Red RC » Brand

March 1, 2010

Hot Bodies new Cyclone prototype

As we reported yesterday, Japanese Hot Bodies factory driver Atsushi Hara won the TITC in Bangkok, Thailand. Along with his team mate Andy Moore, the double World Champion was using a prototype version of the new Cyclone touring car chassis and we have these exclusive photos of it. We weren’t given any specifics on the car itself other than it is a prototype and parts are subject to change, but both drivers were said to be very happy with the new car’s performance and with both making the A-main and Hara taking the win, it obviously works pretty well. What we can tell from the images is that it features a new LiPo only chassis plate and that there is a different belt orientation to help bring the motor closer to the car’s centre line. Other changes are the new longer top deck, which while not a single piece from front to back, it goes the entire length between the front and rear main axles, meeting just forward of the motor position and removing the aluminium chassis brace on the right side. There also appears to be new lower front wishbones along with aluminium steering blocks and with the steering servo orientated 90 degrees to standard, there is also a new servo saver system.

Click here for more images of the new car

March 1, 2010

V-Dezign dominate CARS Carpet Challenge

With less than a week to go before the EFRA Euros, the V-Dezign team had a final shakedown of their cars at the CARS Carpet Challenge in Chesterfield at the weekend. The meeting was dubbed as ‘The Euros Warmup’ as the same carpet was used as will be utilised at the Euros, all be it at a different venue on a different layout. The V-Dezign team dominated proceedings in the open modified category by securing the top 5 places in both qualifying and the A final! Team boss Vesa Yli also won the stock A final after starting 2nd on the grid. The team now head to the Euro’s full of confidence and will be looking to achieve some good results.

Click here for the modified results

March 1, 2010

Novarossi 2660 & 2084 tune pipes

Novarossi have introduced 2 new tuned pipes for the 2010 season, the first of which is the EFRA 2660 which is for the 1:10 Touring category. This new pipe may look similar to the last one, but some internal changes means that on the track this new pipe performs better throughout the rev range. Also new for the 1:8 Off-road category is the EFRA 2084, where the company’s quest for better drivability and lower fuel consumption resulted in this new tuned pipe. Falling into the ‘Super Strong’ range, it is more resistant to the rough world of 1:8 scale Off-road competition. Expect to see both in mid March.

Click here to see the 2084 pipe

March 1, 2010

Acorn Racing seeking team drivers

Acorn Racing is currently looking for both club and International drivers to strengthen their team in USA after confirming Speedworld RC, Mr. Billy Bowerman as their official USA distributor for the year 2010. Given Billy’s experience and devotion in the RC community for over 25 years with a list of accomplishments to promoting Nitro and Electric races, we are sure that this new relationship will be a successful one. If you think you will like to represent Acorn Racing Team USA in EP/GP classes for on-road and off-road racing and contemplating to join and represent the team in the USA be sure to contact ‘enquiries@acorninnovations.asia’ or ‘billy.bowerman@acorninnovations.asia’ along with a detailed R/C racing resume. This will be a 100% contracted sponsorship for National Racers and a partial sponsorship for club drivers. There will also be a program for racers using Acorn Racing Products to win money or discounts vouchers.

Source: Acorn Racing [acornracing.com]

March 1, 2010

J-Tech confirm Andrea Pirani for 2010

Italian company Marchetti Model Service, makers of the J-Tech brand of tires, have announced that top Italian driver Andrea Pirani will continue with their tires for the 2010 season. The former European Championship finalist, who will also continue with other sponsors Mugen, Novarossi and MLC fuel, will be using these tires again at this years Italian Nationals as well as the 1/8th scale European Championships that takes place this year in his home country, in Locorotondo.

Source: F.V.S.S. [fvssrc.com]

February 28, 2010

Losi 8ight Titanium parts & Great grease

Team Losi have introduced a number of optional titanium parts for their range of 8ight buggies and truggies. For the 8ight buggy their is this turnbuckle set (above), while there is a similar set for the truggy, both of which consist of 6 pieces and because of their new material, are super strong yet lightweight. For both cars there is also a set of 4 x 21mm hinge pins and also a set of 4 shock stand offs, also made from titanium. Losi have also released their simply named ‘Great Grease’. This is a high grade synthetic grease that stands up to both heat and cold as well as wet and dry with exceptional adhesion qualities. Ideal for spiral gears, CVDs and areas where you want the grease to adhere to moving parts it is supplied in an 8cc tube.

Click here to see the other products

February 27, 2010

Kyosho Inferno GT2 2-speed transmission

Kyosho have released a new shoe type 2-speed transmission for the Inferno GT2 touring car series that will soon be available. It replaces the old pin type clutch system that is found currently in all GT2 cars. A dramatic increase in bottom end acceleration is achieved by using a shoe type clutch system, this will greatly benefit all Inferno GT2 owners. The first gear combination features 15T/46T gears for strong acceleration. Second gear features a 19T/43T gear combination, which results in more top speed. So, you have the best of both worlds, strong acceleration and awesome top speed.

Source: Kyosho [kyoshoamerica.com]

February 27, 2010

Max Power 2078 1/8th circuit pipe

New for 2010, Max Power have introduced their latest 1/8th on road high performance pipe. After a long time with the EFRA 2018 pipe, Max has been able to improve speed and torque on the new EFRA 2078, thanks to a completely new shape of the cones and a new material that improves resonance and overall engine performance. Available in March.

Source: Max Power [rcmaxpower.com]