Red RC » JConcepts

April 28, 2016

JConcepts B5 Aero front scoop

JConcepts have introduced the Aero front scoop for Team Associated B5-series buggies. Usable on all buggies with flat front arm tower setup, the option part is a simple yet effective way to gain some response in the front-end in high-speed situations. The scoop provides a more neutral feel low-speed and tends to numb out the steering in 180 degree corners while providing great holding power in high-speed sweeping corners typically associated with larger track layouts and conditions. Cut lines are included for easy trimming while dimples are located on the wing itself to indicate where to mount to the front shock tower. The wing uses 2x8mm screws for mounting but the needed screw holes need to be drilled by yourself.

View another image here

April 20, 2016

JConcepts TLR 22 3.0 titanium front axle

JConcepts have introduced a titanium front axle set for the TLR 22 3.0 2WD off-road buggy. Designed especially for the 3.0 the user-friendly and lightweight axles are of a single piece design, allowing the use of a traditional 4mm lock-nut instead of the stock screw type design originally used on the 22 platform. Titanium material lowers the weight, increases strength over aluminium and increases the bling factor by 10-fold. This design can easily be installed on the 22 3.0 buggy by using the existing hardware from the TLR kit.

Source: JConcepts [jconcept.net]

April 19, 2016

JConcepts 8ight 4.0 Fin titanium turnbuckle set

JConcepts have introduced the Fin titanium turnbuckle set for the TLR 8ight 4.0 nitro off-road buggy. The base of the six main suspension turnbuckles centers around a beefy 5mm square titanium base. The light-weight yet durable material is gradually machined down and tapers into a thread base design which accepts the rod ends featured in the kit. The unique JC set also features two additional turnbuckles, one for the throttle and one for the steering linkage.

Source: JConcepts [jconcepts.net]

April 14, 2016

JConcepts introduce RC10T carbon fibre option parts

Following yesterday’s introduction of the Ford F-150 bodyshell for the vintage Team Associated RC10T stadium truck, JConcepts have more options for the popular truck available. Coming soon are 3.0mm front and rear carbon fibre shock towers as well as a 2.5mm carbon fibre transmission brace, all of which are made from high-quality material. The shock towers are designed to replace the standard fibre glass units and offer improved rigidity for upped suspension efficiency while also adding visual impact and that factory look. As for the transmission brace, the part also adds rigidity and it makes for less rear end tweak and bending issues by replacing the stock composite part. The shock towers and rear transmission brace are direct replacements for the standard parts and they fit all RC10T models.

View the other new parts here

April 13, 2016

JConcepts RC10T Ford F-150 truck bodyshell

Available soon from JConcepts is the Ford F-150 bodyshell for Team Associated’s vintage RC10T truck. Back in the early 1990’s stadium truck were the next big thing and the RC10T gained massive popularity that still lives on today. Because of this and the ever rising interest in vintage racing, JConcepts have introduced the officially licensed F-150 body. It is narrow and sits close against the chassis to give racers the Team Truck look popular in the 1990’s. The styling is completely modelled after the most popular full-size truck of that era, the 1993 Ford F-150. The entire body shape has been chiselled, incorporating styling cues from the full-scale truck including wheel well shapes, door lines, window outlines and rear tailgate. The front-end sits just behind the front bumper while the headlight and grille area looks strikingly stock and with included decal sheet, looks like its street truck counterpart. The RC10T body is moulded in a durable gauge material and includes rear spoiler, mounting hardware and decal sheet to completely outfit a vintage ride.

View more images here

April 6, 2016

JConcepts Aero car-stand

JConcepts begins 2016 with fresh pit-ware for the 1/10th and 1/8th racing scene. Given to competitors at the Reedy Offroad Race of Champions earlier this year, the Aero car-stand in matte black material stands out in any pit area and supports the vehicle with its unique footing and highly chiseled shape. A rail-like border contains the shape while a deep draw along the sides creates a bold surface for included decal or custom wrap. A “V” step-down feature was added to the ends which brings the styling back down to earth while the void creates added space below the vehicle. A lower stance was built into the design and the smaller foot-print occupies minimal space in the pits. Top load pockets were incorporated as catch-all compartments for body clips, wheel nuts or any small items that are routinely changed during a race event. Triangle cushion pads are positioned on the top to provide support all the way to the edges on any platform vehicle to prevent slippage. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape “Striker” theme.

View another image of the stand here

March 24, 2016

JConcepts Aero lower front wing

JConcepts Aero lower front wing set

New from JConcepts comes the Aero lower from wing for 1/10th 2WD buggies such as the Team Associated B5M and TLR 22 3.0. The lower front wing mounts in a more forward position and is quite easy to trim, use and test without sacrificing all important track time. The front wing features a high-attack design with trim-able rear gurney options. A radical, edgy design which functions and compliments the Finnisher and Silencer body design includes elements and features fresh for the latest off-road conditions. The lower front wing comes in 2-piece sets, is not car specific and can be used on most all 1/10th off-road buggies. Due to customer and team demands, JConcepts has opted to release a genuine 3D printed front mount for the B5M and TLR 22 3.0 vehicle via the company’s Shapeways store. Although not an injection moulded part, the 3D print item should give ample support to drivers wanting to utilise the JConcepts designed parts for a completely matched setup as used by the factory race team.

View more images here

March 23, 2016

JConcepts 1989 Ford F-250 monster truck bodyshell

JConcepts have introduced the 1989 Ford F-250 monster truck bodyshell. The must-have body of the 1980’s was featured on several of the most popular full-size monster trucks during this generation and always proved to be popular among the Ford enthusiasts and always wreaked havoc on the competition. The 1989 F-Series carries over the same body style from the previous generation, yet sports a new rounded front clip that improves vehicle aerodynamics over its predecessors. The softened body lines around the rear of the bed and large fender arches around the wheel wells provides the scale monster truck look. The body features flush-fitting grille and headlights, wrap-around parking lights, a minimalist grille and an accurate and clean-looking Ford/JConcepts decal sheet. The 10.5″ wheelbase and 7″ wide body comes clear and it fits a variety of R/C monster trucks including the iconic Tamiya Clod Buster.

View more images here