Red RC » JConcepts

October 17, 2017

JConcepts MBX7R Strike 3 buggy body shell

JConcepts have introduced their new Strike 3 body shell for the Mugen MBX7R buggy. The body samples elements from its famous relatives the Finnisher, Silencer and Striker but packs a slightly refined image. The base enhancements to the design come from the parallel to chassis side pods, that look traditional with 1/8th buggies of the past. A large rear-end winglet has been added to aid in the rear traction stability as well as stopping force. The offset of the race proven shell provides a compact fit for fuel tank, linkage and air filter assembly while the heavy channeling on the front windshield keeps the Strike 3 aligned at high-speed. Just behind the engine head, a sleek up-rising flows from the body like running water and a sharp rise in the rear wicker blocks flow to the rear tower and redirects to the rear wing area. The clear body set includes window templates and a decal sheet and it is a direct fit for the MBX7R.

View more images here

October 12, 2017

JConcepts 1966 Chevy II Nova drag racing body shell

Coming from JConcepts is the 1966 Chevy II Nova drag racing body shell. The lid shows off an extensive sharp-edged restyle based in part on the Super Nova concept vehicle. In general, proportions are squared up and features including a bold grille and semi-fastback roofline highlight the shape. Humped fenders in an angular rear-end were reminiscent of other Chevrolets from the era of style. The main shell is comprised of three pieces which includes intricate detail for the front and rear. The front-end closure shows off the single headlight style with deep recessed sections along the grille and front bumper to faithfully replicate the original. The rear closure section includes bumper detail, trunk works and vertical taillight cues. Aligning the front and rear sections are critical, but after a little paint and detailing, the Chevy comes together in magical fashion. In addition, the design team added a rear wing sectional to the project to bring the drag racing inspiration to life. The two-piece rear wing is trunk mounted with a lower support and upper wing with high-speed stabilising ribs for added performance. Included in each body set is a 1966 Chevy Nova II decal sheet, front-end grille closure piece, rear-end trunk/bumper closure, rear wing option including lower support and upper wing spoiler and the paint mask for all windows and rear wing, 3mm mounting hardware. As always, each body set is backed with JConcepts customer support and racing heritage. The Chevy II Nova measures a 13″/330mm wheelbase and the inside dimensions of the body are 10.75″/273mm wide front and 11″/297mm rear. The body is built for a 2WD SCT wheelbase length and narrowed to more resemble the original 1:1 counterpart.

View more images here

September 28, 2017

JConcepts Swaggers & Pin Downs SCT tyres

JConcepts have introduced their line of Swaggers and Pin Downs for the Short Course class. The Swagger SCT front tire has a multitude of heights and angular ribs for cornering speed, consistency and straight-line tracking ability and has shown to produce ultra fast lap times while also being easier to drive than other options on the market. The front tires work best on Carpet and Astroturf tracks where the racing line requires an aggressive style front tire. The Pin Downs feature a pin spiked tread, which is directional for added performance and stability. The directional nature of the pins were positioned to allow broken-in type pins to grip the surface in one direction, while the pins are more upright when oriented in the opposite direction. The bottoms of the pins have heavy radiuses which allow the pins to wear more consistently and not tear or rip off the carcass prematurely. Both tires are designed for industry standard SCT wheels.

View the Pin Downs here

September 26, 2017

JConcepts A-One Touring body

JConcepts confirms their entry into the touring car racing genre with the new A-One body. Designed and developed to compete amongst the elite, the new body incorporates the latest benefits of computer aided design with experience, patience and championship level results. The JConcepts team, together with Paul Wynn and Jason Ruona, have a lot of track-time in the on-road racing game and high-expectations for performance.

View more details & images here

September 21, 2017

JConcepts L1 Layla LMP body shell

Coming from JConcepts is the L1 Layla LMP body shell for 1/10th formula pan cars such as the Team Associated F6 and the Xray X1. The body has a low-slung appearance and offers complete chassis coverage and a front chin spoiler starts the design for improved steering response and front-end grip. The L1 rises over the suspension and blends with the tyre covers while the closed cockpit design resembles the LMP1 vehicles of the latest generation. The wrap-around window design and full length rear stabilising and rollover fin take over as the design focal point. Over the rear tyres, the shell drops off to close off the rear fender while a recessed area allows room for the rear wing option. The L1 is loaded with louvers, scoops and fine detailing to ensure not only authentic looks, but dedicated function. The separate rear adjustable wing is a two-piece design that attaches with included 3mm hardware. The top element of the wing supplies the down-force helping the L1 whisk through the turns and the side stand-offs bring the height to operating level and helps provide that all important stability. Included in each body set, L1 “Layla” decal sheet, two-piece rear wing, three-piece paint mask for wrap-around window, ten-piece 3mm screw and nut hardware. Body mounts, hardware, conversion or other necessary items for the final fit are not included, however the soon-to-be-released JConcepts part number #2468 contains all parts to convert RC10F6 to a LMP ready vehicle.

View more images here

September 20, 2017

JConcepts XB4 F2 buggy body shell

Coming from JConcepts is the new F2 body shell for the Xray XB4 2017 4WD buggy. Designed with aspects learned from the original Finnisher bodies, the F2 provides an even more aggressive look with included details which remain crucial to performance. An increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes performance and visible bias which help steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralise the at-speed handling. The rear of the pods have a dual step, scoop treatment which give a first in class look to the F2 body. The rear of the cab has the Finnisher step feature which allows the placement of a secondary side window and also several louver options off the rear. In addition to the newly designed body, JConcepts has included two of the latest Aero rear wings.

View more images here

August 29, 2017

JConcepts B6-series long shock carbon fibre rear tower

JConcepts have introduced a carbon fibre rare shock tower for the use with long configuration rear shocks. The 4mm thickness, genuine carbon material is durable, lightweight and features the JConcepts milled sections which help maintain strength while minimising weight. The three standard shock positions remain for quick and steady adjustments on the B6 and B6D kits.

View another image here

August 25, 2017

JConcepts Teazers 1/8th buggy tyre

Coming from JConcepts is the new Teazers 1/8th buggy tyre. Packed with over 2000 individual pins, the Teazers use a multi-height and width pin system to incorporate the dense pin count. The square based, angular lugs alternate in height and width to connect with a track surface by allowing the taller pins to reach deep and contour with the terrain. The shorter pins stiffen the base, add surface area and provide increased longevity for long main events. The tyres are meant to excel on tracks with dusty, bumpy and sometimes wet and dry areas and alternating bars support sections of the tyre where more forward grip is desired while the half-height design of the bar still allows flexibility. The Teazers feature three inner radial ribs for expansion support with hefty sidewall thickness for the increased durability. The tyre is available in blue and green compound and it comes including grey closed cell inserts.

Source: JConcepts [jconcepts.net]