Red RC » OfficinaRC

January 19, 2023

OfficinaRC Smart Gluer Tool

OfficinaRC has released this Smart Gluer Tool for the 1:10 Onroad racer which is designed as a device that allows you to glue the shoulder of the tyre perfectly in the simplest way possible. Small in size and made from a solid aluminium block, the Smart Gluer Tool is made completely in Italy. Its exclusive design despite its small size allows it to accommodate a comfortable retractable support in the case which can be used to support the glue nozzle and allow perfect administration on the shoulder. The smart Gluer Tool is battery powered (not included) which allows it to be transported in the hold even for air travel. The use is very simple, place the rubber in the hexagonal adapter in the centre of the Smart Gluer Tool and tighten the rubber using a knob screw. Once powered on the rubber will start to rotate at the right speed to be able to apply the glue. To be even more precise you can use the “Glue Holder” which is housed in the case and which can be positioned using a screw in order to have greater precision in depositing the glue. The Smart Gluer Tool is supplied in a semi-rigid bag made exclusively by MonacoRC which contains a shaped foam to accommodate the device.

View more images here

November 18, 2022

OfficinaRC Titanium Skinny-UFS

OfficinaRC has released these new Titanium Skinny-UFS screws. They are made of titanium with the best precision machines by experts Italian craftsmen in order to create a product destined to become a reference for those who’s looking for the best experience. The attractive design and extreme technical characteristics project these screws to become the object of desire of those who’s looking for maximise any performances. Made one by one from titanium bars. These screws have a head of only 4.4mm wide and 0.9mm thick. Below the extremely thin head there’s a cylindrical part of 1.4mm that allows a perfect centring without preventing tightening. Particularly suitable for: To screw the new Xray XLP shock absorbers to shock towers where space is really limited. But also to fix parts by increasing their torsion and reducing the weight, even if only slightly. Ti-6Al4V is the most widely used titanium alloy in the motorsport and aerospace market. This alloy contains 6% aluminium and 4% vanadium. Is an excellent combination of endurance to efforts and toughness, with extra resistance to corrosion.

View screw measurements here

November 1, 2022

OfficinaRC X4’23 Billionaire, Bella Vita and Dolce Vita kits

World Champion brand OfficinaRC has released their Billionaire, Bella Vita and Dolce Vita kits for the new Xray X4 ’23. All the pieces of the kits are made in Italy with TiAl6V4 Titanium to ensure the best possible product on the market, making the work on the car much faster and more effective. The highest quality titanium used is practically indestructible ensuring endurance and reliability. The Billionaire kit offers the complete transformation of your X4 ’23 to titanium with the 34 piece Bella Vita kit a middle option and the 14 piece Dolce Vita kit covering the key ball studs.

Source: OfficinaRC [officinarc.com]

August 4, 2022

OfficinaRC Tungsten Smart Shims

OfficinaRC have added these new tungsten Smart Shims to their existing aluminium and brass Smart Shim offerings. Obsessed with quality and attention to detail, OfficinaRC say they have added the Tungsten version as a follow up to the successful introduction of the aluminium smart shim. OfficinaRC have applied a laser cut on the side of the shim in order that you can immediately recognise its size so you will no longer have any doubts and no longer need a caliper. The material used, tungsten, plays a fundamental role, increasing the weight by 8 time over the Alu Smart Shim so at the lowest point it can consequently lower the centre of gravity and make the car even more stable. Measurements are defined by solid lines with each line indicating millimetres. Offered as a pack of 8 shims they are available in 2 sizes: 3x6x1mm and 3x6x2mm. The Tungsten Smart shim are designed by OfficinaRC in Monaco and made in Italy.

Source: OfficinaRC [officinarc.com]

February 16, 2022

OfficinaRC smart shim kits

From OfficinaRC, these smart shim kits contain all the measurements needed to set up your model. Available in three variants, the kits are made up of ten pieces per size and are housed in a practical plastic box. Now you will no longer have any doubts about which size it is, at a glance you will be able to recognise the fitted size and, above all, you will no longer need a caliper. Measurements are defined by solid lines and segmented lines, the solid ones indicate millimetres and the segmented ones indicate half millimetres.

View the different sets here

December 14, 2021

OfficinaRC Tungsten Disco

OfficinaRC have introduced the Tungsten Disco. These tungsten discs increase weight and help balancing the car without compromising the flex of the chassis. They are made in 2 sizes, 7.5g and 15g, with their shape is designed to be stacked on top of each other in order to select the appropriate weight. There is an internal thread so they can be easily mounted and thanks to the material used, they are heavy yet take up half the space of weights made of other materials.

Source: OfficinaRC [officinarc.com]

December 6, 2021

OfficinaRC SFS strong flat screw

From OfficinaRC comes their new SFS line, which stands for Strong Flat Screw and is the new Grade 5 titanium screws line made entirely in Italy. Thanks to the high quality materials and the exceptional workmanship, this new line is destined to become a standard of excellence that will revolutionise the RC world. Machined from solid Grade 5 Titanium, these screws are the result of excellent Italian mechanical processing. The production chain is certainly one of the most expensive in the world but it is also what allows them to guarantee extremely high quality standards. If saving for you means paying less for a product, this is not for you. If, on the other hand, you are looking for products that are worth their cost and guarantee quality and long life, you are in the right place. Available in M3x5, M3x6, M3x8, M3x10 and M3x12 versions.

View the SFS line up here

November 30, 2021

OfficinaRC X4 brass 6mm pivot balls

From OfficinaRC for the Xray X4, these brass 6mm pivot balls are made in Italy with the best machinery and by expert craftsmen with many years of experience. The brass used, thanks to its characteristics, guarantees maximum sliding by minimising the friction of the pivot ball in the arm. The weight is very similar to that of the original versions.

Source: OfficinaRC [officinarc.com]