KM Racing have released a number of new pulleys for the Xray NT1 chassis. Available in 18T, 19T and 25T versions, all pulleys are made from hard anodized aluminium so they are lightweight and strong and their design and coating helps prevent the build up of dirt and debris.
Source: KM Racing [km-rc.com]
Swiss company SMP Racing, makers of the Slide 1/8th scale chassis which is no longer in production, have aimed their sites on the manufacture of aftermarket parts. Focusing on lightweight performance parts, they have released some new wheel axles for the Kyosho V-One RRR Evo, one pair made from titanium, weighing in at 6 grams and another set made from hard coated aluminium weighing 3 grams. Also new is a hard coated aluminum servo saver shaft for the Mugen MRX-4, which also weighs only 3 grams.
Click more to see the other products… content
Reedy have released a new version of the popular Wolfpack 3600mAh battery pack which is now available in a version featuring a whopping 9.6V of pure power. Assembled using Reedy’s 3600mAH high-tech SC-R cells in a configuration that drops straight into the Traxxas Slash, it comes supplied with a Traxxas High-Current Connector to deliver power to the ESC with less resistance and heat than ever before. To further minimize power-robbing resistance and heat, welded connections between each cell and thick 14AWG silicone power wires ensure maximum performance and reliability.
Source: Reedy [rc10.com]
King Headz have released this CNC machined 7075 aircraft grade aluminum engine mount for the Xray XB808. Designed with a base mount and removable top blocks, once installed in the vehicle and the gear mesh is set you can remove and reinstall the motor without resetting the mesh. Suitable for both a Nova based or Picco based motor, the mount has an extended leg that will help to reduce chassis flex near the flywheel hole. The top blocks are also available separately.
Source: King Headz [kingheads.com]
To get a long life out of your Novarossi based engine you will at some point need to replace the engine’s bearings. Because of high tolerances inside the crankcase however this can be a difficult and often not very precise task. To help with this Novarossi have released this ball bearing extractor tool. Available in blue anodized alloy the kit has multiple ball bearing adapters of different sizes, suitable for all rear ball bearing inner races that are used inside 2.1cc – 4.66cc NR based engines. The extractor tool is also available with just a single bearing adapter, ranging from 11mm to 14.5mm.
Source: Novarossi [novarossi.com]
X Factory have announced November 1st as the preliminary release date for the X-60 Conversion. The new conversion is suitable for an AE T4 truck to convert it to mid-motor, similar to the popular X-6 buggy. Photos show several interesting aspects of the new truck, firstly the mold for the rear control arms is done, and the Team is using production prototype arms. Since the beginning of testing, not a single graphite arm has failed, so this part of the program is complete. Second, X Factory has decided to go with a carbon fiber battery strap instead of the current molded strap. X Factory president Chazz said the following about the project –
We are closing in on it, and the release date is looking more and more doable. All the decisions have been finalized and now it’s a matter of making the parts and giving them a final test to make sure they’re OK. There are lots of potential stumbling blocks between now and release, but this project has been going more smoothly than anything we’ve done before, so I hope we can meet November first. The chassis mold is about one quarter done, and we hope to have production prototype chassies before the end of this month. The Boyz will start testing immediately, of course, but that will allow us to move forward on many other things. We’ll finalize the body at that point, an entire new design from one of the top body manufacturers that you’re going to love. And we’ll begin writing the instruction manual, which is never a simple task.
Click here for another picture and more information… content
The new Hitec HS-7985MG High Torque Digital Servo has the added benefit of the company’s new G2 second generation programmable digital circuit. This circuit has twice the resolution of their original circuit while adding programmable overload protection. The technology doesn’t stop at the circuit board, with a high performance coreless motor, dual ball bearing supported output shaft, bushing supported gear shafts and a Heavy Duty Metal gear train this servo was designed to withstand the stress of on/off road vehicles.
Source: Hitec [hitecrcd.com]
Xceed RC have announced the release of this high quality large black pit towel, it features the large Xceed logo and design on the front. Large enough to cover your pit area it is 140cm x 60cm.
Source: Xceed [xceedrc.com]
