Red RC » Factory Team

October 30, 2020

Factory Team B74.1 carbon fibre options

Four new Factory Team option parts are now available for the RC10B74.1 and RC10B74.1D buggy. First up is this 31mm V2 tower which is made to adapt the larger volume 31mm rear shock bodies to your B74.1 for conditions where you need improved jump ‘flat landing’. The V2 tower is designed to work with the same setup / stroke and 27.5mm shock shaft as the kit, with no up-travel limiters required. Next up is the FT carbon fibre ESC tray, shedding 2 grams of weight (6g vs. 8g) compared with the moulded plastic version and lowering the ESC at only 1.5mm thick. Finally there is two new chassis brace support sets, both made from 2mm thick carbon fibre. The ‘Flex’ chassis brace design is narrowed along the centre line to 5mm for additional torsional flex which is an advantage on bumpy dirt tracks or uneven, multi-surface outdoor turf tracks. The other chassis brace supports are a more rigid option than the kit G10 chassis brace support, used for high traction or when racers want to tune out traction.

View the other new parts here

October 15, 2020

Factory Team aluminium clamping throttle servo horn

Improve durability and throttle/brake feel with this new Factory Team aluminium clamping throttle servo horn. Machined from high quality 7075 aluminium and laser-etched with Factory Team branding, this steering servo horn will add peace of mind knowing there will be no DNF caused by breakage, while throttle and brake feel are improved due to the reduced flex. The clamping design also ensures a secure fit to any servo with matching spline count. Available for 23T and 25T splines.

Source: Team Associated [associatedelectrics.com]

September 29, 2020

Factory Team RC8B3 4-shoe steel flywheel

Team Associated now offer a new optional Factory Team 4-shoe steel flywheel for the RC8B3. A direct replacement for the standard aluminium version (12 grams), the steel flywheel (36 grams) is heavier and therefore increases the overall rotating mass of the clutch assembly. This offers a more stable engine idle and a smoother bottom end throttle feel.

Source: Team Associated [associatedelectrics.com]

January 31, 2012

Team Associated SC10 4×4 factory team

Starting with the already awesome SC10 4×4, Team Associated takes our 4WD short course truck to the next level with the full Factory Team treatment. The new high performance features found on the SC10 4×4 Factory Team kit have been designed to give this truck the competitive edge in the dirt and on the track. The SC10 4×4 Factory Team kit is built from the same race proven composite modular chassis but with many new upgraded features added. The chassis layout has been reconfigured and now features a centralized-mass battery mount. This allows the use of a saddle pack battery to optimize the weight distribution of the chassis. With the addition of the Factory Team carbon fiber chassis brace rod, the chassis flex has been made more consistent and predictable for an overall improvement in handling and traction.

View more images and details here

October 15, 2010

Factory Team half-weight shock fluids

No more mixing your shock fluids to get the right viscosity, with these Factory Team half-weight shock fluids. Sold in 2 fl oz bottles, they are available in 22.5wt, 27.5wt, 32.5wt, 37.5wt, 42.5wt & 47.5wt, you can now get the right weight every time. Made in the USA exclusively for Team Associated by Lucas Oil Products Inc.

Source: Factory Team [rc10.com]

April 23, 2010

Factory Team V2 threaded shocks

New from the Factory Team are these new V2 threaded shocks that are compatible with all current RTR and Factory Team shocks on B4, B4.1, T4, T4.1, B44 and SC10. Sold in a complete shock absorber set or just as shock body set, the full sets feature bleed screw shock caps for quick and easy shock bleeding, and a simplified seal packages that uses two O-rings and one spacer. The threaded lower seal cap is made of a low-friction material and acts as a guide bushing, while the titanium nitride “Gold” coated shock shafts offer smooth action. For pre load adjustment the threaded shock collars, with O-rings, keep the settings secure. These new shocks work with existing shock shafts, pistons, O-rings, shock ends, spring cups and shock caps.

Click here to see the other sets

February 19, 2010

Factory Team metric screws

Associated’s Factory Team have announced that their aluminium metric screws are now available in single size packages. These blue anodised M2 and M2.5 screws come four per package while M3 screws come six per package.

Source: Associated [rc10.com]

May 30, 2009

Factory Team RC8 Aluminium options

Team Associated have released all-new shock towers and suspension mounts that have been developed by their engineering staff and were race tested by factory team drivers. With a wide variety of tuning options for varying track conditions, both front and rear towers feature additional shock mounting positions while the rear tower also includes additional camber link positions. CNC machined from 7075 aluminium, these new shock towers are standard equipment on the RC8B and can be fitted to existing RC8, RC8RS, and RC8e chassis. All installation hardware and a set of hinge pin bushings (front) are included. Also the new suspension mounts come standard on the RC8B, but are the perfect upgrade for all RC8, RC8T, and SC8 vehicles. Because they are CNC machined from 7075 aluminium, they offer a precision fit and are extremely durable. All plates come with the necessary installation hardware, while the B and D-plate come with additional titanium nitride-coated hinge pins and a set of hinge pin bushings.

Click here to see the other products