Red RC » JConcepts

March 8, 2017

JConcepts 3-D-printed wire route sleeves

Coming from JConcepts are three new 3-D-printed wire route sleeves. The unique and small design of the wire sleeve pieces allow wiring to look clean and also aides in the overall appearance of the vehicle. First up is the 3-wire sleeve and motor ring that is made specifically for the Team Associated B64. It brings the A, B and C wires in close to the motor without touching. The built-in ring holds the wires in a clean position and minimises the height providing a little more room between body and wiring.

Continue reading here

March 8, 2017

JConcepts F-250 monster truck body & 2.2″ Tote wheels

JConcepts have introduced the 1979 Ford F-250 monster truck body and 3-D-printed 2.2″ Tote wheels. Starting with the body shell, the meticulous replica of the original truck features its heavily chiseled, square body look with enlarged, flat-top wheel wells and a recessed body line that extends down the entire side of the standard cab body. The included decal sheet details this section to appear like the chrome trim of yesteryear. It also sports that famous wrap-around front windshield, the recessed side windows are outlined and the body lines are all in place to show off that vintage look. On top of this the front headlights, grille, taillights and tailgate are replicated with a decal sheet giving that all important, high-impact look. Included in the package are also a separate front and rear bumper which can be attached with included hardware for the ultimate show and shine ride. The 11″ wheelbase gives drivers options for mounting to standard or extended length chassis while the flat bed area gives plenty of space for body mount locations or customised with bed cover look.

Continue reading here

March 3, 2017

JConcepts driver commemorative racing stripe T-shirts

JConcepts have introduced three new commemorative racing stripe T-shirts featuring Spencer Rivkin’s, JR Mitch’s and Renaud Savoya’s signature colours. An off-shoot of the original racing stripes T, the newly designed version pops with flare in the new colours. The shirt hosts the JConcepts.net logo and original tag line, World Proven Innovation and Design and features Spencer’s purple/blue, JR’s white/red or Reno’s yellow/orange signature colours. All shirts are made of 100 percent cotton and they are available in adult M to XXXL sizes.

View more images here

March 2, 2017

JConcepts Finnisher MBX-7TR body & XB2 gear shield

JConcepts have introduced the Finnisher body shell for the Mugen MBX-7TR as well as a 3-D-printed gear shield for laydown transmission equipped Xray XB2 buggies. Starting with the body, the popular and ROAR nationals winning Finnisher design is now also available for Mugen’s MBX-7TR truck. The slight cab forward design with a raked windshield makes the truck stand out as does the large centre fin which adds stability at high speeds. The Finnisher has a built-in air escape passage on the roof which allows the customer to fine-tune the body for maximum performance the included champion rear name plates provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

Continue reading here

March 1, 2017

JConcepts MBX7R/RC8B3 front scoop

Coming from JConcepts and made for the Mugen MBX7R and Team Associated RC8B3 is the front scoop. Introduced at the 2016 IFMAR World Championships in Las Vegas, the front scoop replaces the front nose-cone on the vehicle with a front wing design that has shown to produce enhanced steering characteristics. The scoop can be painted, left clear or frosted for the desired look, fit and finish and the set includes two pieces per package so a driver has enough to outfit their nitro and E-buggy with the same package.

Source: JConcepts [jconcepts.net]

March 1, 2017

JConcepts YZ-2 3-gear laydown gear shield

JConcepts have added a new 3-D-printed option part to their Shapeways store in the form of the 3-gear laydown transmission gear shield. The part slides directly on the Yokomo 3-gear transmission case and aligns with the stock geometry. The motor plate installs just over the gear shield and is positioned as normal. The gear shield is protection for the spur gear itself but also protects the low-profile body designs such as the JConcepts S2 and F2 bodies. The part is now available exclusively through Shapeways.

View another image here

February 28, 2017

JConcepts Skull T-shirts & sweatshirts

Coming from JConcepts are the new Skull design T-shirts and sweatshirts. The fresh shield logo with lightning bolts made its way into the R/C scene in early 2017 with new driver signings. The T-shirt sports a large logo in the front with a smaller on the back while the zipped hooded sweatshirt is the other way around with a small logo in the front and a large one on the back. The merchandise is available in all poplar adult sizes.

View the hoodie here

February 28, 2017

JConcepts B64 Fin titanium turnbuckle set

Coming from JConcepts and made for the Team Associated B64 1/10th 4WD buggy is the Fin titanium turnbuckle set. Offering the name-giving “finned” hex section the turnbuckles are usable with the standard AE ballcups and they not only save weight but also add visual impact. The set includes seven turnbuckles with a suitable wrench being available separately.

View another image here