Red RC » Brand

July 5, 2024

Ermen joins Hasi Tuned engines

Hasi Tuned has announced that International 1:8 Nitro Onroad stalwart John Ermen has joined its team and will campaign their engines. The Dutch racer, and recently turned part time ENS race pundit, makes the switch to the engine brand fronted by leading Swiss nitro racer Silvio Hächler following a decade of racing for the Italy’s Reds Racing. One of nitro onroad racing stand out characters, commenting on the news, the ARC team driver said, ‘A new chapter in my RC career! Hasi Tuned!! First of all I would like to thank my previous sponsor for the past 10-years!!! Ten years is a long time to be part of a company and it was a decision not taken lightly. We have had a great and close cooperation in I’m grateful for! We book some good results together, on and off track with development and race results! But sometimes it’s just time for something new! I want to thank Sartor Matteo and Sartor Cristiano for this new opportunity! I’m looking forward to the time that is coming! My first race would be the 2nd ENS – Euro Nitro Series in MAV Aigen-Schlagl.’

Source: Hasi Tuned [hasituned.eu]

July 5, 2024

Capricorn LAB GT2 Shock Springs

Italian chassis manufacturer Capricorn has added two new shock spring options for its LAB GT2 1:8 GT chassis. A new Red spring is the softest of their spring table. A new Orange progressive spring, due to its behaviour, is placed between the standard Red and previously available Green option. Both can be used for front or rear and are suggested for use on a low grip track.

Source: Capricorn [capricornrc.com]

July 5, 2024

Awesomatix A12X & A12WC Pan Car kits

In an exciting week of news of new 1:12 cars, Awesomatix has just released not one but two new versions of its A12. The first of these, the A12WC, is a refined version of the previous A12 kit firstly introduced during the 2020 World Championship and recently crowned IFMAR Spec World Champion in the hands of Awesomatix’s team manager Max Mächler. The A12WC kit includes the proven A12 concept where the rear spring action is controlled by the flexing of the chassis itself assisted by a pair of coil side springs that also act as an additional rear spring. The chassis shape is new and has been refined to further enhance the flex distribution while also incorporating the rear brace. The second released, named A12X, brings its design slightly more towards traditional 12^th scale cars where side and rear spring actions are independent. This is achieved thanks to a built-in coil spring inside the rear damper and new side coil springs positioned at the very front of the chassis. The new steel chassis brings the CG even lower and allows for a narrower and sleeker shape to the whole design.

Continue reading here

July 3, 2024

Avid B7 Parts

American aftermarket parts producer Avid Racing Concepts has released a huge offering of parts for the Team Associated RC10B7 1:10 2WD Buggy platform. All direct replacement parts and finished in Avid’s signature black and silver style, this batch of parts not only adds style to your B7, but much needed strength. Included in it are a 7075-T6 Aluminium Motor Mount, a One-Piece Servo Mount, and a 0° Bulkhead with 4 tapped holes with set screws to remove any slop through wear. A new Rear Ball Stud Mount raises the ball stud +2mm so you don’t have to run as many ball stud washers, keeping your ball stud bent free. Their Arm Mount D HD is beefed up on the sides for extra strength. In addition to the visual parts, Avid are also offering a range of hardened hinge pins.

View more parts here

July 3, 2024

MXLR Xpress FlexBumper

In it latest FlexBumper release, Germany’s MXLR is now offering Xpress Touring Car owners the opportunity to run the 3D printed bumper. Produced using thermoplastic polyurethane for optimal strength and flexibility, the FlexBumper absorbs hits better and doesn’t transfer them as much into the chassis structure. More robust and sturdy, it always goes back to original shape and don’t drag on the floor after a crash. The MXLR FlexBumper for the AT1, AT1S, XQ1, XQ10, XQ10R, XQ11, XQ1S, XQ2S, XQ3S matches the original footprint, but with a lower overall profile! It’s a direct replacement for the kit foam. The lower overall profile helps to keep the weight in an acceptable range with it coming in at 9.8grams.

View more images here

July 2, 2024

Reds Racing Tetra-X Clutch System

REDS Racing has unveiled its latest innovation, the new Tetra-X™ Clutch System. This state-of-the-art clutch system has been meticulously engineered to provide superior performance, ease of use, and unmatched durability, ensuring that racers can achieve their best results on the track. One of the most significant advancements in the new clutch is its user-friendly design, the clutch also coming pre-assembled. Racers no longer need to rely on specific tools or complicated procedures to adjust the clutch and it can be easily assembled and set without any tools, allowing for quick and hassle-free setup. The new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions.

View more images here

July 2, 2024

MonTech CV-Series LMH 1:10 Bodyshell

Continuing to expand its offering of LMH 1:10 190mm bodies, MonTech Racing takes a leap forward with the arrival of the CV-Series bodyshell. The Italian company’s latest bodyshell is designed to fit both Touring Cars (190mm) and Formula 1 chassis with a 260mm wheelbase. Ffollowing the legacy of the LMH series, the CV-Series boasts exceptional precision, faithfully replicating a real car’s form and function. Constructed from premium polycarbonate, the it comes equipped with everything you need to hit the track immediately. Headlight decals, window masks, rear wing fixing screws, and aerodynamic fin screws are all included, ensuring a smooth and frustration-free setup process.

View more images here

July 2, 2024

Axon TC10/3 option parts

Axon has announced the introduction of four new option parts for it TC10/3 1:10 Electric Touring Car. The first of these is a 2.0mm aluminium Main Chassis. The alu chassis gives the perfect balance of moderate flex and chassis rigidity. Lightweight yet strong, the chassis improves stability and handling performance of the car. Also new for the car are Front Roll Posts. The roll rigidity of the entire top deck can be freely adjusted. Subtle chassis flex adjustment is possible by changing the mounting position of the post at the front and rear. This is a setting item that can respond to all kinds of road surface conditions. There is also a Rear Roll Post Type B that does not fasten the rear roll post to the top deck with screws, and allows natural chassis flex without losing chassis pitching rigidity and roll rigidity. Combined with the front roll post, it provides a higher level of mechanical grip. Finally the Japan manufacturer has added 6mm ball bushing O-rings. These O-rings secure the 6mm ball bushings for the TC10/3 front and rear lower suspension arms, replacing C-clips and improving road gap travel for a smoother ride.

View more images here