October 27, 2022

Racetec low profile cooling heads

Klinik RC has through their Racetec brand released new lightweight billet machined low profile cooling heads for O.S. and other similar engines. Cast stock heads are very heavy (70-90g) and not very efficient dissipating heat from your engine. Machined aluminium has 2x the thermal conductivity vs cast and the head weighs in at 30-40% less (53g) than the cast counterpart, significantly lowering COG. Machined from billet stock aluminium they are anodised in black, pink, red or blue and finished with lasering on the Racetec logos.

Click here for sideview of heads


October 18, 2022

Klinik RC ‘Racetec’ Compression Gauge

Klinik RC has through its Racetec brand released this nitro engine compression gauge.  The digital gauge makes checking the health of your engines a breeze. Check the health of your engines in or out of the car quickly and easily, document your engines wear and find potential problems with reliability or performance in seconds. Compression is a basic test of any engine from the car you drive to atv’s and now in RC engines. The compression gauge will fit any RC engine with a turbo style glow plug.  The gauge requires 2x AAA batteries.

Source: Klinik RC [klinikrc.com]


May 2, 2022

Klinik RC universal pro droop system

One of the most critical adjustments on 1/8 Buggies and Truggies is droop. After doing months of research with all the available tools on the market Klinik RC feel there was a better way. Some were almost 1mm off from advertised measurements, inconsistent and frankly poor quality. They wanted a system that is precise, consistent, super simple, small and lightweight for hauling. Measuring shock length only goes so far. The inconsistencies possible in hubs, arms, links, left to right and front to back is incredible. Tighten up your race program with Klinik RC’s universal pro droop system. This set works on both Buggy and Truggy and no other pieces need to be purchased. Machined from premium 3mm carbon fibre, weighs close to nothing and fits in the palm of your hand. The system comes with a super handy pouch to store components when not in use. “0” on the gauge indicates the centre of the axle is set to the bottom of the chassis, “+” indicates droop above the chassis, while “-” indicates droop below the chassis. Very simple.

View more images of the pro droop system here


January 25, 2022

Klinik RC Dry Air Filter for 1/8th offroad

New from Klinik RC is their Dry Air Filter for 1/8th nitro buggies and truggies. Klinik RC’s 100% Dry Air Filter system uses a proprietary synthetic media offering filter efficiency exceeding 99.8%. Stop dust and dirt from entering your carburettor and expensive engine. Simple maintenance and No Messy Oiling. Just blow the dust off from inside-out using low pressure compressed air and if extremely dirty, wash with Maxima Biowash and warm water, rinse from the inside out and allow to completely dr. Tne Dry Filter will replace dozens of foam inserts, oil and cleaners. The dry filter is unique because it’s not foam and it’s not a paper element. Its a synthetic membrane made by a leading desert race team in the USA.

Source: Schumacher [racing-cars.com]


November 13, 2020

Avid RC / Klinik B4 aluminium topshaft

Avid and Klinik have teamed up to offer this limited edition B4 hard anodised aluminium topshaft. Team Associated owners will love the 6.7grams savings in rotating mass for their B4.2, T4.2, C4.2, and SC10.2 gearbox. This new part is a drop-in replacement that will give you more punch, faster acceleration and faster laps.

Source: Avid RC [avidrc.com]


September 29, 2020

Klinik RC universal split battery cradle

Klinik RC have produced this universal split battery cradle for mounting your batteries to your offroad chassis. Designed to fit just about every 2wd buggy on the market from Associated, TLR, Yokomo, Kyosho, Serpent, Schumacher, Xray, PR etc, it comes supplied with the two carbon cradles parts, titanium fasteners, black washers and o-rings for holding the battery in place.

Source: Klinik RC [klinikrc.com]


September 7, 2020

Klinik RC sprayable liquid mask

Klinik RC have introduced their own range of water based, sprayable liquid mask. Available in 4oz, 8oz, 16oz and 32oz bottles, it has been made in the USA. Easily applied with spray gun or brush, it makes masking a breeze when applying paint, trim colors, lettering, flames, graphics, etc on all sorts of painting projects.

Source: Klinik RC [klinikrc.com]


August 19, 2020

Klinik RC Cougar 5 deg vertical ballstud caster blocks

Coming soon from Klinik RC are new 5 degree vertical ballstud caster blocks for the Schumacher Cougar Laydown and the forthcoming all-new Storm ST 2020 truck. Klink RC designed the caster blocks with the option of increasing front end grip, mechanical traction and steering response. With 0 washers these have the same geometry as a stock upright, adding washers will add initial steering response and increase corner speed. The parts will fit the Cougar Laydown, KC, KD and 2020 Storm racing truck kit.

View another image here