Red RC » JConcepts

September 13, 2013

JConcepts Nissan Armada SC body

New from JConcepts comes the radically looking Nissan Armada short course truck body. The exterior of the Armada is built to cater to racer demands. Aggressive, high-impact headlight and grille treatment has an unmistakable straight-on look. Included in the front hood design are reverse louvers which are built-in to allow two air-escape passages. The famous Nissan fender treatment has an additional raised section which allows plenty of front tire clearance under load. The raised section is double purpose and also functions as an additional air escape feature while the low-profile roof line helps maintain a low centre of gravity allowing the SUV to transition the turns like a JConcepts heritage truck design. Two, rear, easy to trim, Hi-Flow cut-outs chiseled between the SUV rear windows along with upper access for ream-able hole cut-outs complete a polished air release package. The body comes with decal sheet and window masks and is a direct fit on Slash, SC10, XXX-SCT, SCT-E and SCT 410 trucks with others may fit with additional trimming.

Click here to view more photos

September 11, 2013

JConcepts RB6/RT6 aluminium steering bellcrank set

JConcepts have a new aluminium option part for the Kyosho RB6 and RT6 available in the form of a steering bellcrank set. The servo saver-less aluminium steering system is CNC-machined and replaces the stock plastic levers with a more rigid solution for improved steering feel and response on high grip surfaces. The fit of the new bellcranks has been improved to help eliminate binding when assembled and the parts are available in blue or black colour.

Click here to view more photos

September 4, 2013

JConcepts 8ight 3.0 carbon fibre shock towers

JConcepts introduce carbon fibre shock towers for the TLR 8ight 3.0 buggy. Machined from 5mm high-quality carbon fibre material the towers resemble the stock geometry with the rear one sporting additional camber link positions for added tuneability. The lightweight parts scrub around 18g of weight compared to the kit’s aluminium shock stays and feature additional reinforcement ribs for added strength.

Click here to view the rear shock tower

September 3, 2013

JConcepts RB6/RT6 honeycomb motor mount

Following variants for Team Associated and TLR off-road vehicles JConcepts now release the honeycomb motor mount for Kyosho RB6 and RT6 kits. Machined from 3mm aluminium the motor plate features a special design to increase stiffness compared to conventional slotted heatsink motor mounts while still being light of weight thanks to numerous milled-out pockets. The motor mount is a direct replacement and available in blue or black colour.

Click here to view the black colour variant

August 29, 2013

JConcepts TLR 22 motor plate & Scalpel shock limiters

After introducing the honeycomb design aluminium motor plate for Team Associated B4 based vehicles JConcepts now have the respective plate for TLR 22 based buggies and trucks available. Also new is a big bore shock limiter set for the Scalpel conversion kit. Starting with the motor plate, the part is machined from tough 3mm aluminium and features honeycomb shaped milled-out sections to reduce weight and in order to increase the surface for better cooling of highly stressed motors. The special design promises improved rigidity over conventional ‘slotted’ designs while keeping the weight as low as possible. The motor plate is available in blue and black colour and a direct replacement for the stock part.

Click here to continue reading

August 29, 2013

JConcepts AE 2WD aluminium motor mount

JConcepts introduce the aluminium honeycomb motor mount for Team Associated’s B4, T4 and SC10 line of off-road vehicles. Machined from 3mm high quality aluminium the design of the motor plate improves overall rigidity over conventional ‘slotted’ designs as the honeycomb sections holes offer more stability in multiple directions while reducing weight at the same time. Chamfered edges let the beefy plate look more skinny than it is. The plate is a direct replacement and available in blue and black colour.

Click here to view more photos

August 28, 2013

JConcepts RB6/RT6 aluminium wing mounts

JConcepts introduce the next option part for Kyosho’s RB6 buggy in the form of these aluminium wing mounts. The triangular shaped mount features a stout support from tower to mount and tower to transmission, braced with a lightweight rib feature between providing a steady platform up top shaped for the standard body clip attachment. Standard hardware is used throughout making it a quick and easy update on site or during a typical wrench day. The mounts are available in blue or black colour and sport etched JC logos.

Click here to see the black colour variant

August 27, 2013

JConcepts JC Racing tires theme t-shirt

JConcepts has released a newly designed t-shirt based on the popular JC Racing tires theme. This new t-shirt sports a completely detailed front logo design including the popular JConcepts.net along with graffiti type ‘Racing Tires’ font. The image is based around the Dirt Nitro Challenge championship tire, the Metrix. The back of the shirt includes an even larger version of the front print identifying the elements that go into a successful race tire line. The shirts are made of a heavy-duty 50/50 Cotton/Polyester blend and are available in the usual range of sizes.

Source: JConcepts [jconcepts.net]