Red RC » JConcepts

May 8, 2019

JConcepts Dirt Webs Aqua A2 front tyre

JConcepts’ popular Dirt Webs 1/10th buggy front tyre is now also available in the Aqua A2 compound. Debuted at the 2018 ROAR 1/10th Nationals, and also used in the IFMAR World Championships in Perth Australia, the Aqua compound was the speedy option for the ultra dry, dusty groove conditions in both scales. The new compound labeled as Aqua A2 works alongside the traditional blue or R2 compound, however, it is much more friendly in these special indoor and outdoor conditions seen in the new generation. The Aqua is not a replacement for any compound but used as an alternative in warm and hot weather conditions and abrasive tracks.

Source: JConcepts [jconcepts.net]

May 8, 2019

JConcepts Ellipse stadium truck tyre

JConcepts’ Ellipse tyre is now also available in a variant for 1/10th scale stadium trucks. The Ellipse, named after the centre bar built into the tread, is a compliment to successful tyres such as the Dirt Webs and Space Bars. The web-style tyre was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The centre section of the tyre is a home run utilising a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability. The tyre has already won a Stock National title in the hands of Matthew Gonzalez at the 2019 JConcepts Stock Nationals at OCRC Raceway. The compound of choice for most indoor events, the exclusive gold compound, has shown to produce consistent results for racers week after week. Now, the Ellipse is also available in the traditional favourites, blue, green and black compound. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Source: JConcepts [jconcepts.net]

May 2, 2019

JConcepts Ellipse 1/10th buggy tyre

JConcepts have introduced their new Ellipse 1/10th buggy tyre in Blue, Aqua and R2 compound. Named after the center bar built into the tread, the tyre is a compliment to successful tyres such as the Dirt Webs and Space Bars. The “Web” style tyre was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The centre section of the tyre is a home run utilising a diamond “home plate” footprint to provide massive forward bite and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability. The compound of choice for most indoor events, the exclusive gold compound, has shown to produce consistent results for racers week after week. Now, the Ellipse is also available in the groove condition favorites, blue, Aqua and R2 compound. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and gray color complete the race tuned package.

Source: JConcepts [jconcepts.net]

April 24, 2019

JConcepts T6.1 & SC6.1 Fin titanium turnbuckle kit

Coming from JConcepts is their new Fin titanium turnbuckle set for the Team Associated T6.1 stadium and SC6.1 short course truck. Designed specifically for style, durability and performance, the base of the shafts design is centered around a .143” titanium hex size which gradually tapers down into a 3mm thread base design which accepts the standard AE ball-cup configuration. The focus of the styling surrounds the lengthened adjustment hex area and the finned cuts that rotate about the center. The turnbuckles are produced with left and right hand threads with the left being conveniently marked for easy orientation.

View more images here

April 19, 2019

JConcepts S1 TheCar body shell

JConcepts have introduced their new S1 body shell for JQRacing’s TheCar Black Edition nitro and TheE-Car Grey Edition electro buggy kits. First developed for the 2012 IFMAR World Championships, the Silencer has been a mainstay in the JConcepts product line which is available for a number of difference vehicles in the market. The JQRacing buggy has enjoyed a successful run world-wide and JConcepts has now created the iconic Silencer as a drop-fit for the vehicle. For the precise fit, the design has undergone major changes to match the JQ chassis side guards and body mount positioning. The Silencer stance cockpit allows ample room for the air cleaner and fuel tank access, a smoother high-speed windshield transition and increased flow around the engine heat-sink. A deep recess around the engine compartment with dual channeling out the rear provides air escape along with rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires. The extended runner features are placed on the rear-end of the body enhancing the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over the pipe, fuel tank and electrical / linkage make up the main pods. The end result has the body looking extremely low-profile with heavy JConcepts edginess and appeal. The Silencer is capped off with a cock-pit “shark fin” for more high-speed tracking stability and increased roof stiffness. The body is available in lightweight and ultra lightweight variants and includes window masks and a decal sheet.

Continue reading here

April 18, 2019

JConcepts SC6.1 street eliminator optionals

JConcepts have introduced new option parts for street eliminator converted Team Associated SC6.1 trucks in the form of a carbon fibre wheelie bar set and a carbon fibre shock tower. The wheelie bar kit contains carbon fibre rails, aluminium stand-offs, bearing holder and inner race support along with rubber sealed bearings and steel 3mm hardware. This assembly has been designed to work with a 3D printed part available separately from JConcepts’ Shapeways store. The #2714TD bulkhead skid for the wheelie bar is necessary to use existing SC6.1 parts along with the wheelie bar conversion parts to compete the assembly. The JConcepts item replaces #AE71125 which is part of the rear bumper assembly on the SC6.1. An accessory 3D printed net (2715TD) is additionally offered on the JConcepts Shapeways Store. The net is designed to work with conversion parts and can be purchased in white or black colours to match different builds and creations.

Continue reading here

March 5, 2019

JConcepts Finish Line flat bill hat

Coming from JConcepts is their new Finish Line flat bill hat. The hat itself is the flat bill style, snap-back for easy fit and rear mesh construction and design for great airflow. The front features the new logo stitched into the latest patch for the trendy look and trackside fashion statement. A staple for JConcepts drivers around the globe, the Finish Line hat stands-out at all racing events during podium photo shoots and racing accomplishments.

Source: JConcepts [jconcepts.net]

March 4, 2019

JConcepts S2 & F2 TLR 22 5.0 body shells

JConcepts have updated their popular S2 and F2 design body shells to now fit the TLR 22 5.0 buggy. Slammed overall height allows the S2 to whisk through the turns with a low centre of mass while the progressive cab design provides plenty of front-end force for superior balance and steering. A channeled roof directs the flow through the centre of the body while also increasing the rigidity of cockpit. The dual side-window design that has become famous on the JConcepts bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body giving the highly aero unit a stylish look with a tight fit and finish. Cut-lines are included on the body to accommodate stand-up and lay-down transmission layouts giving all out versatility.

Continue reading here