Red RC » Klinik RC

March 13, 2020

Klinik RC 5.5mm ball stud & link set

Coming from Klinik RC is their new 5.5mm ball stud and link end set for Schumacher off-road vehicles. The new optional ball ends feature lightweight premium grade 5 titanium 5.5mm ball studs, and the strong ball ends offer super free action guaranteed to never bind and sacrifice suspension performance and increase life. By increasing the ball diameter to 5.5mm the surface area is increase many times over stock which will greatly increase the lifespan before the parts are getting sloppy.

View more images here

January 13, 2020

Klinik RC 1/10th buggy carbon wing saver buttons

Klinik RC have announced the release of their new wing saver buttons for all popular 1/10th off-road buggies. Made in house at Klinik RC from 3mm carbon fibre, the wing shims feature a unique 3-step and pocketed design, making them super light, while adding some bling and ensuring the rear wing lasts much longer.

View more images here

December 27, 2019

Klinik RC Xd 3.5mm titanium turnbuckles

Klinik RC have intruded their newest Xd titanium turnbuckles, designed for Xtreme Duty applications. As speeds and grip continue to increase, the need for a stronger turnbuckle becomes necessary. Machined from solid billet grade 5 6Al4v titanium, the 3.5mm diameter turnbuckles are the goto in high-stress applications. They fit the Schumacher Cat L1/L1 Evo and Cougar Laydown and included with the Xd turnbuckle set comes a 1/8” drill bit to slightly enlarge the opening of the standard Schumacher ball cups.

View another image here

December 12, 2019

Klinik RC Cougar Laydown +3mm rear camber mount

Klinik RC have introduced their new +3mm rear camber mount for the Schumacher Cougar Laydown buggy. The mount is aimed at astro and carpet racers that have needed to stack 3-6mm in washers to obtain the correct roll centre for higher grip surfaces. Using the mount adds strength to the rear inner ball mount when running a higher roll centre. With no washers installed the parts offers the same height as the stock geometry with 3mm washer, hence the +3mm name.

Source: Klink RC [klinikrc.com]

November 29, 2019

Klinik RC Cat L1 simple battery cradle

Klinik RC have introduced their new simple battery cradle for the Schumacher Cat L1 4WD buggy. The design works with full size shorty up to 6000mAh and LCG packs utilising the full forward battery position which is considered to be the most popular among the L1 racers. The cradle is CNC milled from 3mm carbon fibre and allows changing batteries very simple and easy. Included in the set come two battery cradles, four hold down O-rings, 3x14mm screws as well as a decal sheet.

View another image here

November 6, 2019

Klinik RC wireless transmitter charging system

Klinik RC have introduced their are wireless transmitter charging system for Futaba, KO Propo and Sanwa transmitters. Designed to work with the most common transmitters on the market, Klinik RC have started with a blank slate and spent several months developing the correct charging pad, receiver coil and micro chip processors for safe, reliable and true balance charging. The designers engineered the charging coil to the smallest sizes possible. Measuring less than 1mm thick over most of the surface ensures it will fit very easily inside any battery compartment. The radio can easily stay topped off during any race day simply by placing on the pad between heats. Installation takes only a few minutes on average with no tools required. All that is needed is an available USB charge port, featured on most chargers and power supplies today, and a balance plug when using a 2S LiPo system. The charging system will work with all common transmitter batteries on the market regardless of capacity, all that is required is a battery with a standard JST-XH balance plug.

Continue View a list of the key features and more images here

September 16, 2019

Klinik RC B74 carbon fibre bellcrank steering arm

Klinik RC have introduced a reinforced carbon fibre bellcrank steering arm for the Team Associated B74 buggy. Machined from high-quality 3mm carbon fibre the arm is 0.5mm thicker than the standard part for improved durability and crash resistance. It is a direct fit and understood to match the stock steering geometry.

Source: Klinik RC [klinikrc.com]

March 25, 2019

Klinik RC battery cradles & Ghea gauge slider

Klinik RC have released two new items, the first of which is their battery cradle systems. Available for the Schumacher Cougar KC, AE B6.1/B6.1D and TLR 22 5.0 buggies, they are a single piece design made from 3mm carbon fibre. Super strong, lightweight and make it easy to install and removal of the battery. All the battery systems fit standard and LCG shorty liPos. Next up is the simple slider for Ghea ride height gauges. Made from 3mm carbon fibre and all stainless hardware, it makes checking ride height super easy.

View more product images here