Red RC » Brand

September 14, 2017

3DRC Anti-Tuck body stiffeners

Available now from 3DRC are anti-tuck body stiffeners for on-road body shells. 3-D-printed from tough yet flexible and lightweight material the braces are of a simple design and they are installed in the rear part of the body to prevent unwanted, time-robbing and race-destroying body tucks – a phenomenon that sees the rear part of the body/rear fender getting deformed in an impact and caught by the rear wheels, which will ultimately make the car unmaneuverable. The set includes two anti-tuck braces, installing requires four M3x5mm button head screws and the parts are usable on 1/10th 190mm and 200mm bodies alike.

View another image here

September 14, 2017

RC Prostyle MTC1 carbon battery mount & fan mounts

RC Prostyle have introduced first option parts for Mugen’s brand new MTC1 1/10th electric touring car in the form of carbon fibre battery mounts and fan mounts made from the same material. Starting with the battery retainers, the set includes front and rear battery brackets machined from carbon fibre to replace the standard moulded composite parts while also utilising a tape-less mounting system using carbon fibre plates. The set is a direct replacement for the standard parts and it not only speed up battery swaps but also does away with tweak issues associated with using fibre reinforced tape to strap the battery down. Also new and made as a direct fit for the MTC1 are carbon fibre motor fan mounts. Available for 30mm and 40mm fans the braces attach directly to the layshaft mount, making for a floating and thus tweak-free design.

View more images here

September 14, 2017

Absima Paintz Matt spray clear coat

German company Absima have introduced their new Paintz Matt matte spray clear coat. Two or three layers of this matte coat, that is supplied in 150ml spray cans, applied to the outside of polycarbonate body shells will create the sought-after matte finish look and thanks to being fuel-resistant it is also usable for the body shells of nitro models.

Source: Absima [absima.com]

September 14, 2017

WRC LM16 1.2 1/10th LMP pan car kit

Coming from WRC Racing is their new LM16 1.2 1/10th 200mm pan car kit. The car was developed for the use with 200mm LMP body shells and formula class rubber tyres and it features a redesigned battery compartment that allows to use both inline and transversal battery positions while the rear suspension assembly was improved to give increased suspension travel which will lead to greater side bite and thus faster lap times. Last but not least come reinforced front lower arms that are now more crash-resistant.

View another image here

September 14, 2017

Losi 1/8 LST 3XL-E 4WD RTR monster truck

Losi have introduced their new LST 3XL-E 1/8th scale electric 4WD ready-to-run monster truck. Designed for the use with 6S LiPo battery packs the latest incarnation of Losi’s popular LST platform is capable of speeds of up to 80km/h while the Active Vehicle Control system ensures full vehicle control at all times. The truck is equipped with a full-time 4WD system with LSD centre differential and driveshafts with spring-retained couplers while ultra high capacity shocks with threaded alloy bodies and 5mm shock shafts soak up any bumps and jumps. Other features include sturdy 17mm wheel hexes, an optional wheelie bar, as well as spacious battery compartments that allow to use dual battery setups as chassis-mounted battery connectors ensure high reliability and safety. The truck is powered by a Dynamite Fuze 2200kv brushless motor with integrated cooling fins, and waterproof components make for go-everywhere capabilities. The package is rounded out by a Spektrum S904 1/6th scale digital servo and Spektrum’s DX2E Active transmitter, the latter can be equipped with optional telemetry features. Last bit not least comes a pre-painted body shell with flip top body mount. The truck is set for a release in November.

View the features and more images here

September 14, 2017

Exotek B64 Flite stock racing centre spool set

Exotek have introduced the Flite 75T centre spool set for the Team Associated B64 buggy. The ultra lightweight centre spool greatly reduces the rotating mass of the B64 for that extra boost in 13.5T and 17.5T blinky spec racing. The set weighs 18g with the spur gear whereas the stock diff weighs in at 42g in total. A machined 75T POM spur gear is included and bolts on to the lightweight alloy spool. Included also are coated steel outdrive cups for long lasting wear and are machined to accept the stock steel B64 centre bones or the super light weight MIP puck bone system for the B64.

View more images here

September 14, 2017

Maclan Racing MRR Team Edition V2 motor

Coming from Maclan Racing is the new MRR Team Edition V2 brushless motor. The newly-developed power plant was designed with the latest stock racing rules in mind and it features an all-new design stator, sensor unit, motor case, and realigned rotor and sensor position for maximum performance. The motor will become available in 13.5T, 17.5T and 21.5T variants, it weighs in at a lightweight 150g, is 100-percent hand-built and will hit stores in late September.

View the features here

September 13, 2017

Avid B6 flat front & long rear carbon fibre shock towers

Avid have introduced new front and rear carbon fibre shock towers for the Team Associated B6 series of buggies. Available are the “flat” front and “long” rear towers, both are made of 4.5mm carbon fibre material and Avid added material, pocketing, and bracing to the weak areas. The flat and long configurations are the most popular on dirt tracks and they require flat front A-arms and long 31mm shock bodies as the latter offer more volume and control in most conditions. The upper shock mount positions are in the same location as the stock geometry and the towers are available separately from now on.

View more images here