Hot Bodies have released a whole range of new lightweight accessories used by Team HB drivers and suitable for the D8 and D8T cars. Replacing the stock steel versions, these lightweight aluminium parts include the upper shock fixing balls, upper suspension fixing balls, steering push rod balls, sway bar holders, shock end balls and finally king pin bushings. All parts are hard coated and sold in sets of 4.
Click here to see the other lightweight parts
Tekno RC have released their lightened LCG Chassis for the Hot Bodies D8 buggy. Claiming to be the ultimate chassis upgrade for your D8, it is 90g/3.2oz lighter than stock, which is a 23% weight savings. Low CG cutout design lowers the engine and radio tray by 1mm, fuel tank is lowered by 2mm and integrated droop screws offer more precise droop adjustment and better wear. CNC machined from 4mm aircraft grade 7075-T6 aluminium it has been ard anodized for increased wear resistance
Source: Tekno RC [teknorc.com]
Hot Bodies have release a whole load of new products for their main line of competition chassis’ but we will start with the Cyclone TC. Now you can adapt your Cyclone and Cyclone TC chassis to LiPo power with this LiPo battery upper deck conversion set, which comes complete with upper deck, aluminium block and all the necessary hardware you will need to get up and running. New rear 0º degree hubs have been machined from billet aluminium and anodized purple for added durability and custom looks. Some new aluminum front spindles are more than just aesthetic, but also stronger and more precise on the track. Finally for the TC are the DCJ drive shafts, that maintain better corner speed while drastically reducing wheel chatter. The DCJ or (Double Cardan joint) shaft breaks the single pivot point into two pivot points resulting in less drag and shallower shaft angles during sharp turning. For the Cyclone D4 and D4 WCE come an aluminium centre cup joint set that helps you loose weight where it counts the most, in the drivetrain. Less rotating mass equals quicker acceleration response and higher top speeds. The buggy also gets a complete set of both front and rear steel universal drive shafts. For the World Champion D8 buggy there are new universal drive shafts made from Japanese steel. Tougher than stock, they are easily identifiable as WCE with a light silver coating and come in 92mm length instead of stock 91mm, which gives a little bit of extra length to prevent pop outs and give an extra bit of down travel. The centre drive shafts also get the Japanese steel treatment.
Click here to see the other options
New from Hot Bodies for the Cyclone TC and Cyclone S are these machined aluminium 0º degree rear hubs. Anodised purple, these heavy-duty parts are a lot stronger than the stock plastic versions and are a direct replacements. Sold in pairs.
Source: Hot Bodies [hotbodiesonline.com]
Hot Bodies have released a complete new line of 1/10th scale competition buggy tires. First up are the Beams tires which are suitable for hard & dry off-road surfaces such as hard-packed clay and ‘blue groove’ high bite conditions. Also for the rear are the Megabite tires, a mini-pin tire that is suitable for hard & dry off-road surfaces such as hard-packed clay, light dust conditions, and regular clay. Once again for the rear are Gigabite tires that are suitable for hard & dry off-road surfaces such as hard-packed clay and ‘blue groove’ and many more surfaces you might encounter. For the front are the Double Blades, suitable for hard & dry off-road surfaces such as hard-packed clay and ‘blue groove’ high bite conditions as well as a variety of other conditions. Finally, again for the front are these Fullslot tires for hard & dry off-road surfaces such as hard-packed clay and ‘blue groove’. All the tires are available in pink, red, white and blue compounds.
Click here to see the other tires
Hot Bodies have announced two new 190mm Moore-speed touring car body shells with the release of the Type B-C and the 09x. The former is designed for aggressive steering and high top speeds, as well as stability in the turns. It features a large front splitter for strong steering characteristics, flared wheel wells for increased tire clearance and a unique rear wing and wing mount for extra strength, straight-line stability and downforce. High door sills and a new-design rear bumper provide protection from impacts and reduce the need for marshals to repair the bodywork. The low-profile bonnet and one-of-a-kind roof channels increase airflow over the rear deck and wing for extra confidence in the turns and increased speeds. The Type 09x features a deep front splitter for aggressive steering and a smooth shape for high speeds and you’ll get great steering and excellent corner speed, the ideal choice for all sizes of tracks if you want a ‘locked in’ feeling on medium-bite surfaces. Moore-speed body shells include clear overspray film and convenient window mask plus a decal sheet featuring unique grilles, headlight and tail light details and both bodies are also available in a Lightweight version for extra speed.
Hot Bodies have released their Megabite mini-pin tires in a pink compound which are suitable for hard & dry off-road surfaces such as hard-packed clay, light dust conditions, and regular clay. With hundreds of short square pins arranged around the carcass providing fantastic traction on the corners and a central double-row of extra-wide treads giving you excellent acceleration and stopping power. The pink compound is their new extra soft compound for extra grip in low traction environments. HB’s new T-Dish yellow wheels utilize the maximum diameter allowed under the current rules and regulations. This makes for quicker response from the tires due to less sidewall flex. Their specially formulated plastic offers the perfect balance between rigidity and pliability, giving them impact resistance and flexion in the jumps and bumps yet maintain rigidity in the corners.
Click here to see the T-Dish wheel
Hot Bodies have released their new Murdeigo 190mm touring car body. Sold clear, this body offers high levels of downforce and excellent steering response on any track. Supplied with window masks for easy painting, decal sheets for adding a realistic finish, plus all the mounting screws and nuts.
Source: Hot Bodies [hbeurope.com]
