Red RC » Kyosho

September 3, 2013

JConcepts RB6/RT6 honeycomb motor mount

Following variants for Team Associated and TLR off-road vehicles JConcepts now release the honeycomb motor mount for Kyosho RB6 and RT6 kits. Machined from 3mm aluminium the motor plate features a special design to increase stiffness compared to conventional slotted heatsink motor mounts while still being light of weight thanks to numerous milled-out pockets. The motor mount is a direct replacement and available in blue or black colour.

Click here to view the black colour variant

August 29, 2013

Kyosho aluminium servo arm

Kyosho now have new aluminium servo arms for 1/8th off-road vehicles available. Designed to replace the standard plastic kit arms with a more durable solution the CNC-machined and gun metal coloured offerings sport the Kyosho logo and an additional screw to clamp the servo horn against the servo’s output gear. The servo arm is available as Futaba and Sanwa/KO compatible variant.

Source: Kyosho [kyosho.de]

August 28, 2013

JConcepts RB6/RT6 aluminium wing mounts

JConcepts introduce the next option part for Kyosho’s RB6 buggy in the form of these aluminium wing mounts. The triangular shaped mount features a stout support from tower to mount and tower to transmission, braced with a lightweight rib feature between providing a steady platform up top shaped for the standard body clip attachment. Standard hardware is used throughout making it a quick and easy update on site or during a typical wrench day. The mounts are available in blue or black colour and sport etched JC logos.

Click here to see the black colour variant

August 26, 2013

JConcepts RB6/RT6 front suspension brace

JConcepts introduce the front aluminium suspension brace for the Kyosho RB6 and RT6. The all aluminium machined and anodised brace is a direct fit for the bulkhead of the Kyosho 2WD off-road vehicle and adds extra protection and a new look to the front end. The edging has been slightly chamfered to remove sharp corners and adds extra luster to an already polished looking piece. The part is available in blue or black colour and sport an etched JC logo.

Click here to view the black anodised part

August 22, 2013

Pro-Line Evo SC & RB6 Bulldog Gen3 bodies

Pro-Line introduce two new body shells in the form of the Evo SC for 1/10th short course trucks and the Bulldog Gen3 for Kyosho’s RB6 buggy. Starting with the SC body, it is designed to fit many of today’s trucks including the Traxxas Slash, Team Associated SC10, Losi XXX-SCT and SCTE as well as the Kyosho Ultima SC. The body sports an aggressive new look with a sloped nose section and protruded rear fenders while offering the maximum amount of air vents possible without harming overall stability. The result is a body with maximum efficiency, better cornering and jumping capabilities. Included come window masks and a decal sheet.

Click here to continue reading

August 8, 2013

Azarashi Redseal ZX-5 conversion kit

Following the Grayseal conversion kit for the Team Associated B44 buggy Azarashi now also have a respective kit for Kyosho’s ZX-5 SP2 buggy available. The set is developed around a new upper and lower carbon fibre chassis that makes use of a 2S shorty-type LiPo battery pack over the conventional 2S saddle packs for a lighter and better handling buggy. The longer 293mm wheelbase helps to calm down the vehicle without scrubbing corner speed or agility. The motor and speed controller are now located on the right side of the chassis opposite of the battery pack. Lighter components such as the steering servo and the receiver found a new home in the front of the buggy. Include in the set are the upper and lower chassis parts made from carbon fibre, a carbon battery strap, new servo mounts, longer centre driveshafts and hardware.

Click here to view more photos

August 7, 2013

Kyosho TF6 SP2 conversion kit

Kyosho Germany introduce the TF6 SP2 conversion kit. The set contains all necessary parts to bring the TF6 up to the latest SP2 specification to make for an even faster and better handling car. Included in the kit is a new 2mm upper deck, an upper plate post, hard front 6°C-hubs, hard rear hubs as well as steel gear diff shafts, cup joints, 42.5mm steel and 43mm aluminium swing shafts.

Source: Kyosho [kyosho.de]

August 7, 2013

Yaiba B4 & RB6 option parts packages

YaibaB4set

Yaiba Racing now offers special option parts packages for the Team Associated B4 and Kyosho RB6 buggy. Starting with the B4 Base Set, included are several red anodised and laser-etched aluminium parts such as big bore shock mounts, front kingpin brace, front bulkhead, steering bellcranks, battery trap thumb screws, rear chassis brace and a motor plate. The RB6 Complete set is available for mid and rear motor cars and includes steering bellcranks, a steering rack, the graphite battery plate set with alloy posts and thumb screws, RF and RR wide suspension mounts, the specific rear bulkheads and a motor plate. The packages are ideal for everyone wishing to upgrade without having to buy the parts separately. All three packages are available very soon.

Click here to view the RB6 packages