Red RC » JConcepts

March 22, 2017

JConcepts 8ight 4.0 front scoop

Made for the 4.0 series of TLR 8ight off-road buggies is JConcepts’ new front scoop. It serves as a front nose-cone on the vehicle but with a front wing design that has shown to produce enhanced steering characteristics. The front scoop can be painted, left clear or frosted for the desired look, fit and finish. Reports from the pit area revealed an increased feel and sensitivity in the larger sweeping sections and helped jumping attitude in the most difficult driving sections.

Source: JConcepts [jconcepts.net]

March 16, 2017

JConcepts Skull snapback hat

JConcepts have introduced their latest merchandise sporting the new-for-2017 JC Skull logo, a snapback hat. The front sports the new logo in patch form on the black snapback hat material while the rear of the hat features mesh type material to stay cool for those warm days at the track.

Source: JConcepts [jconcepts.net]

March 14, 2017

JConcepts S2 B64-series buggy body shell

JConcepts have introduced the S2 body shell for the Team Associated B64 series of 1/10th 4WD off-road buggies. Sporting the distinctive Silencer 2 design with slammed overall height and a progressive cab design the body is meant to deliver good balance and steering. A channeled roof directs the flow through the center of the body while also increasing the rigidity of the cockpit. The dual side-window design that has become famous on the JC bodies remains to bring a traditional feel to the layout. The upper side-pods feature distinct vents used to help relieve hot air build-up inside the body for those high-powered runs or hot days at the track. Carved and detailed side-pods edge the body, giving the highly aero unit a stylish look with a tight fit and finish. The body fits both the B64 and B64D and it comes clear, including window masks, decal sheet and two Aero rear wings.

View more images here

March 10, 2017

JConcepts Pinion Puck pinion gear holder

Coming from JConcepts is the Pinion Puck pinion gear holder. The circular design and aluminium material surrounds the pinion gear and protects the finish of the valued gears from damage. Each Pinion Puck has steel pins pressed into location giving the proper placement for the pinion. The pins also provide a sturdy area for the holding set screw to clamp against. The gear holder is available in two variants, one for 17T to 26T 48 pitch gears and one for 27T to 36T 48 pitch gears. Each pinion cavity is laser etched, indicating proper size ranging and the centre features a recess to hold small components and also etched to indicate overall size of the Puck while displaying JConcepts branding. The carriers are available in blue or black colours.

View more images here

March 8, 2017

JConcepts 3-D-printed wire route sleeves

Coming from JConcepts are three new 3-D-printed wire route sleeves. The unique and small design of the wire sleeve pieces allow wiring to look clean and also aides in the overall appearance of the vehicle. First up is the 3-wire sleeve and motor ring that is made specifically for the Team Associated B64. It brings the A, B and C wires in close to the motor without touching. The built-in ring holds the wires in a clean position and minimises the height providing a little more room between body and wiring.

Continue reading here

March 8, 2017

JConcepts F-250 monster truck body & 2.2″ Tote wheels

JConcepts have introduced the 1979 Ford F-250 monster truck body and 3-D-printed 2.2″ Tote wheels. Starting with the body shell, the meticulous replica of the original truck features its heavily chiseled, square body look with enlarged, flat-top wheel wells and a recessed body line that extends down the entire side of the standard cab body. The included decal sheet details this section to appear like the chrome trim of yesteryear. It also sports that famous wrap-around front windshield, the recessed side windows are outlined and the body lines are all in place to show off that vintage look. On top of this the front headlights, grille, taillights and tailgate are replicated with a decal sheet giving that all important, high-impact look. Included in the package are also a separate front and rear bumper which can be attached with included hardware for the ultimate show and shine ride. The 11″ wheelbase gives drivers options for mounting to standard or extended length chassis while the flat bed area gives plenty of space for body mount locations or customised with bed cover look.

Continue reading here

March 3, 2017

JConcepts driver commemorative racing stripe T-shirts

JConcepts have introduced three new commemorative racing stripe T-shirts featuring Spencer Rivkin’s, JR Mitch’s and Renaud Savoya’s signature colours. An off-shoot of the original racing stripes T, the newly designed version pops with flare in the new colours. The shirt hosts the JConcepts.net logo and original tag line, World Proven Innovation and Design and features Spencer’s purple/blue, JR’s white/red or Reno’s yellow/orange signature colours. All shirts are made of 100 percent cotton and they are available in adult M to XXXL sizes.

View more images here

March 2, 2017

JConcepts Finnisher MBX-7TR body & XB2 gear shield

JConcepts have introduced the Finnisher body shell for the Mugen MBX-7TR as well as a 3-D-printed gear shield for laydown transmission equipped Xray XB2 buggies. Starting with the body, the popular and ROAR nationals winning Finnisher design is now also available for Mugen’s MBX-7TR truck. The slight cab forward design with a raked windshield makes the truck stand out as does the large centre fin which adds stability at high speeds. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum performance the included champion rear name plates provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

Continue reading here