Red RC » Brand

July 28, 2014

SpeedMerchant World GT4 200mm pan car kit

SpeedMerchant have released first images of the World GT4 200mm pan car kit. The vehicle is based off the forthcoming RoadKill 10 235mm kit and offers a slim carbon fibre main chassis that can take 2S standard, 2S shorty or 1S LiPo battery packs. A new-style easy-to-adjust front suspension is also part of the package as is a class-standard link-type rear suspension with dual roll dampers. The side springs act on the lower power pod plate rather than on the sidelinks for improved precision and better adjustability while a lightweight motor pod makes for a good balance between low weight and rigidity. We bring you more details on the kit as soon as they become available.

Click here to view another photo

July 28, 2014

Team C TC10 carbon fibre bumper support

Team C introduce another option part for the TC10 touring car kit in the form of this carbon fibre bumper support. Machined from 2mm carbon fibre the bumper support is made to replace the stock composite plate with a more sturdy and cooler looking part. It also offers improved support for the front body mounts for better aerodynamics in corners and on the high-speed parts of the track. It is understood that the bumper support comes as a set including two orange anodised aluminium posts to connect the upper plate with the lower bumper plate.

Click here to view a photo of the parts in place

July 28, 2014

GForce Wi-Fi Link module for TS series controllers

Made for the use with GForce’s TS120A, TS90A and 1S120A speed controllers is the the Japanese manufacturer’s new Wi-Fi Link module. The device allows to adjust the speed controller’s software parameters using an iOS or Android-based mobile device. Plugged into the programming port of the ESC and mated with your mobile device the module is used in place of the standard programming box for a more convenient adjustment of the various throttle, boost and brake parameters.

Click here to view another photo

July 26, 2014

Team C TC02C Evo conversion kit

Following the announcement of the new TC02C Evo 2WD buggy kit, Team C will soon also have a conversion kit for non-Evo TC02C’s available. The set includes a new longer composite chassis, a new transmission case, gear differential, a milled aluminium motor plate, battery plate and several other parts such as a new rear shock tower and bulkhead, to bring the standard buggy to full Evo specifications. The conversion kit is rounded out by a new bodyshell but it lacks the rear anti-roll bar that comes with the full-blown kit.

Source: Team C [teamcracing.net]

July 26, 2014

Stefan Scheuenpflug re-signs with LRP

LRP announce that German frontrunner Stefan Scheuenplug has renewed his contract to run LRP’s brushless motors and speed controllers as well as nitro fuel, receiver batteries and accessories in the 2014 season and beyond. The package will be rounded out by Sanwa’s M12 radio system.

Source: LRP [lrp.cc]

July 25, 2014

Smokem Racing T4’14-IIX chassis

Smokem Racing T4'14-IIX chassis

Smokem Racing has taken their proprietary “pro-weave” 100 percent carbon fiber construction and married it to a contoured design to produce the T4’14-IIX chassis for the Xray T4’14 electric touring car. This specially developed 2.0mm thick chassis material is stiffer than conventional weave but softer than a quasi weave. This unique combination of increased flex and lower centre of gravity generates improved corner speed over a wider range of track conditions and temperatures. Through extensive development and testing, Smokem has managed to improve the high speed steering and transitional response with the T4’14-IIX design. Furthermore, the differential and spur gear openings have been closed off to further enhance flex characteristics and improve airflow on the bottom of the chassis.

Click here to view another photo

July 25, 2014

Yeah Racing Sprint 2 aluminium & steel option parts

Yeah Racing introduce a range of aluminium option parts for the proven HPI Racing Spring 2 touring car. Available soon are front steering knuckles, C-hubs, 3 degree toe-in rear hubs, front and rear lower A-arms as well as a ball-raced steering set and an aluminium motor mount post. All parts are CNC-machined from high-quality aluminium, they come orange anodised and the A-arm are equipped with bushings for the hinge pin to improve durability and to make for a smooth suspension movement. Also coming is a 4-piece set of 38mm steel CV-style driveshafts that improves drivetrain efficiency. The suspension parts come as pairs with a complete set of all of the above parts being available for those who wish to do a complete conversion at once.

Click here to view the other new parts

July 25, 2014

Hudy tire balance station adapter for 14mm hex wheels

Hudy introduce a new adapter for their proven universal tire balance station. Designed for the use with 14mm hex 1/10th buggy wheels the adapter comes with a CNC-machined aluminium holder and a ball raced 1-piece steel axle for maximum precision. A machined wheel nut makes for fast and convenient wheel tightening. The adapter is available separately with the actual tire balance station not being part of the package.

Click here to view more photos