity IF18 hard suspension parts

In preparation for the 2019 season, Infinity has released a selection of new “hard” suspension parts for its World Championship winning IF18. Made from harder material than the standard kit parts, drivers can avail of front & rear suspension arms and a front suspension holder in the new material. The new parts greatly reduce flex which in the front arm gives the benefit of increased response at high speed and improved consistency in high grip and high temperature conditions. The harder rear arm brings an increase in rear traction along with also improving consistency in high grip and high temperature conditions. Creating the same reduced flex and improved consistency, the front suspension holder also offers an extra set-up option between the standard mount and the optional Aluminium Version providing a slightly milder feeling then that of the aluminium option.

View the other new parts here

December 20, 2018

Infinity IF18 wide roll bar

Infinity has released a new wide roll bar for their 1/8th scale Onroad World Championship winning IF18. Wider at the top section of the roll bar compared to the previous version, it has been designed to offer further stability when holding the car and in particular during refuelling.

View another image here

December 18, 2018

Infinity Team T-shirt USA edition

Infinity has released a USA edition Team T-shirt to celebrate its most recent World Championship title. The t-shirt was designed for this year’s 1:10 200mm World Championships held in Miami in October and was worn by the team during their successful title winning campaign at Homestead R/C Raceway. Featuring the USA colours both front and rear, the t-shirt is available in M through 3XL sizes.

View the back print here

December 14, 2018

Infinity pick & hook tool set

Infinity has added a pick and hook tool set to their expanding accessories line-up. The 4-piece multi purpose pick and hook tips can be used for a variety of applications during car preparation and maintenance.

Source: Creation Model [creationmodel.net]

December 12, 2018

Infinity high speed fuel stick

With quick and precise refuelling key to success in nitro racing, World Champions Infinity have released a high speed fuel stick to assist mechanics with making ultra quick fuel stops for their drivers. The wide cylinder body offers a strong grip during refuelling with the fuel released by the operation of a carbon trigger. The fuel stick features a guard to prevent accidental operation.

Source: Creation Model [creationmodel.net]

December 1, 2018

Infinity IF15 front shock tower Ver.B

Reigning 1/8th and 1/10th Nitro Onroad World Champion manufacturer Infinity has released a new optional front shock tower for its 200mm Nitro Touring WC title winning IF15. The Version B tower allows the shocks to be set in a lower lay down position to that of the standard kit version. A 2mm collar is included with the new tower to prevent the shock from touching the bulkhead.

Source: Creation Model [creationmodel.net]

November 30, 2018

7075.it LCG System touring car chassis & weight sets

Coming from 7075.it are four aluminium chassis and combo sets for touring cars such as the Awesomatix A800, Infinity IF14, Team Associated TC7.2 and Xray T4’19. All chassis are machined from high-quality 7075 aluminium and they feature a flex design for optimised torsional flex while pockets along the centre line allow the mounting of dedicated brass centre weights in order to fine-tune overall weight and weight bias. The low-profile weights protrude from the chassis by only 3mm, compared to the previous 6mm, ensuring a lower overall centre of gravity and thus faster cornering in high-grip track conditions. Weights available for now include 8g front weights, a 25g low-profile centre weight and a tall 50g centre variant. The keyed weights are mounted using a single screw and are easy to add and remove, with the A800 chassis also allowing to use the 8g front weights as additional centre variants. The chassis come black anodised for wear and looks and they are available separately or including a brass weight set.

View more images here