Red RC » JConcepts

March 19, 2015

JConcepts Finnisher T5M bodyshell

JConcepts introduce the Finnisher bodyshell for the Team Associated T5M stadium truck. The slight cab forward, raked windshield and aggressive stance highlight a performance oriented core. A revised front hood scoop allows plenty of clearance for the T5M geometry while smoothing out the front down force area. A front chin spoiler, headlight and grill protect the front-end from unwanted up-drafts during flight and like the ROAR National Champion Hi-Flow SCT body, the Finnisher body has built-in air escape passages which allow the customer to fine-tune the body for maximum outdoor performance. The body includes the high performance gurney spoiler which increases rear grip and balances the handling characteristics of the aggressively styled body.

Click here to view more photos

March 4, 2015

JConcepts Ford Atlas SCT bodyshell

JConcepts introduce the Ford Atlas SCT Absolute Scaler bodyshell. Specifically built for the Traxxas Slash and Slash 4×4 chassis it provides even more versatility to the wildly successful platforms. Fitting bumper to bumper, the body has all the possible detail of its full-scale counterpart starting behind that outsized grille. Split headlight design with corner reveal turn signal points the Atlas in the right direction while edgy hood detail bulks around the fenders to provide plenty of clearance for an assortment of SCT tyres. The extra cab look is defined by the recessed windows and the roof has a unique centre channel and extruded touches emulating the roof-carrying system shown on the prototype Atlas vehicle. The bed and fender area maintain a couple features that pique interest including sculpted out areas which look the part of the tie-downs on cargo walls and bed floor which are so commonplace in today’s pickup trucks. The Atlas includes a decal sheet for headlight, taillight with Ford and Atlas logos throughout. Decal trimmings include miscellaneous JConcepts logos, door handles, exhaust tips and running lights.

Click here to view more photos

February 27, 2015

JConcepts B44.3 Silencer bodyshell

The latest vehicle to receive JConcepts’ Silencer bodyshell treatment is the Team Associated B44.3 4WD buggy. The Silencer sports a special design aimed at today’s high-speed tracks with a profiled, Finnisher stance cockpit and forward raised side-pods. A smooth, high-speed transition around the cab keeps the Silencer heading in the right direction while a slight recess just behind the cab with channeling out the rear provides rear end stability. The side pods have a clipped rear end, narrowing the rear by angling in just in front of the rear tyres. The rear side-pods angle sharply toward the shock tower and wing, enhancing the force placed on the rear pods during high-speed acceleration. Included with the body come two 6.5″ Hi-Clearance rear wings, window masks a decal sheet.

Click here to view more photos

February 25, 2015

JConcepts Scorpios 1.9″ all-terrain scaling tyre

JConcepts Scorpios 1.9" all-terrain scaling tyre

Following the Ruptures 1.9″ performance scaling tyre JConcepts also introduce the Scorpios, an all-terrain variant. It features scale looks and extra tall size and profile with a closely knit tread resembling a 1:1 scale tyre. The padded arrangement of tread makes the tyre ideal for transitioning from the hard road to dirt and then into rocky and uneven terrain. Once power is applied to the vehicle, the tread spacing opens up which allows for some deep digging making it a great working tyre in dirt and muddy conditions. Each tread block has finely cut edges with a healthy radius where the block meets the tyre body. Each block features slight cuts on top to open up and create some sling space while the outer most lug extends down the sidewall to stiffen the upper carcass and increase the pinch grip. The flexibility of the compound combined with the close arrangement gives the tire a grippy feel but still maintains that all important look. The large overall height provides plenty of ground clearance for an abundance of terrain and internal grid ribbing help maintain its upright structure during hard loads and on power bursts. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

February 24, 2015

JConcepts Ruptures 1.9″ performance scaling tyre

JConcepts Ruptures 1.9" performance scaling tyre

New from JConcepts comes the Ruptures 1.9″ performance scaling tyre in green compound. It is meant to be an extremely tacky yet versatile tyre and the design starts with a layout of individual “large islands” that react to directional and forward loading characteristics like a soft gummy candy. The long horizontal attack bars are connected with solid sidewall detail which braces the sidewall for the high impact situations. The centre “mini islands” help maintain spinning speed and at half height provide some space to sling clean during those dirty trail runs. The entire top level of the tread has built-in cuts and recessing which provide a sharp edge. A sidewall radial rib connected with a dual position arrow help maintain stability and help the driver squeak out of a tough situation. The carcass itself is extremely pliable which conforms to the vast majority of obstacles. Inside the carcass, JConcepts features a connected “Y” loop ribbing design which blends carefully into the sidewall. The bracing supports the lower half of the tire while maintaining the upper flex characteristics. The tyres include a soft open cell foam insert capable of standing up the super soft compound but flexible enough for sharp terrain.

Source: JConcepts [jconcepts.net]

February 6, 2015

JConcepts Dirt Racing Products

New from JConcepts come the Dirt Racing Products pit accessories, developed with the help of former IFMAR World Champion Brian Kinwald. First up is the Dirt Cleaner, a liquid used to clean un-mounted tyres prior to gluing. The product uses a clean and simple bottle with screw-top spout which ensures quick operation and two bottles are included in each package so one can be stored at a home work station while the other can be used trackside or while on the go.

Click here to continue reading

February 3, 2015

JConcepts Diamond Bar 2.2″ 2WD front buggy tyres

JConcepts Diamond Bar 2.2" 2WD front buggy tyres

JConcepts introduce the Diamond Bar 2.2″ 2WD front buggy tyres. In slightly warm conditions, if a track has developed a groove, the Diamond Bars steer more in low and high-speed sections but do not react “on edge” or “dig” themselves into a corner. The close arrangement and low pin height react on the grippy surface providing speed and agility while the overall tyre size and blended pin/carcass smooth out the ride and initial turn-in attitude. The tyres are meant to excel outdoor or indoor where the track has taken on rubber and a groove has formed. Available in blue, green and red compounds including Dirt Tech closed cell inserts, the Diamond Bar carcass has been designed to work on either 2.2″ or 61mm/2.4″ wheels. The tyre comes ready to mount as 2.2″ or by trimming the bead; it’s an exact fit onto 61mm/2.4″ wheels.

Source: JConcepts [jconcepts.net]

February 2, 2015

JConcepts Remix 1/8th buggy tyre

JConcepts introduce their latest 1/8th buggy tyre, the Remix. Tested during the busy racing season at races such as the ROAR Off-Road Nationals, the tyre is a crossover tread bringing two tyre lines together. With directional side-bars and straight forward block detail, the Remix will serve as a high-speed blue groove tyre on larger style and flowing track layouts and the sidebars react calmly to bumpy sections while still giving stability as borrowed from the Metrix tyre. The blocks are beefy and medium in width and height, the overlapping centre arrangement gives forward tracking stability and the sidebars handle the all important cornering support. Included with the tyre, that will be available in blue, green and red compound, come grey Dirt Tech inserts.

Source: JConcepts [jconcepts.net]