November 8, 2024

VP-Pro Upgraded Clutch Set

VP-Pro has released this upgraded Clutch Set.  Keeping the same philosophy of making a high-performance mounted clutch, the aluminium shoes have been redesigned, improving performance, durability and preventing it from wearing the spring and causing possible spring breakage due to friction.  The springs have also been redesigned to adapt it to the new shoes and avoid possible breakage.  The 0.9mm/1.0mm/1.1mm springs are available to choose as an optional part, to best suit your driving style and track conditions.  VP Pro also offer the clutch with a disassemble tool.

View more images here

November 7, 2024

Coelho opens World title defence with Q1 TQ

Reigning World Champion Bruno Coelho has opened his Electric Touring Car World Championship title defence with a TQ run in the opening round of qualifying at Finishline RC Raceway in California.  Having set the pace in yesterday’s free practice, the Xray driver carried that form into the opening two seeding rounds but in SP3 a traction roll would mean he would be the fifth car to leave the line in Q1 as arch rival Michal Orlowski got to go first.  With the sun setting in Bakersfield, and temperatures dropping as the top heats went out on track, Q1 conditions would challenge all the drivers but chasing a third consecutive title it was Coelho who came out on top.  Ahead of him on the track but behind him on the time sheets Orlowski’s Schumacher would stop the clock 1.3-seconds off Coelho.  A further 1.7-seconds back Akio Sobue completed the the Top 3 for the first of the six rounds followed by Ronald Volker, Marc Rheinard and Alexander Hagberg.

Continue reading here

November 7, 2024

Infinity IFB8 Lightweight optionals

Infinity has released two lightweight optionals for their IFB8 1:8 Nitro Buggy.  Machined from 7075-T6 alloy and featuring a hard coating, the CVA Cup Shaft lightweight design make them 4.3 grams compared to the steel version’s 8.3 grams allowing you to save weight and achieve maximum performance.  It can also be installed on the rear hub providing additional support, which is recommended for high-grip and fast tracks.  Also made from 7075-T6 alloy, lightweight Diff Cross Shafts each weigh 0.65 grams allowing you to cut weight from your transmission and achieve maximum performance.  It can be installed on all the differentials of your vehicle.

View Diff Cross Shafts here

November 7, 2024

Coelho tops opening seeding round in Bakersfield

As things start to get official here at the IFMAR ISTC World Championships in Bakersfield, California, it was Bruno Coelho who set the pace in the first of the 3 seeding rounds, the reigning World Champion’s closest challenger continuing to be Michal Orlowski.  With yesterday’s wind having died down and the morning sun bringing some extra temperature, drivers posted their fastest laps of the event so far around the Finishline RC Raceway with Coelho’s advantage over 3-consecutive laps 1/10th of a second on Orlowski.  Behind them it was Warm-up Race winner Akio Sobue who was 3rd fastest ahead of Marc Rheinard with Infinity’s Jin Sawada and Schumacher’s Mattia Collina completing the Top 6.

Continue reading here

November 7, 2024

SMJ Revolution Ultra Bearing Lubricant

New from Japan’s SMJ, ‘Revolution’ bearing lubes were developed to achieve the ultimate in low friction. By using it on degreased bearings, you will experience unprecedented lightness of rotation.  Recommended not only for RC cars but also for mini 4WD.  The bottle’s steel applicator tip ensures precision application of the oil.

Source: SMJ [smj-rc.com]

November 7, 2024

Willspeed LD3 30T PEEK Idler Gear

Following on from the release of their PEEK idler gears for the Team Associated B7, 1:10 offroad specialist manufacturer Willspeed has released this machined 30T PEEK Idler Gear for the Schumacher LD3 2WD Buggy.  PEEK (polyetheretherketone) is a premium high performance engineering plastic and boasts excellent mechanical strength, heat and wear resistance and bearing properties, the highest rated among plastics making these gears truly a fit and forget item.

Source: Willspeed [willspeed.co.uk]

November 7, 2024

Ronnefalk confirmed for SIGP International Offroad GP

The organisers of the SIGP International Offroad GP in Xiamen, China, have announced David Ronnefalk as the latest driver who will compete for a share of the race’s total prize money of almost $25,000.  The Xray driver & 2016 1:8 Buggy World Champion is the third World Champion winner to be confirmed for the December 11-15 race with Team Associated’s Davide Ongaro and Xray’s Bruno Coelho having already been announced to race at the 3-circle ARC International RC Racing Track.  The same venue that hosted the 2017 IFMAR 1:10 Electric Offroad World Championships, the race schedule will be made up of 5 classes including racing for 1:4 offroad bikes with the main action expected in 1:8 Nitro Buggy and 1:8 eBuggy.  Red RC will be travelling to the SIGP for the post Covid return of the event to the international race calendar.

Source: Sunpadow [sunpadow.com]

November 5, 2024

Mugen brings new MTC3 to World Championship

Mugen Seiki has brought two of its all new MTC3 1:10 Electric Touring Cars to the IFMAR World Championship which gets underway tomorrow (Wednesday) with the first day of track action.  The very close to final production prototypes will be raced by former World Champion Ronald Volker and top US racer Jacob Cruz, both drivers getting their very first feel for the car on asphalt when they joined a number of other manufacturers for a final shakedown over the weekend at the Exeter RC Speedway, that track about a one hour drive from the WC venue.  While the Japanese manufacturer is currently working on the planning of parts production for the new car, the MTC3’s designer Robert Pietsch, who has travelled out to California with Volker, says that no release date has yet been set for the car adding that from a design aspect what they are racing is very close to the final product.  Making the decision to not yet allow any detailed photograph of the cars as it looks to keep the design under wraps, speaking to Volker during today’s registration and tyre prep day here at Finishline RC Raceway here in Bakersfield, the German said the new car is a big step forward, the new design bringing the car in line with the latest design trends in the category.  Having had four bodies painted in his trademark colours for the World Championship, unfortunately we wont be seeing much of Volker’s MTC3 in his scheme as the bodies failed to arrive in time for his departure to the US.

Mibosport
VP Racing
T-Works