Following new wing trends, Italian bodyshell producer Mon-tech Racing has released this new wing combo for 1:10 Touring Car. Made using 0.75mm polycarbonate, both are new wings designs with one giving high load and one designed for medium load. While light at the same time they are rigid wings to be as efficient as possible giving you smoothness and stability. Coming complete with fixings the kit includes screws and black plastic washers.
Yokomo has two new options for its flagship MS1.0 1:10 Electric Touring Car in the form of a new caster measurement tool and new springs. The new caster measurement tool is attached to the steering block on the MS1.0 to facilitate caster measurement when measuring alignment when the new turnbuckle tuning part is in use. The tool allows you to check and adjust caster accurately. The new springs are softer than the MS1.0 standard springs. Available in 1.8 and 1.85, they are effective for outdoor asphalt surfaces where you want more traction with a combination of 1.80 in the front and 1.85 in the rear recommended.
Yokomo has added number of new parts for some of the buggies in its 1:10 Offroad range. For the SO series 2WD Buggy they hand an LC gearbox made from Graphite-mixed resin. Harder than standard gearbox, it provides increased rigidity of the rear area and on throttle there is less yawing and snagging, allowing for sharper cornering. Also for the SO is a Rear bulk cap and differential height adapter which also made of graphite-mixed resin increases stability around the rear. New SO series rear lower suspension arm feature a modified shape to make it more flexible and the wheelbase has been extended to increase the relative front load and achieve higher cornering speeds. They are available in standard type and graphite molding. For their YZ-870C, the buggy’s large-diameter 2.2-inch wheels are now available in a new white colour, allowing the use of current 2.2-inch size tires while retaining the YZ-870C’s distinctive wheel hubs, making it possible to choose the best tires from a varied lineup for a variety of surfaces. One new optional part for MO2.0 4WD Buggy is a replacement axle for front double-joint universal. Finally Yokomo are offer 5.5mm size rod end balls manufactured from titanium. Reducing weight at the tie rod and upper rod section, they are especially effective in improving steering response and dynamic performance on high-grip surfaces.
Blitz has updated its EK9 1:10th Bodyshell for FWD class with the release of the EK9-MK2. The original EK9 was developed in 2019 because the EFRA GBS body rules for FWD class applied but now they have fine-tuned it and made the EK9-MK2. The development of EK9- Mk2 bodyshell is based on the middle motor Front wheel driver chassis, the roof height of the Mk2 is low down 10mm, with the low profile design improving the airflow and increasing downforce, compared with EK9 the new Mk2 body can carry more corner speed, less traction roll, and much more stability. The EK9-Mk2 body included a light decal and window mask, the pre-mark body tower mounting location dots help the user easily find the right location to mount the body. 2 different thicknesses of EK9-Mk2 Bodyshell available, 0.7mm Standard and 0.5mm Light.
Revolution Design Racing Products has added a Clamping Servo Horn for all Team Associated 2WD vehicles like the B7, B6.4, T6.4, SC6.4, and the entire B6 series to its accessory line. These servo horns are made from black anodized 7075 aluminium and feature silver chamfers and a laser-etched RDRP logo, providing a sleek and professional appearance. The 25T version fits servos from Ruddog, Savöx, Protek, Reedy and many other servos, while the 23T version is suitable for Sanwa and JR servos. These servo horns offer a secure clamping mechanism and precise control for all demanding racing conditions.
Source: RDRP [revolution-rc.com]
In the latest product evolution from Ryan Maker’s RC Maker comes this blacked out Weighted Tweak Wheel Set Pro for 1:10 Touring Car. Featuring a more stylish updated design that also increases the usability, durability and accuracy of the tweak wheels. With longer thumb nuts for easier attachment, new chamfered nuts tighten down to hex without shims. It has a smaller range of motion once wheel lifts, for faster resetting with a one-piece weight/bulkhead design for increased rigidity and durability. A premium dual colour lock in base makes for easy transport. Made from RC Maker’s signature GeoCarbon, stylish chamfered, black coated and laser engraved brass give a high quality finished look.
Sworkz has introduced a tool bag for its latest line of tools offering it as a complete ready to go set with all the key Sworkz tools you need to maintain and repair your RC car. Containing a comprehensive selection of high quality tools specifically designed for competition RC cars, the robust bag guarantees durability. It also offers numerous compartments and holders to keep your tools perfectly organised and easily accessible. The lightweight and compact design of the bag and the easy handling of the tools make it ideal for using it on the go and on the race track.
New from Mugen Seiki is this Pin Replacement Tool for use with its MSB1 1:10 2WD Buggy. The Japanese manufacturer has produced the 2.5 Pin replacement tool following a lot of requested for the option. It is used to replace the φ2.5 pins used in the drive shaft of 1:10 electric buggies used by all brands with Mugen also offering replacement φ2.5×9 pins in a pack of 10 pieces.
