Amped Up RC, the cable brand of Donathen RC, has added fully protected 1s and 4s Balance Charge leads to its range. The leads use DRC solid design bullet connectors and genuine Amass connectors. Made with dual wall adhesive heat shrink that is molded to connectors, this reduces strain, and makes it easier to remove from batteries/chargers. 24″ Long and made with 10 awg wire they are finished with all black sheathing and heat shrink.
New from RC wiring and cables specialists Donathen RC is their newest version of external dischargers, the Discharge Box. Made for the Icharger’s in the drop down menu it is capable of discharging up to 40 amps for 1s or 2s batteries. The new discharge box means, no more burning pit mats, hands, or having useless space in your pit and it doubles as a charger, power supply, and lipo stand with optional stand. Featuring 18″ 12 awg power wire, and 18″ fan wires, the stand has space behind the stand to neatly run wires. The fans are powered by a separate 12v source, such as your DRC power supply and DRC’s 4mm bullets or genuine Amass connectors are used, ensuring quality connection over time. Made with dual wall adhesive heat shrink, this heat shrink molds to the connector, and allows for easier disconnecting.
New from WMH Racing is its V2 540 and 550 rotor masters which are designed to measure the strength (gauss) of your rotor. Measuring the strength of your rotor is important for a number of reasons as the rotor strength changes, so does the performance of the motor. By being able to measure the strength of the rotor you can measure the change and determine when it’s time for a new rotor. New rotors often bring back better performance into used motors. Testing different rotor combinations in your motor by measuring the rotor strength you can determine the difference between 2 otherwise identical rotors. Have a weaker or stronger rotor plays a huge role in the timing and gearing used for that motor. Gearing/timing/rotor strength can be optimised for your track, giving you the performance advantage. You can also compare your power package to your friend-enemies. If you know your friend has the same motor and is much slower/faster with the same gearing/timing, there is likely a difference in rotor strength. By measuring the rotor strength you can determine the reasons why you are slower/faster.
View Features & Specs plus carry case here
New from Donathen RC are these two 1:10 cars stands with one for offroad racers and a lower version for onroad use. The offroad car stand will hold a variety of vehicles like: buggies, stadium trucks, and other 1:10 scale vehicles. Featuring a hexagonal pattern that will hole shocks and diffs while rebuilding them. It also has rubber feat to prevent the stand from moving while on a flat surface, and foam strips on top keep the car in place. The onroad car stand can hold 1:10 scale cars like touring, F1, and WGT cars as well as 1:12 scale cars. It featuring the same rubber feet and foam strips as the offroad stand with both available in a choice of colours.
Donathen RC has announced the addition of another two WMH Racing products, the 550 (4 pole) Load Master and 550(4pole) Analyzer Test Holder. The 550 Load Master is a device to be used with a motor analyzer to measure how your motor would work in real world conditions (like when it’s on the track). The 550 Analyzer Test Holder is designed to hold your 550 brushless motor, instead of using the alligator clips that come with the units. Features & specs for the Load Master are that it plugs into any motor analyzer and has colour coded wires to identify A, B and C poles, With vented sides it is supplied complete with 9″ motor wires and 275mm sensor wire as well as a Resistor bank and coupler. Made in the USA, the Load Master is supplied in a protective carry case.
View Analyzer Test Holder here
Donathen RC has announced the addition of Titanium Battery Grips to its product line up. They are ideal for adding a “handle” to your 5mm bullet connectors to pull them out easier, reducing strain on the wire (preventing frays and ripped silicone), all while adding some bling to your ride! Weighing just 1.4 grams each, they are extremely light and come in unique colours options. Fitting over 10, 12, 13, 14 awg wire, they are secured with provided titanium set screw. Unique 1.5U gold plating means low resistance and longevity which is nearly 3x thicker than industry standard connectors.
Source: Donathen RC [drcproshop.com]
Donathen RC has announced the latest WMH Racing product to be added to the range, their base for motor tuning devices. This base is designed to be used with either the Load Master or Motor Test Stand and the Tunalyzer, Motolyser, or motor analyzer. When using the base it allows a great viewing angle of the motor tuning device, placement of your motor holding device, and even a parts tray for your test parts. A compact and robust design for traveling, it is available in 17 colours and has a handy parts tray for rotors, screws, shims etc.
Donathen RC has announced the addition of another WMH Racing product, the Motor Assembly Stand with Rotor Tool. With the launch of WMH Racing and many motor tuning products it became clear that some sort of product was needed to hold all of the motor parts, while tuning/working on your motor. The stand holds any 540 brushless motor with a choice of colours for stand and rotor tool. It is designed to hold: stator, screws, sensor board, end caps, rotor, and rotor shims. The Rotor Tool features gnarls to easily manoeuvre your rotor in place.
