Red RC » JConcepts

February 12, 2013

JConcepts MBX7 Silencer body shell

New from JConcepts comes the Silencer body shell for the Mugen MBX7 buggy. Intended especially for high speed tracks such as the one found at the 2012 IFMAR World Championship in Buenos Aires, the body was designed from the ground up and features a narrowed, Finisher stance cockpit for better fuel tank access, a smoother high-speed transition and increased flow around the engine heat-sink. A deep recess around the heat-sink area with dual channeling out the rear provides air escape along with rear-end stability. The Silencer side-pods have a clipped rear-end, narrowing the rear by angling just in front of the rear tires. The extended runner features are placed on the rear-end of the body enhancing the force placed on the rear pods during high-speed acceleration. The main pods are heavily chamfered and a more heat-shrink design over the pipe, fuel tank and electrical/linkage make up the main pods. The body comes clear, including window masks and decal sheet.

Click here to view more photos

January 11, 2013

JConcepts SC10 front body mount

JConcepts adds another top quality carbon fiber accessory to the already hefty list for the SC10 line of vehicles with the SC10 front body mount. Support of the body mass is very critical in SCT performance and shoring up the front body mount flexibility was a major focus with this new front body mount. Heavy-duty but light-weight, 3mm carbon fiber is the base of the design which follows along the geometry and stock mounting holes on the SC10 front shock tower. Recessed portions allow for the adjustable mount towers to drop straight into place and fasten with the stock socket-head hardware. Some aesthetically pleasing pockets have been machined into the face of the mount, lowering the overall weight of the part and for brand recognition.

Source: JConcepts [jconcepts.net]

January 11, 2013

JConcepts B44.2 Monroe carbon battery brace

The Monroe carbon fiber battery brace by JConcepts for the B44.2 addresses all the needs of the racer in one simple package. Constructed in genuine 2.5mm carbon fiber material, the Monroe packs a light-weight punch from the beginning. The slim and light-weight design allows it to swing 90 degree articulation which provides the necessary amount of room to install or remove the saddle battery packs. Security is provided by utilizing the stock hardware with the pivot ball used in the rear and lever / latch system in the front. Swing the lever to open and close and the Monroe provides the room to easily exchange battery packs on the fly.

Source: JConcepts [jconcepts.net]

January 9, 2013

JConcepts Slash 4×4 Platinum over-tray

When racing on a loamy or top soil track surface, the inside of the Low CG Slash or Rally chassis can become loaded with dirt or debris which creates extra weight. With the JConcepts over-tray these worries are minimized with the simple and functional over-tray. Fitting nicely under the body it hugs the outside dimension of the Low CG Slash and Rally chassis protecting the inside from unwanted excess dirt and debris build-up during racing conditions. The over-tray is built with extra height and rake to provide extra room for various electrical and battery configurations.

Source: JConcepts [jconcepts.net]

January 9, 2013

JConcepts 2012 Chevy Silverado for Traxxas Rustler

JConcepts introduces the 2012 Chevy Silverado 1500 body for the Traxxas Rustler. Starting with its low-profile design, beefy fenders and noteworthy Silverado appearance, the 1500 body is inspired by the looks of a class leading full-size pick-up, loaded with performance features. Fitting directly on the popular Traxxas Rustler line of vehicles, the Chevy 1500 is just what you have been looking for. The JConcepts body is a racer starting with the slammed look and blended 1:1 inspired appearance. The Chevy 1500 pops out as a high-voltage performer and packs in the detailed design you have come to expect from JConcepts. Extruded front and rear fender flares for maximum tire and linkage clearance include a slight hood-scoop raised portion to bulk up the front-end. The rear bed has built-in clearance for the Rustler shock tower and shocks to help maintain that sleek appearance. The body comes included with a spoiler on the back of the body mold which can be trimmed and detailed to drop right on the rear and secured with 2 included JConcepts button head screws.

View another image of the Silverado here

January 2, 2013

JConcepts Stackers and Black Jackets tires

JConcepts have introduced two new tires for 1/8th offroad, the Stackers and Black Jackets. The Stackers is a culmination of successful DNA from the highly popular Hybrids and Crowbars tire tread patterns which reveals a heavy center lug design which is supported at the lower base with extra rib features and tiny fillets which provide a heavy forward gripping force. Directional slashes cut into the tread soften the lugs to absorb bumps and also increase the lug flexibility to accommodate loose conditions. The Black Jackets, constructed from very small square pins, provide additional grip on loose conditions with a light amount of dust and debris across the surface. The tread spacing near the outside rows are slightly open allowing maximum flexibility to adhere to smooth and slick surfaces providing a reasonable flex contact patch. The crisp center bar construction provides a wall-like pattern of tread which provides additional forward bite and also resists some high-expansion wear associated with typical small pin tires.

View the Black Jackets here

December 13, 2012

JConcepts TLR22 Monroe battery brace set

Battery hold-down security and simplicity are packed into 1 set with the introduction of the JConcepts TLR 22, 22T and 22SCT carbon fiber battery brace set. A simple hold-down system which takes into consideration racers utilizing a short and long battery configuration on a regular basis. Simply outfit the TLR vehicle of choice with the JConcepts battery brace set and racers can now secure their battery of choice with a carbon fiber and aluminum assembly. The set includes a compact, lightweight and versatile carbon fiber Monroe battery brace, JConcepts black anodized thumb / wrench nuts along with aluminium long and short, black anodized posts, mounting hardware and detailed instruction sheet.

Source: JConcepts [jconcepts.net]

December 11, 2012

JConcepts Hybrids in Black compound

JConcepts have unveiled a new compound specifically for cold or very loose racing conditions. Black, Mega Soft compound has been in development for over 1 year with testing at tracks, facilities and events around the world. This is not a replacement compound but simply a tuning option for drivers looking for extra grip in very cold climates or extremely loose conditions. It’s important to remember, compounds are crucial and to take advantage of a compound it must be utilized on the correct surface. JConcepts Hybrids for buggy and truggy (above) are now available in black compound.

Source: JConcepts [jconcepts.net]