Red RC » Brand

June 14, 2017

Xray XB2 & XT2 narrow brass rear suspension mounts

Coming from Xray and made for the XB2 and XT2 kits are narrow brass rear suspension mounts. The narrow design increased the vehicle’s rear chassis roll which can be beneficial to find more traction on low grip surfaces. The added weight of the machined brass parts further adds stability and traction and the parts use the original I.S.S. suspension inserts for quick and easy suspension geometry changes. The suspension hangers are available separately as RF and RR parts.

View the RF mount here

June 14, 2017

Redcat Racing Shredder & Landslide RTR trucks

Redcat Racing have introduced the new 1/6th scale Shredder and 1/8th scale Landslide XTE ready-to-run monster trucks. Starting with the Shredder large scale electric truck, the kit is back after a two year hiatus and it has been update to increase performance and durability. The new version has bigger tyres, bigger shocks, and many other enhancements to make it stronger and more competitive than ever before. The 670mm long truck comes factory assembled and including an 80A Ezrun brushless system and a 2.4GHz radio. Not included are the necessary LiPo batteries and charger.

Continue reading here

June 14, 2017

West Coast R/C Works servo setup tools

West Coast R/C Works have announced their new product line of servo setup tools for touring and pan cars. The tools are designed to offer much greater accuracy when aligning the car’s servo horn or servo saver compared to the standard “eye balling” method. The 1/8 and 1/10 servo straight edge and pan car servo straight edge tools work together with a protractor or other measuring tools to set the correct servo trim resulting in an increased repeatability of this process. Drivers can also prepare several servos for one R/C car to be used during fast repairs at big events without having to worry that the servo trim needs to be reset. The pan car servo setup system is composed of two pan car servo centring tools and one servo straight edge. The servo setup system contains all necessary parts to install the servo in the centre and set the desired angle, which improves the repeatability of this process.

View more images here

June 14, 2017

Serpent Spyder SRX2 MHT Team 2WD buggy kit

Coming from Serpent is the Spyder SRX2 MHT Team 2WD buggy kit. The buggy was designed to excel on medium to high traction surfaces such as carpet, astro turf and prepped clay and it features a 7075 T6 aluminium main chassis plate with separate aluminium front kick-up plate, it utilises carbon fibre front and rear shock towers and a 3-gear laydown transmission. Also included are a high-torque ball differential, 3-pad slipper clutch and a cab forward body shell. The shock absorbers are of a big-bore 12mm design with hard-anodised bodies and caps and the kit can be equipped with optional 3-gear stand-up, 4-gear stand-up or 4-gear laydown gearboxes with all needed mounting holes already existing in the kit chassis plate. The Team edition kit will hit stores very soon.

View the features and more images here

June 14, 2017

SMJ Kabuto tuned buggy & on-road exhaust sets

Speedmaster Japan have introduced two new exhaust sets for 1/8th off-road and on-road applications in the form of the SMJ Kabuto tuned silencer sets. Starting with the off-road specific exhaust, the silencer is based on the T2060 SC pipe and it was designed to match perfectly with the Kabuto XB2 engine. It is usable for buggy and truggy racing and comes including manifold, gaskets and mounting springs. Also new is an on-road specific set based off of the T2080 SC exhaust. It will match the Kabuto R21 engine and just like the off-road set contains a suitable manifold, gaskets and springs. Both sets are EFRA homologated and they will hit stores soon.

View more images here

June 14, 2017

JConcepts B6 & B6D aluminium shim sets

More new items from JConcepts for the B6 and B6D with the release of a new range of aluminium shim sets. The all aluminium machined and blue anodised components offer benefits not yet available. First, the front suspension set to alter the front roll-centre includes a .5mm and 1mm shim to give racers that all important dual option. The second option is to help when running lower ride-height such as on carpet where 15 and 16mm is very common place. Offroad vehicles are not exactly built to race with excessively low ride-height and special accommodations are being made to allow higher levels of performance. JConcepts now offers the 1mm and 2mm shim kit for the B6 vehicle which can raise the entire transmission of the vehicle to allow a more advantageous drive-shaft angle. As a driver lowers the ride-height, the bone angle drops significantly on the inside of the vehicle, compromising drive-line geometry and efficiency. These shims are sandwiched in-between suspension components and aluminium isn’t as likely to deform under load or screw force

View the other shim set here

June 13, 2017

Serpent 4X vertical top-deck option

New for the Serpent 4X comes this double vertical top-deck and top-deck stiffeners. The new top-deck is the base for all the new flex options and it consists of two equal shaped vertical oriented 2.5mm carbon fibre plates. The plates are connected to the front and rear suspension with a machined aluminium adaptor plate and unlike flat top-decks, the vertical oriented double top-deck still allows for a lot of linear torsional flex, but basically eliminates any longitudinal tweaking and reduces torsional tweak drastically. It can be run in addition to the kit aluminium centre stiffener. The H-shaped stiffener plate can be removed when the top-deck is used to create more flex in the front and rear section of the car. To stiffen up the assembly further, there are two top-deck stiffeners available which connect the vertical double top-deck to the centre stiffener/motor mount assembly. Both can be used individually, to tune front and rear flex individually.

Source: Serpent [serpent.com]

June 13, 2017

Muchmore Racing Fleta ZX V2 motor

Muchmore Racing have introduced the Fleta ZX V2, a brand new motor that guarantees maximum power and efficiency. Featuring a heavily machined can, the Flow-Max 2 Cooling System allows for superior cooling, enhancing the cooling efficiency by 15% in comparison to their previous motors, which is great achievement in terms of keeping the motor performance as high as possible. In addition, the High Power new stator design approach doesn’t use a separate insulator, therefore having less weight and further improved cooling as well as very low internal resistance in exchange for surprisingly high output power. The ZX V2 motor also incorporates ‘maximum low resistance copper wire’ that allows low internal resistance which results in large power output increase.

View another image of the motor here