Red RC » Brand

March 26, 2015

JConcepts Finnisher 1/10th Car Stand

JConcepts unveils the latest car stand specifically for the prestigious Reedy Race of Champions. The design team focused on several aspects to debut a new treat during the large event. First, size was a focus and a lower stance was built into the design to accommodate 1/10th vehicles more specifically. The hex shaped design was inspired from the popular locking wheel nuts and Finnisher style wing buttons used within the JConcepts accessory line-up. Side pockets were incorporated as catch-all compartments for body clips, wheel nuts or any small item that is routinely changed during a race event. Cushion pads are positioned at the hex tips to provide support all the way to the edges on any platform vehicle while the large centre pads prevent normal slippage. As a bonus, JConcepts has included a rubber plug option with the company’s logo branded into the surface. To install, simply cut, moto-sand or ream on the pre-defined line in the centre area and remove to expose a large hole. Plug in the rubber piece as a grommet type installation and the look of the stand becomes even more custom. JConcepts has included a decal wrap for maximum exposure and presence that resembles the popular chassis tape Striker theme.

Source: JConcepts [jconcepts.net]

March 26, 2015

Robert Krens joins Shepherd Benelux

After years of close cooperation of Shepherd Benelux with Robert Krens as setup specialist and pit-crew for several Shepherd drivers, the company now welcomes him to their 1/10th scale nitro team. Robert will compete at the Dutch 1/10th nationals this season and he had the following to say:

After racing EC1:12 and EC1:10 for several years, I’ve always been looking for new challenges to improve my knowledge and skills. I’m very glad that Shepherd Benelux offered me to be part of the team and gives me this opportunity. I have seen the quality of their products from helping fellow IC1:8 racers during Nationals and was impressed by the quality and performance of Shepherd products. I’m feeling really confident and exited to start the new season.

Source: Shepherd [team-shepherd.nl]

March 26, 2015

Team C TC02C Evo rear bulkhead & alloy servo washers

Team C Racing introduce an aluminium rear shock tower mount for the TC02C Evo buggy as well as aluminium servo washers for general usage. Starting with the rear shock tower mount, the part is CNC-machined from aluminium and it replaces the standard composite part for a more durable one. The part offers improved support for the shock tower and it prevents the camber link ball studs from becoming ripped-out on impacts. The bulkhead sports mounting positions for the rear swaybar and it comes orange anodised to match the remainder of the car’s alloy options. Also new are 4.3mm aluminium servo washers whose design allows them to interlock with the servo’s mounting lashes to ensure a rock-solid installation as the servo cannot move in any direction even in harsh racing situations. The aluminium washers come orange anodised, in sets of four and they fit most standard-size and low-profile servos.

Click here to view the servo washers

March 25, 2015

JConcepts Mono & Bullet disc wheels

JConcepts introduce the new Mono wheels for the front of the TLR 22-4 buggy as well as the Bullet 4.0″ 1/8th truck wheels. Starting with the 1/10th wheels, they are designed in the popular dish style and available in bright white and fluorescent yellow. They offer the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shape and inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. The wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

Click here to continue reading

March 25, 2015

WRC GTX brass engine mount & battery support

WRC have new option parts available for the GTX 1/8th on-road car in the form of brass engine mount blocks and a battery support plate, made from the same material. Starting with the engine mounts, the 2-piece set is made from solid brass and it comes weight matched to a total of 65g. The blocks help to fine-tune the chassis’s weight balance as does the second new part, the brass battery support. The plate is a direct replacement for the stock part, it offers recessions for the battery tape and it weighs in at 46g.

Click here to view the battery support

March 25, 2015

DE SpeedLine Plus 2.4 1/10th buggy wheels

The SpeedLine Plus 2.4 is the latest 1/10th buggy wheel from DE Racing. Offering a 2.4″ diameter, for the use with the latest generation of 1/10th buggy tyres, the wheel delivers maximum corner control and stability by utilising DE Racing’s “Sure Lock” foam retention system. This system, comprising of radial ribs that lock the wheel and foam insert together, retains maximum tyre traction to the racing surface while eliminating the vague inconsistencies that come from an insert that is free to move around on its wheel. The rims are available for Team Associated, Kyosho and TLR 1/10th buggies and in white, yellow or black colour.

Click here to view more photos

March 25, 2015

Ryan Maifield teams up with TKO

TKO have announced that Team Losi Racing’s Ryan Maifield has joined their team. TKO products, such as wheel, clutch and engine bearings will be in his race cars and with the rolling out of TKO’s new electric performance product line Ryan will also help with testing and development. Currently Ryan is running TKO products such as ceramic engine bearings, flat & finished diff rings, special RT clutch bearings and wheel bearings, Eureka gear box lube, and Enhanced Rotation bearing lube with more to come.

Source: TKO [tkocompetitiondev.com]

March 25, 2015

Dennis Sting joins Xray

Xray have announced the signing of young and talented multiple German Junior Champion Dennis Sting to their team. Dennis is focused for nitro on-road racing and will race at all major events including the Euros, the ENS and the German Nationals in 2015 using Xray’s RX8 and NT1 kits. Dennis had the following to say:

I am very happy and excited for this great opportunity and want to thanks to Xray for their trust in me. To be part of World Championship winning team is a great honor for me and I will do my best to represent Xray in the best possible way. I will be racing all the major nitro on-road races as well the ENS series and will be available to anyone to help out.

Source: Xray [teamxray.com]