Made for the TLR 22 4.0 buggies raced in 17.5T stock classes is Exotek’s new titanium hinge pin set. The precision-machined lightweight titanium hinge pins weigh in at only 11g which is almost half the weight of the stock pins, scrubbing a good amount of unsprung mass while reducing the buggy’s overall weight. The set includes hinge pins for the front and rear inner and outer arm locations and it is recommended for 17.5T spec buggies only.
Coming from Exotek are a new tweak board for 1/10th on-road cars as well as a pair of carbon fibre LiPo tabs for on-road and off-road kits. Starting with the tweak board, it is a quick and easy way to reset chassis flatness and tweak without having to remove the tyres. It fits the full length of 1/10th touring and formula cars to fully lift the car enough so that owners can reset the top plate flatness without removing any tyres thus saving lots of pit work time. The board is made in the USA of black melamine board, it is light of weight and measures 300x90x12mm.
Exotek have introduced two new aluminium option parts for the Team Associated RC10F6 formula car in the form of a HD steering crank and a HD front arm base. The heavy duty steering crank is a long style variant for smooth steering response that has three built-in settings to adjust the steering geometry. The crank is machined from 7075 alloy, polished and comes with machined bearing seats and in blue anodising. Also new is the heavy duty front arm mounting base for the Team Associated F6. The 1-piece design replaces the three thin front chassis posts, ensuring extra protection from tweaked suspension parts while also securing the chassis from impacts. The item comes machined from 7075 alloy and it features a polished and blue anodised finish.
Coming from Exotek and made for TLR’s 22 and 22-4 range of 1/10th scale buggies are several new option parts. First up is an ultra lightweight LiPo tab and post for the 22-4 wheeler. Usable for the 22-4 2.0 and 1.0 buggies, the carbon fibre tab holds normal height shorty packs securely but thanks to the simple design only weights 2.8g including the hardware. To remove the battery simply loosen the supplied screw and turn the carbon tab 180 degrees. Included in the set are also an alloy post, spacers and an M3 screw and to utilise low-profile shorty packs the spacer and screw can be replaced with self-sourced, shorter pieces. Due to the design, mounting of the body with hook and loop straps is required.
Coming from Exotek are new carbon fibre LiPo tabs and cups battery mounts for the Team Associated B6.1 and Xray XB2 series of vehicles. Both were specifically designed to allow quickly adjustable weight tuning while providing more natural chassis flex due to the “floating” battery mount with only two tabs touching the battery instead of a whole brace spanning from side to side. The sets are made of carbon fibre, the AE set scrubbing about 4.5g of weight while the Xray set is about 4g higher than stock and both include all needed hardware. The B6.1 set is usable for all B6.1-based kits such as the B6.1, T6.1 and SC6.1 as well as the older spec B6, while the Xray mounts can be used with all XB2 and XT2 series kits, however it is understood that JConcepts buggy bodies for the XB2 do not provide enough clearance for the tabs.
Exotek have introduced new option parts for the Xray XB4, XB2 and XT2 kits. First up is the Flite 72T centre spool set for stock class racing with the XB4 4WD buggy. The ultra lightweight centre spool set greatly reduces the rotating mass of the drivetrain for that extra boost in 13.5T and 17.5T spec racing. The Exotek spool set weighs 18g with the spur gear and the included coated hard steel outdrive cups. The machined 72T POM spur gear is included and bolts on to the lightweight alloy spool. The set is intended for non-boosted stock classes only and it is also compatible with 48 pitch Kimbrough-style spur gear.
View more details & images here
Exotek have introduced a set of collars for the popular MIP hex wrenches. The identification collars complete the wrenches with easy to see colour-coded polished and anodised alloy collars. The items are also laser etched with matching metric size labels for the most popular sized 1.5mm, 2.0mm, 2.5mm and 3.0mm. wrenches. The set includes four direct fit collars but no wrenches.
Coming from Exotek and made for the Tekno RC EB410 buggy is an aluminium steering crank set. The reinforced 7075 alloy design eliminates the problem of the hex bearing posts stripping in the plastic cranks, allowing for easier maintenance and disassembly and the set includes steel bearing posts that doesn’t mushroom when assembled which also makes for easier bearing removal. The steering cranks come in a special glossy navy blue anodising to match the remainder of the car’s optionals and they are compatible with both the stock and the Exotek steering rack.
