Red RC » JConcepts

August 24, 2016

JConcepts Ford F-250 Super-Duty SuperCab MT body

Made for 1/10th scale monster trucks such as the Traxxas Stampede and HPI Wheely King is JConcepts’ new Ford F-250 Super-Duty SuperCab bodyshell. Resembling the 2011 variant of Ford’s popular pick-up truck, the body features the SuperCab design with recessed and sliding rear window treatment mated with spot-on wheel well size for a mini monster and fender flares that blend to form the unmistakable Super Duty look. The bed area is flat and resembles that smooth bed cover look of the full-scale monster vehicles. The structure of the bed features ridged detail, tailgate and rear roll-pan look with scale touches, finish off the design. Includes without the clear bodyshell come window masks and a full decal sheet.

View more images here

August 23, 2016

JConcepts B6-series Aero short chord rear wing

JConcepts have introduced the new B6-series Aero short chord rear wing. The new Aero wing has intriguing details, a leading edge that drops below the mounting point that acts in a scooping manner. What separates the new wing from the standard is the shorter deck length, otherwise known as the “chord length”. The shorter chord has less rear overhang allowing for quicker rotation in the 180 degree turns and will have less impact in gusty wind conditions or long aerial manoeuvres. The centre channel is just narrow enough for the B6 wing mount assembly but drops the wing at just the correct height and position. The side-dams feature large openings for tyre clearance and expansion. A forward gurney option gives drivers an adjustment that previously hasn’t been available in the class and clipped rear corners help minimise flex breakage which is so common on 1/10th off-road racing machines. The joint wing assembly includes two wing pieces suitable for both the B6 and B6D buggy.

Source: JConcepts [jconcepts.net]

August 22, 2016

JConcepts RB6/6.6 Aero front wings

JConcepts have introduced the Aero front wings for the Kyosho RB6 and RB6.6. Front wings are not a new concept, however, they are new to the latest generation of mid-motor vehicles and demanding high-speed and grippy circuits. The latest vehicle to receive JCs “Aero” treatment is Kyosho’s RB6 line of vehicles with the wings being available in a wide and narrow variant, allowing for different aerodynamic setups while the fine-tuning can executed by adjusting the trim-able rear gurney section. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit to the popular Kyosho series of vehicles. The wings come in two piece packages including either a pair of wide or narrow wings.

View the narrow front wing set here

August 19, 2016

JConcepts XB2 Aero front wings

Coming from JConcepts and made for the Xray XB2 buggies are the Aero front wings. Already available for a range of 2WD buggy the tailor-made wings help to fine-tune the buggy’s aerodynamic behaviour. The Aero front wing mounts in “clean air” and is quite easy to trim, use and test without sacrificing all important track time. Available in two widths, the driver can choose either the “narrow” for a lighter feel or “wide” for heavier down force. Each set includes two narrow or two wide wings.

View the narrow front wing here

August 18, 2016

JConcepts Yokomo YZ2 narrow & wide front wings

Tailor-made for Yokomo’s YZ2 buggy are JConcepts’ new Aero narrow and wide front wings. Mounted above the front shock tower on the Yokomo YZ2 series of vehicles, the Aero front wing mounts in clean air and is quite easy to trim, use and test without sacrificing all important track time. Available in two widths, the driver can choose either the narrow variant for a lighter feel or the wide wing for heavier down force. The Aero wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. Cut lines are included for easy trimming while triple wing mount dimples are included for a bolt-on fit to the popular Yokomo series of vehicles. The wings come clear and in sets of either two narrow or two wide wings.

View the narrow front wings here

August 17, 2016

Dirt Racing Products recessed ball-stud washer set

JConcepts have released another Brian “Dirt” Kinwald product in the form of the Dirt Racing Products recessed washer set that was designed to offer two ball-stud height adjustments while utilizing a single washer. The 2 and 3mm washers feature a 1mm recess; this allows a driver to simply flip orientation for desired height. The large diameter of the washer provides a steady footing against plastic and aluminum components while the milled and recessed grooves easily indicate which height is in hand. Included in each package are four pieces of the 2 to 1mm washer and two pieces of the 3 to 2mm washer. In addition, a 0.5mm shim is also included for the ultimate in fine tuning adjustment and can be used alongside the recessed washers. Anodized in black, the washers can be used as a technical tuning option or simply during a “black-out vehicle build.

View another image here

August 17, 2016

JConcepts 1993 Ford F-250 SuperCab MT body

JConcepts 1993 Ford F-250 SuperCab MT body-1

JConcepts are busy releasing more 1990’s monster truck bodyshells with the latest offering being the 1993 Ford F-250 SuperCab. Resembling the popular ninth generation truck, the body drops on a variety of long monster trucks which range from 12.5″ to 13” wheelbase. Included come a comprehensive decal sheet, window masks and also an attachable Racerback.

View more images here

August 16, 2016

JConcepts RC8T3 Finnisher bodyshell

JConcepts have introduced the Finnisher bodyshell for the Team Associated RC8T3 and T3e. Winner of the 2016 ROAR National Championship in the hands of Spencer Rivkin, the body features a slight cab forward, raked windshield and aggressive stance. A wide front hood scoop allows plenty of clearance for front suspension and the body incorporates a large center fin which begins on the roof line and finishes just past the half-way point on the bed. An extended front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight. The body incorporates pre-dimpled body post locations and it also includes champion rear name plates which provide additional high-speed stability and improved positioning of the rear bed rails to strengthen the assembly. Overall handling has been improved by balancing the bias between the cab location and rear wing placement which control the majority of the aero affects of the aggressively styled body.

View more images here