Red RC » JConcepts

November 30, 2012

JConcepts 1/10th truck & buggy profiled inserts

JConcepts have released two new profiled inserts for 1/10th truck and 1/10th buggy. The insert for 1/10th racing trucks was debuted during the 2012 Cactus Classic and has been used in a testing phase throughout 2012. The material and design is very similar to the popular 1/10th buggy rear insert giving it a medium to firm feel. The new 3206-3 1/10th buggy rear insert comes on the heels of the success of the 3206-2 insert. The -3 insert as it is called, utilizes the same inner and outer cuts as the -2 but with a slightly rounder profile, the insert rounds the shape of the tire slightly which is advantageous in loose conditions with treaded tires or when using slick type tires.

View the buggy insert here

November 27, 2012

JConcepts B4.1, T4.1 and SC10 front axle

One of the best upgrades you can make to the Team Associated line of vehicles is a conversion to 12mm hex wheels. JConcepts has been on top of this conversion since its introduction with hex adapters and Mono wheels. A critical point of the conversion revolves around the front axle and surrounding geometry. Within the steering block the space is very tight and especially between the 2 front bearings where the front axles rests between the bearing bores in 1 plane and the king pin in the perpendicular plane. The JConcepts front axle design is based around high-quality steel construction, an outer bearing crush step and an inner 4-40 lock nut for security. The design eliminates c-clips, screws and other items which are hard to detect of issues which limit performance. The free spinning design includes axles, 4-40 mini lock-nuts, thin axle shims, decal and assembly instructions. Available for B4.1 (above), T4.1 and SC10.

Source: JConcepts [jconcepts.net]

November 9, 2012

JConcepts 2.8″ tires on Rulux wheels

JConcepts have released two new additions to their already extensive line up of pre mounts with their 2.8″ Subcultures & G-Locs now available on white Rulux wheels. Subcultures are now available in the popular 2.8″ bead mounting diameter used on the popular Traxxas line of vehicles including the Stampede, Stampede 4×4, Rustler and Jato vehicles. The JConcepts design conveniently matches the Traxxas standardized design and is interchangeable back and forth between all Traxxas 2.8″ wheels and tires. The G-Locs 2.8” tire, by JConcepts is a super low-profile, aggressively treaded tire, purpose built for those aggressive speed-runs and specifically for vehicles capable of high-voltage or high-horsepower fun.

View the G-Locs pre mounts here

November 2, 2012

JConcepts body mount braces

Short Course trucks are very body sensitive. The proper body style, cut-outs, overall weight and roll characteristics can determine a properly handling vehicle. The TLR 22 SCT has a very flexible front and rear body mounts which provides several durability advantages but when it comes to performance, having a sturdy base to the body is critical. JConcepts body mount braces perform just as the name suggests and supports the body mount in high-force situations. While in the turns, the weight of the body hangs down in the rear and allows the body to flex toward the tires which causes unwanted handling and aero changes which may contribute to an ill handling vehicle. Simply install the brace as instructed and the body will now remain in a more standardized position on high-bite conditions and during hard corning.

Source: JConcepts [jconcepts.net]

November 1, 2012

JConcepts Kyosho RB6 Finnisher body

JConcepts have released a Finnisher body for the new Kyosho RB6. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps. Forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have been simplified and JC chamfered to remove unwanted changes in height to neutralize the at-speed handling. The chassis to body fit has been tightened up which eliminates empty voids that contribute to mid-flight directional changes. The rear of the cab has a new step feature which allows the placement of a secondary side window and also a louver which can be trimmed to allow air to escape at the top of the body. In addition to the newly designed body, JConcepts has included 2 of the latest 6.5″ wide Hi-Clearance rear wings.

View another image of the body her

October 29, 2012

JConcepts TLR 22 aluminum wing & body mount

JConcepts introduce the aluminum wing and body mount for the TLR 22 line-up of vehicles. CNC-machined from high quality aluminum and available in blue and black color, the mounts are designed in a creative but functional way to add rigidity to a high-impact area. They act as wing mount on the 22 buggy and as body mount on the 22T and come laser-engraved with JC logos.

Source: JConcepts [jconcepts.net]

October 26, 2012

JConcepts B44.2 Finnisher body

JConcepts are proud to introduce the Finnisher bodyshell for the Team Associated B44.2. The body is a drop fit solution for the new design B44.2 and features an increased windshield angle, forward cap placement and simplified side pods together with a stepped rear end design in order to give a better steering body with neutral at-speed handling and improved jump characteristics. The body comes clear, with window masks and including two 6.5″ Hi-Clearance rear wings.

Click here to view more photos

October 24, 2012

JConcepts green compound Bar Codes

JConcepts have announced that their 4wd front and racing truck front & rear Bar Codes are now available in green compound. Like the name suggests the alternating bar design combined with the addition of the Y side bars provide uncompromising support for blue and black groove conditions. Bar Codes in new condition excel on hard surfaces that have taken rubber with either dry or wet grooved conditions. Worn Bar Codes excel on indoor or outdoor clay tracks where a minimal dust groove has formed.

View the 4wd FR Bar Codes here