Red RC » Brand

October 11, 2017

Picco V1 .21 Team Robert Batlle Edition engine

Picco have introduced their new V1 Team Robert Batlle Edition .21 nitro off-road engine. Born to commemorate the victory of the 2017 EFRA 1/8th Buggy European Championship, the engine sports advanced features such as a DLC-treated crankshaft, and a rear ceramic bearing. The low centre of gravity cooling head features a different colour scheme and is a tribute to European Champion Robert Batlle, while the 5-port cylinder sports an updated exhaust timing to achieve more response in the low to mid RPM range. The engine package is rounded out by a 2099 performance exhaust kit that features a front pressure nozzle in order to optimise fuel consumption and tuning.

Source: Picco [teampicco.com]

October 11, 2017

Rusti Design chassis protector decals

French brand Rusti Design have introduced their new chassis protector decals. Sporting flashy Rusti Design graphics the pre-cut decals are available in eight different colour variants and for a huge range of brands and cars – including on-road, off-road and some vintage kits. Using the protractor skins will ensure a longer chassis plate life in abrasive track conditions and cooler looks when the car is upside down.

View the colour variants here

October 11, 2017

Muchmore 4.0mm hard chrome turnbuckle wrench II

Coming from Muchmore is their new 4.0mm hard chrome turnbuckle wrench II. The tool features a hard chrome-plated tip that ensures a long life and low stress to all parts involved while the engraved, black-coated handle makes for easy identification. The wrench has a total length of 54mm, making it compact and easy to carry.

Source: Muchmore [muchmoreracing.net]

October 11, 2017

RC Maker long reach touring car ride height gauge

New from RC Maker is a simplified ride height gauge for touring cars with longer platforms. Outdoor racing with carbon chassis can lead to excessive chassis wear in the exact spots which drivers measure the ride height from. The increased 20mm length of the platforms allows the gauge to reach a more inner, unworn part of the chassis. This gives a much more accurate reading on the ride height, noting the difference between measurements can be from 0.2mm – 1mm depending on how worn the chassis is. The gauge of six platforms ranging from 5mm to 6mm in 0.2mm increments suits all racing conditions with fine tunability. It features a lightweight 7075 aluminium construction with black anodising and white laser etched numbers and logo.

View another image here

October 10, 2017

Capricorn C803 front differential

Capricorn have introduced a front differential set for their C803 1/8th scale car. Intended for the use in low-grip conditions, using a front differential gives a different on-track feeling and allows for 4-wheel braking while also making the car easier to drive. When used with a 30T front pulley the suggested diameter delta between rear and front wheels is 6mm instead of the usual 7mm, whereas when using a 29T pulley the delta should be brought down to 4.5mm.

Source: Capricorn [capricornrc.com]

October 10, 2017

Arrma Senton & Granite 1/10th 4×4 RTR trucks

Arrma have introduced their all-new Senton and Granite 1/10th 4×4 Mega ready-to-run trucks. Both utilise the same full-time 4WD transmission and chassis and the vehicles feature sturdy front and rear differentials, telescopic driveshafts and a slipper clutch to get the power to the ground. Large volume composite plastic shock absorbers soak up all of the terrain’s imperfections while raised chassis side rails keep dust, dirt and moisture away from the servo, receiver and steering servo. The packages are rounded off by 2.4GHz radio systems, wall chargers, 8.4V NiMH batteries and 15T brushed motors. The Senton comes with a short course truck body and grippy SC tyres while the Granite shows off a monster truck body and MT-style tyres and wheels.

View more images here

October 10, 2017

Raceform Lazer 1/10th buggy tyre gluing jig

Raceform’s Lazer buggy tyre gluing jig is now also available in a variant for 1/10th buggy dirt tyres. Compact and light of weight, the jig features a clincher roller that peels off the tyre bead while automatically aligning the bead after applying the glue and further rotating the tyre. The overall design makes for extremely convenient operation while an anti-slip under site allows for a secure stand on the pit table or workbench. An anti see-saw effect fastener knob keeps the wheel flat to the disc during gluing the inside portion of the tyre. The smart design greatly reduces rotation, making the process even faster. The tool is machined from high-quality plexiglas, it takes all standard 1/10th off-road rims and dirt tyres and comes with various stacker discs to adjust the deck height for all tyres of wheels, as well as two angled needle applicators and a decal sheet.

content

October 10, 2017

Brilliant RC pit trolley

Coming from Brilliant RC is their all-new pit trolley. Designed for 1/10th and 1/8th on-road cars and with a total size of 640x350x570mm it offers reinforced areas for high durability while the large upper drawer has a size of 500x300x210mm which is enough to take a race-ready 1/8 nitro on-road car with body. Four equal-sized inner drawers with a size of 245x300x125mm and two outer pockets with zippers are usable to carry accessories and spares while a large outer pocket allows to carry setup boards up to 500x500mm in size. Other features include ball-raced wheels, a 30mm plastic foot lifts the trolley by 30mm for more convenient use and the washable outer skin ensures the trolley will look good for a long time. The features list is rounded out by an ergonomic heavy-duty carrying handle.

View more images here