Red RC » Brand

November 8, 2017

Aerox Cougar KC/KD buggy body shell

UK Aerox distributor Schumacher has introduced a new body shell for the Cougar KC/KD 2WD buggy. The body is designed to improve the aero package of the Cougar KD and particularly KC models. It has a super sleek design, is 13 grams lighter than a standard kit body which greatly reduces the centre of gravity and the chances of traction roll on high grip surfaces. Michal Orlowski used it to great effect at the recent EOS in Poland claiming 4th place from 3rd on the grid and he says: “The new Aerox bodyshell feels great to drive. Car is more agile and rolls round less so it makes you feel more confident. That makes you faster on the track. And it looks awesome too!” The body is supplied in crystal clear polycarbonate with over-spray film, window masks and decal sheet.

View more images here

November 8, 2017

T-Works D817 & RGT8 graphite radio tray support mount

T-Works have introduced their new graphite radio tray support mount for the HB Racing D817, D817T and RGT8 kits. The set includes a complex radio tray stiffener machined from carbon fibre that braces the steering and throttle servo area while also reinforcing the receiver and receiver battery box. An additional lower brace further stiffens up the assembly. Included in kit is also a machined aluminium bushing and gold-anodised hardware.

View more images here

November 8, 2017

RC Maker offroad digital camber & toe gauges

The latest in the line of RC Maker’s digital camber and toe gauges are two variants for 1/10th and 1/8th EP and GP off-road cars. They comprise of two different versions, one for 1/10th EP 2WD and 4WD buggies, and one for 1/8th EP and GP buggies and trucks. This allows to digitally measure the camber, camber gain and toe on all off-road vehicles. Consisting of an aluminium and carbon fibre construction, they are built to very tight tolerances accurate to within 0.01 degrees over a 4-degree range. This ensures precise and replicable camber and toe. The gauge itself features a backlit screen with big numbers for easy viewing in day and night, as well as “auto off” and “zero” functions to be able to zero to the setup board surface no matter what angle it is on. The gauge also features very easily replaceable AAA batteries and comes with a velvet storage pouch to keep it looking and functioning like new.

View more images here

November 7, 2017

JConcepts rubber parts tray

JConcepts have introduced their new rubber parts tray. The tray provides a platform for organisation with its detailed design, divided pockets and steady base weight. The tray is precision-moulded in a rubber material which shows well in any pit area with the available blue and black colour options. The grippy nature of the rubber allows the parts to stay rooted where they are placed. The tray has six, built-in positions to place a differential for builds or fluid fills and can accommodate 1/10th and 1/8th sized assemblies. The iconic Dirt-Web tread pattern is raised into the surface of the largest cubicle and JConcepts.net logos blaze the outer perimeter.

View another image here

November 7, 2017

Leadfinger Racing pre-cut Tactic 1/10th buggy rear wing

Leadfinger Racing have introduced their newly redesigned Tactic 1/10th off-road rear wing and stabiliser. The wing has a widened centre section to easily fit many popular platforms, and is specifically designed for a variety of today’s track surfaces; from indoor turf to outdoor clay. The vented design allows the wing to be left uncut for increased rear traction when needed; or can be cut out, allowing passing air to escape for higher traction conditions such as blue groove clay and turf tracks. When reaming multiple holes was the only option, the new performance enhancement of the Tactic wing allows for more precise tuning without the sacrifice of durability. Two pre-cut wings come per package.

Continue reading here

November 7, 2017

Xray RX8 30T aluminium front/side belt pulley

Xray have added a 30T aluminium front/side pulley to their line of option parts for the RX8 1/8th on-road kit. Machined from Swiss 7075-T6 aluminium and coming hard-anodised for wear, the 30T pulley will improve rear traction and steering in high-speed corners and it adds to the existing line of Xray’s RX8 aluminium and composite drivetrain pulleys.

Source: Xray [teamxray.com]

November 7, 2017

Kyosho Mad/FO-XX series 5-link conversion kit

Kyosho have introduced a 5-link conversion kit for the Mad and FO-XX series of off-road trucks. The set contains all needed parts to convert the truck to 5-link specification while also including a 4WD rear steering system and front and rear stabilisers. The set is usable on the Mad Force Kruiser 2.0, FO-XX and the Mad Crusher, however the latter already comes equipped with a 5-link setup. In addition the 4WD conversion and stabiliser sets are also available separately to outfit the EP and GP Mad Force Kruiser 2.0, FO-XX and Mad Crusher trucks.

View the other new parts here

November 7, 2017

BMT 984 & 701 hard-coated aluminium pivot balls

BMT from Italy have introduced a set of hard-coated aluminium pivot balls for the front suspension of the 984 and 701 kits. The parts are precisely machined from high-quality aluminium, they come hard-anodised for wear and a smooth surface and at 1.3g they weigh in at only 1/3 of the mass of the standard steel balls.

Source: BMT [bmt-team.com]