SMJ have produced this convenient clutch holder that allows you to store a complete clutch as it has been taken from the engine. Simulating the end of the crankshaft the holder can be used to mount an entire clutch assembly from a .12 or .21 engine, keeping all the different parts and shims together. With the optional Infinity parts container you can keep your different clutches safely and conveniently stored, ready for when you need them.
Visually stunning, physically exhilarating, artfully balanced, the 1987 Chevy Camaro is all these things and more. One of the major reasons the JConcepts team underwent a project of this statue was to produce one of GM’s most sough-after vehicles of the 1980’s. A project originally started in October of 2020 has since seen some revisions along the way to accommodate an ever-changing Drag racing and Bashing segment in the RC market. A tight overall width to settle into today’s latest lineup of manufactured vehicles such as the DR10, 22S, and Drag Slash make the Camaro a fun and fit performer. Flat panel designs signified this generation and peaked during this era of the Camaro. Bucket headlights stand-out on the front-end with dual lights and bezels, the 87 looks so ominous. On top of the hood, two recessed ducts can be louvered out with the included decal sheet. The pointed front-end carries to the fenders, through the doors and back through the rear fender creating that transitional body line from top to bottom. Highly detailed recessed windows provide a large viewing area for the 2-door drag racer.
View more details & images here
Reedy’s WolfPack Shorty LiPo batteries are now available with the popular XT60 plug. This unique battery is perfectly suited for trail trucks, crawlers and a variety of vehicle types that use a shorty battery configuration. Wires exit the case through a rubber gasket that protects the wire’s insulation while helping to prevent moisture from entering the case. High quality cell manufacturing and construction techniques result in reliable operation and maximum cycle-life. Reedy’s latest WolfPack LiPo batteries come equipped with beefy silicone wires and an integrated balance lead with XH connector.
Source: Reedy [associatedelectrics.com]
JConcepts continues to muscle new scale off-road items into the market with the introduction of the Tusk 1.9” tire. After successful class 1 tires such as the Landmines and Bounty Hunters, the team focused on a new design with learned information by driving, crawling, and important input from a heap of development time by the JConcepts team. The team retained the 4.19” sizing making it an approved and scale-based tire, but the tread layout went under the scope for changes. The Tusk has an animal like instinct while it makes its way over terrain with hefty lugs and sidewall support. The centre of the tire starts with a V-shaped lug with multiple steps to the sides for additional grip while the green compound rubber flexes and contours to the landscape. The design team added large, staggered traction bars off the side continuing the V-shape pattern and while the shorter version steps in conjunction with the centre lug, the longer version fills a void underneath and meets up near the centre line of the tire.
View more information on the Tusk & Hunk tire here
The Revolution Design Racing Products +3mm chassis has been updated for the ultra-popular Team Associated B6.3 2wd buggy. As before, it mirrors the optimised length of the original B6.2 and B6.3 chassis to improve handling in high-bite track conditions such as carpet and Astroturf, making the car easier and faster to drive at the same time. Of course, the new chassis is prepared to accommodate new-generation servo mounts such as the B6.3 kit item or the RDRP LCG servo mount set. Machined from aircraft-grade 7075 aluminium for strength and optimised flex characteristics, the black anodised surface is the perfect basis for a stealthy looking high-performance model race car. As with the B6.2 version, the chassis comes with a low centre of gravity 7075-T6 motor plate that puts your motor as low as possible into the chassis cut out.
View more details & images here
RSRC, brand of multiple European Champion Renaud Savoya has updated their line of unique tools with new colours. The tools are now all available with a red & black handle and feature a gold 100mm long titanium nitride coated tip. The handle’s unique design ensures maximum torque and comfort and a full range is a available with hex tips available in 1.5mm, 2.0mm, 2.5mm, 2.5mm ball and 3.0mm with the nit drivers coming in 5.0mm (M2.5), 5.5mm (M3) and 7.0mm (M4).
T-Works have release their stainless steel chassis skid protector sets for the Team Associated RC10 B6.3/B6.2 buggy. The skid plates will provide additional chassis protection in the rear of the car, something that comes in handy especially when running on highly abrasive surfaces or on track with large jumps. The protector plates are made of high-quality stainless steel material for durability and corrosion resistance and come in a set of two.
Source: T-Works [rc-tworks.com]
Introducing ST Racing Concepts’ new line of option parts for the Traxxas Drag Slash. CNC machined aluminium front bumper improves durability of your Drag Slash and adds a bit of weight to the front of the vehicle to help prevent the front end from lifting during hard acceleration. The aluminium front caster blocks improve durability and add a great look to the Drag Slash, while the aluminium rear motor guard/Wheelie bar mount provides a solid mounting point for the rear wheelie bar and takes away any unwanted flex. Finally, the aluminium heat-sink finned motor plate improves heat dissipation of the motor and adds that factory look to your Drag Slash. All option parts are CNC machined from high quality aluminium and available in anodised blue, green, gun metal, red and silver.
