Red RC » CSO

August 23, 2013

CSO One driveshafts & 1.7mm V2 upper deck

CSO introduce new option parts for the CSO One touring car in the form of double joint driveshafts and a 1.7mm V2 upper deck. Starting with the driveshafts, they are made from hardcoated steel and the design reduces the wheel chatter at high steering angles often associated with single joint shafts. Designed for the use with protective blades the 46mm driveshafts not only fit the company’s own touring car but also the Xray T3 and T4. The second new part is the V2 upper deck. It is cut from 1.7mm carbon fibre, incorporates mounting positions for addition chassis braces and fits both the CSO One and the Xray T4 alike.

Click here to view the other new part

August 12, 2013

CSO One flexible lower chassis & spool

New from CSO comes two option parts for the CSO One and Xray T4 touring car in the form of a flexible lower deck and an all-alloy spool axle kit. Starting with the main chassis plate, the part is CNC-machined from 2.25mm carbon fibre and designed to fit the CSO One and the Xray T4 touring car. Large milled out sections and the waisted design make for a more flexible chassis ideal for both low and high-bite conditions in order to gain more rear traction out of the corner and to overcome traction rolling issues when turning in. The second new part is the all-aluminium hardcoated front spool set for CSO One, Xray T3/4 and the E4RS2 line of Team Magic cars. Sporting a machined aluminium 38T pulley, spool body and outdrives the axle has to be used with CSO’s optional plastic caps for the driveshafts and makes for a more solid drivetrain when needed.

Click here to view the spool

July 15, 2013

CSO One 5.5mm wheel hex adapters

CSO introduce these aluminium wheel adapters for their One 1/10th electric touring car kit. The parts are CNC-machined from 6061-T6 aluminium and come dark anodised to match the remainder of the cars’s parts. They are of a 5.5mm off-set design and incorporate a grub screw hole to secure them to the wheel shaft for a tight fit even with the wheels removed.

Source: CSO [cso.com.hk]

May 28, 2013

CSO-One Super-EX chassis plate

CSO introduce a new optional chassis plate for the CSO-One touring car kit. The main chassis is cut from 2.2mm carbon fibre material and sports additional machining compared to the kit chassis in order to allow for more torsional flex and quicker steering response while maintaining excellent stability at the same time. The car will also have a wider sweet spot and temperature window.

Click here for a chassis comparison picture

April 4, 2013

CSO aluminium lightweight layshaft clamp

CSO introduce this aluminium lightweight layshaft clamp for the use with the CSO-1 and Xray T4 cars. The part is designed to hold the layshaft bearing so there is no need to run the respective top deck screws giving for more chassis flex and therefore faster cornering. The parts come as pair and are simply secured to the layshaft holder using two screws.

Click here to view another photo

October 21, 2012

CSO BD7 front & rear upper bulkhead

CSO have released a front & rear upper bulkhead for the new Yokomo BD7 EP touring car. Made from high quality 7075 T6 aluminium, it’s harder than the original version and also has an additional upper camber link hole to give you the extra option for fine tuning if required.

Source: CSO [cso.com.hk]

May 19, 2012

CSO T3 2012 servo mount

CSO have produced this new aluminium servo mount for the Xray T3 2012 touring car. Suitable for CSO’s aftermarket T3 chassis, the servo mount is attached only to the centre of the chassis so the servo and the outer edge of the mount don’t touch, and aren’t connected, to the chassis allowing the chassis to flex more evenly without restriction.

Source: CSO [cso.com.hk]

November 13, 2011

CSO MTX5 aluminium options

CSO continue to churn out new items for the Mugen MTX5 with the release of three new optional parts for the car. First up is this aluminium steering servo saver set which comes in three pieces and like the other parts offers increased durability and that option look. The other two parts are aluminium radio plate support mounts and a hard coated steering servo saver post.

View the other new parts here